Shark WV200EU Vacuum Cleaner Manual

The Shark WV200EU is a powerful and versatile upright vacuum cleaner designed for home use. It features DuoClean technology for both carpets and hard floors, Anti-Allergen Complete Seal technology, LED headlights, a swivel steering handle, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, DuoClean floor nozzle, Dust cup with filter system, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
DuoClean Technology	Combines a bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Swivel Steering	Provides easy maneuverability around obstacles
Large Dust Cup	0.8L capacity, easy to empty without touching dirt
Power Cord	7.5 meters for extended reach
ON/OFF Switch	Powers the vacuum cleaner on and off
Floor Selector	Adjusts suction power for carpet or hard floor
Handle Release	Allows the handle to recline for under-furniture cleaning
Attachment Holder	Stores tools on the vacuum for easy access

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the handle: Align the handle with the main body until it clicks into place.
Install the floor nozzle: Connect the hose end to the nozzle and push until secure.
Attach the hose: Connect the hose to the rear port on the main body.
Install tools: Clip the crevice tool, upholstery tool, and dusting brush onto the attachment holder.
Plug into a standard 220-240V AC power outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Do not force connections.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Ensure the pre-motor and post-motor filters are in place.
Select floor type: Use the floor selector switch on the handle (Carpet/Hard Floor).
Power on: Plug in, then press the ON/OFF switch on the handle.
Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press the release button to detach and empty when full.

CAUTION! Do not vacuum large, hard, or sharp objects. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Model: Shark WV200EU.
Power: 700W motor.
Technology: DuoClean, Anti-Allergen Complete Seal.
Dust Cup Capacity: 0.8 Liters.
Cord Length: 7.5 meters.
Weight: 6.2 kg.
Noise Level: ≤78 dB(A).
Power Source: 220-240V AC, 50Hz.
Included Tools: Crevice tool, Upholstery tool, Dusting brush.
Warranty: 5-year limited warranty (register online).

Controls and Settings

Main controls located on the handle. Handle Features: ON/OFF switch, Floor selector (Carpet/Hard Floor), Handle release button.

Indicator Lights: LED headlights on floor nozzle (auto-on), Filter check light (flashes when filters need cleaning).

Suction Power: Automatically adjusts based on floor selector setting. For maximum suction on carpets, use "Carpet" mode. For delicate hard floors, use "Hard Floor" mode.

Using Attachments

For above-floor cleaning, detach the hose and connect desired tool.

Turn off and unplug the vacuum.
Press the hose release button and pull the hose from the main body.
Connect a tool (crevice, upholstery, dusting brush) to the end of the hose.
Plug in the vacuum, turn it on, and begin cleaning.
After use, store tools on the attachment holder.

Tip: Use the crevice tool for corners and edges. Use the upholstery tool for sofas and curtains. Use the dusting brush for shelves and blinds.

Cleaning Modes

The vacuum offers two primary cleaning modes.

Floor Cleaning: Use with the floor nozzle attached. Select "Carpet" or "Hard Floor" on the handle. Recline handle for cleaning under furniture.
Above-Floor Cleaning: Use with hose and attachments. Ideal for stairs, furniture, ceilings, and cars.
Spot Cleaning: For concentrated messes, use the hose with the appropriate tool in a focused area.

WARNING! Do not use the vacuum to pick up liquids, burning materials, or sharp objects. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty Dust Cup: Empty after each use or when the full indicator appears. Press release button, detach, and empty into trash.
Clean Filters: Rinse the pre-motor and post-motor filters under cold water every month. Allow to dry completely for 24 hours before reinstalling.
Check Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors if necessary.
Inspect Hose & Nozzle: Clear any blockages to maintain suction.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not operate with wet filters.

Safety Information

Read all instructions before use. Keep the manual for future reference.

This appliance is for household use only.
Do not use outdoors or on wet surfaces.
Do not pick up flammable or combustible materials.
Do not use with damaged cord or plug.
Keep the cord away from heated surfaces.
Supervise children when the appliance is in use.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (Low Voltage), 2014/30/EU (EMC), and 2011/65/EU (RoHS). The symbol of the crossed-out wheeled bin indicates separate collection for electrical and electronic equipment. For disposal, follow local regulations. For support, visit www.sharkclean.eu or contact your local Shark customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	No power / Faulty outlet	Check plug is fully inserted; try a different outlet; check household fuse/circuit breaker.
Loss of suction	Full dust cup / Blockage / Dirty filters	Empty dust cup; check hose, nozzle, and brushroll for blockages; clean or replace filters.
Brushroll not spinning	Hair/debris entanglement / Drive belt	Turn off, unplug, and clear brushroll of obstructions. Inspect drive belt for wear.
Vacuum is overheating	Blockage / Dirty filters	Turn off and unplug. Let cool for 60 minutes. Clear any blockages and clean filters.
Unusual noise or smell	Foreign object in airway / Motor issue	Turn off and unplug immediately. Check for and remove any foreign objects. Contact service if problem persists.

Reset: If the motor thermal cut-off activates, unplug and let cool for 60 minutes. Clear any blockages before restarting.

Service: For warranty service, contact Shark Customer Service at the number listed in your region or visit www.sharkclean.eu.