Shark WANDVAC WV406ANZ Vacuum Cleaner Manual

The Shark WANDVAC WV406ANZ is a lightweight, cordless stick vacuum designed for quick cleanups on both hard floors and carpets. It features a powerful motor, a removable and rechargeable battery, a washable dust cup and filter, a crevice tool, and a multi-surface brush roll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Charging 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Using the Vacuum 7. Emptying & Cleaning the Dust Cup 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Removable Battery, Charging Dock, Crevice Tool, Multi-Surface Brush Roll, Washable Foam and Felt Filter.

Feature	Description
Power Button	Turns vacuum on/off; press and hold for continuous use
Battery Indicator Lights	Shows remaining battery charge level
Removable Battery	Lithium-ion battery; charges on dock or when attached to vacuum
Dust Cup Release Button	Releases dust cup for emptying
Washable Filter	Foam and felt filter; clean every month for optimal performance
Crevice Tool	Attaches to nozzle for tight spaces and edges
Multi-Surface Brush Roll	Designed for both hard floors and carpets; detaches for cleaning
Charging Dock	Wall-mountable dock for convenient storage and charging
LED Headlights	Illuminates debris in dark areas
Lightweight Design	Easy to carry and maneuver for quick cleanups

Assembly & Charging

Unpack all components. Ensure all parts are present.

Insert the Battery: Align the battery with the slot on the vacuum handle and slide it in until it clicks.
Attach the Nozzle: Align the nozzle with the vacuum body and push until it clicks into place.
Mount the Charging Dock: Use included screws to mount the dock to a wall near an outlet, or place it on a stable surface.
Charge the Vacuum: Place the vacuum onto the dock, ensuring the charging contacts align. The battery indicator will light up during charging.

WARNING! Use only the provided charger and dock. Do not use a damaged battery or charger.

First-Time Use

Fully charge the battery before first use (approx. 3.5 hours).

Power On: Press and hold the Power Button. The vacuum will start and the battery indicator will show the charge level.
Select Surface: The multi-surface brush roll automatically adjusts. For delicate rugs, you can detach the nozzle and use the crevice tool.
Begin Cleaning: Glide the vacuum over floors using forward and back motions.
Power Off: Release the Power Button. The vacuum will turn off.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from the brush roll.

Specifications

Model: WANDVAC WV406ANZ
Type: Cordless Stick Vacuum
Battery: Rechargeable Lithium-ion, 22.2V
Charge Time: Approx. 3.5 hours
Run Time: Up to 20 minutes (varies with power mode and surface)
Dust Cup Capacity: 0.15 liters
Filtration: Washable Foam and Felt Filter
Attachments: Crevice Tool, Multi-Surface Brush Roll
Weight: Approx. 2.5 lbs (1.13 kg)
Input: 100-240V AC, 50/60Hz (for charger)

Controls and Indicators

Main control is the Power Button on the handle. Battery Indicator Lights are located near the button.

Power Button: Press and hold to operate. Release to turn off.

Battery Indicator (3 LEDs):
• 3 Lights Solid: High charge (70-100%)
• 2 Lights Solid: Medium charge (30-70%)
• 1 Light Solid: Low charge (5-30%)
• 1 Light Flashing: Very low charge (<5%), charge immediately.
• Lights Off: Battery depleted or not installed.

Dust Cup Release: Button on the back of the dust cup. Press to detach.

Using the Vacuum

For best results, ensure the dust cup is empty and filters are clean before use.

Check Battery: Ensure the vacuum is charged. A full charge provides up to 20 minutes of runtime.
Clear the Area: Pick up large debris or objects that could clog the vacuum.
Turn On: Press and hold the Power Button. Begin cleaning.
Use Attachments: To clean upholstery or tight spaces, detach the nozzle and attach the crevice tool directly to the vacuum hose.
Monitor the Dust Cup: Empty the dust cup when it reaches the MAX fill line.
Turn Off: Release the Power Button. Return the vacuum to the charging dock.

Tip: For embedded debris on carpets, use a slow, back-and-forth motion.

Emptying & Cleaning the Dust Cup

Empty the dust cup after every use for maximum suction.

Turn off and remove the vacuum from the dock.
Press the Dust Cup Release Button and pull the dust cup away from the vacuum body.
Hold the dust cup over a trash bin. Press the bottom release latch to open the door, allowing debris to fall out.
Close the door securely. Reattach the dust cup to the vacuum until it clicks.
For a thorough clean, the dust cup can be rinsed with water. Ensure it is completely dry before reusing.

WARNING! Do not use the vacuum without the dust cup and filter properly installed.

Maintenance & Care

Regular maintenance ensures peak performance and longevity.

Filter Cleaning (Monthly): Remove the foam and felt filter from the dust cup. Rinse under lukewarm water until water runs clear. Squeeze out excess water and let air dry completely for at least 24 hours before reinstalling.
Brush Roll Cleaning (As Needed): Detach the nozzle. Use scissors to carefully cut away any wrapped hair or fibers from the brush roll. Wipe the brush roll clean.
Charging Contacts: Periodically wipe the metal charging contacts on the vacuum and dock with a dry cloth to ensure a good connection.
Battery Care: For longest battery life, store the vacuum in a cool, dry place. Avoid fully depleting the battery frequently.

CAUTION! Do not use the vacuum with wet filters or components. Ensure all parts are completely dry before reassembly.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This product contains a lithium-ion battery. Do not incinerate or expose to high heat. For battery disposal, follow local regulations. Copyright © SharkNinja Operating LLC. SHARK and WANDVAC are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted/not installed	Place on charger; ensure battery is fully inserted and clicks.
Reduced suction or runtime	Full dust cup; clog; dirty filter	Empty dust cup; check hose and nozzle for blockages; wash and dry filter.
Brush roll not spinning	Hair/debris tangled; obstruction	Turn off, detach nozzle, and clear brush roll of any wrapped debris.
Battery not charging	Poor contact; faulty outlet	Clean charging contacts; try a different outlet; ensure vacuum is seated correctly on dock.
Vacuum turns off during use	Overheating; battery protection	Allow vacuum to cool for 45-60 minutes. Check and clean filters.
Unusual noise	Foreign object in impeller or brush roll	Turn off immediately. Check dust cup, hose, and brush roll for obstructions.

Reset: Remove and reinsert the battery. Place on charger.

Service: For issues not resolved above, contact Shark Customer Service at 1-800-798-7398 or visit sharkclean.com.