Shark WANDVAC WV400 Series Vacuum Cleaner Manual

The Shark WANDVAC WV400 Series is a powerful, lightweight cordless stick vacuum designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a high-efficiency motor, LED headlights, a removable battery, multiple attachments, and a convenient charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, motorized floor nozzle, crevice tool, dusting brush, charging dock, removable battery, and wall mount.

Assembly & Setup

Unpack all components and inspect for damage.

1. Insert the battery: Align battery with slot on vacuum body and click into place.
2. Attach the wand: Insert wand into vacuum body until it clicks securely.
3. Attach floor nozzle: Connect floor nozzle to wand end until it clicks.
4. Install charging dock: Place dock on a flat surface or mount on wall using included hardware.
5. Charge the vacuum: Place vacuum onto dock, ensuring charging contacts align.

WARNING! Do not use vacuum if any parts are damaged. Ensure all connections are secure before operation.

First-Time Use

Fully charge the vacuum before first use (approx. 3.5 hours).

1. Power on: Press and hold the power button on the handle.
2. Select suction mode: Use mode button to toggle between Eco (standard) and Max (high power).
3. Begin cleaning: Push vacuum forward and back on floors; use wand release for handheld cleaning.
4. Use attachments: Detach wand and connect desired tool for upholstery, crevices, or dusting.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model Series: WV400, WV402, WV405 (varies by region/kit).
• Power Source: Rechargeable 25.2V lithium-ion battery.
• Runtime: Up to 30 minutes in Eco mode; up to 15 minutes in Max mode.
• Charge Time: Approximately 3.5 hours for full charge.
• Dust Cup Capacity: 0.5 dry quarts.
• Weight: 4.85 lbs (with battery and floor nozzle).
• Filtration: Washable pre-motor and post-motor filters; HEPA-grade possible.
• Attachments Included: Motorized floor nozzle, crevice tool, dusting brush.
• Warranty: Limited 5-year warranty (see manual for details).

Controls and Parts

Main Controls: Power button (on handle), Suction Mode button (Eco/Max), Wand Release button, Dust Cup Empty button.

Key Parts: Handle with controls, Main body with dust cup, Removable battery, Motorized floor nozzle, Wand, Charging contacts, LED headlights, Brushroll, Filters (pre-motor and post-motor).

Operation: Press power button to start; press again to turn off. Use mode button to switch suction power. Press wand release to detach handheld unit. Press dust cup empty button to release debris.

Using Attachments

For above-floor cleaning: Detach wand by pressing release button.

1. Crevice Tool: For tight spaces, corners, and between cushions.
2. Dusting Brush: For delicate surfaces, shelves, blinds, and electronics.
3. Upholstery Tool (if included): For sofas, chairs, and stairs.
4. Motorized Floor Nozzle: For carpets and hard floors; detach to clean brushroll.

Tip: Ensure attachments click firmly into place before use.

Emptying the Dust Cup

Empty dust cup after each use or when full.

1. Turn off vacuum and remove from charger.
2. Hold dust cup over trash bin.
3. Press the empty release button; bottom door opens to release debris.
4. Close door securely until it clicks.
5. For thorough cleaning: Remove dust cup by pressing release latch; rinse with water and dry completely before reattaching.

WARNING! Do not use vacuum with wet debris or liquids. Ensure dust cup is completely dry before reuse.

Battery & Charging

Use only Shark-approved charger and battery.

• Charging: Place vacuum on dock; charging indicator light will illuminate. Solid light = charging; off = fully charged.
• Battery Removal: Press battery release buttons on both sides and pull battery out.
• Storage: Store vacuum and battery in a cool, dry place away from direct sunlight.
• Battery Life: For best performance, fully discharge and recharge battery monthly.

CAUTION! Do not expose battery to fire, water, or extreme temperatures. Do not attempt to disassemble battery.

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Clean filters every month: Remove pre-motor and post-motor filters; rinse with water only and air dry for 24 hours before reinstalling.
2. Clear brushroll: Remove floor nozzle; cut away hair and fibers wrapped around brushroll.
3. Wipe exterior: Use a dry cloth to clean vacuum body and attachments.
4. Check for blockages: If suction is reduced, inspect hose, wand, and nozzle for obstructions.

CAUTION! Unplug charger and remove battery before performing maintenance. Never use vacuum without filters installed.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions including no harmful interference. ICES-003 Compliance: This Class B digital apparatus complies with Canadian ICES-003. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle according to local regulations. Copyright © SharkNinja Operating LLC. Shark, WANDVAC, and associated designs are trademarks of SharkNinja. For support, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

Reset: Remove and reinsert battery; place on charger for 10 seconds.

Service: 1-800-798-7398; sharkclean.com