Shark WANDVAC WV361EU Vacuum Cleaner Manual

The Shark WANDVAC WV361EU is a lightweight, cordless stick vacuum cleaner designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, LED headlights, a removable handheld pod, a washable filter, a wall-mountable charging dock, and multiple attachments for various surfaces. Below are key sections covering safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Using Attachments 7. Cleaning Modes & Operation 8. Emptying the Dust Cup 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Removable battery, Charging dock, Crevice tool, Dusting brush, Multi-surface floor nozzle with LED lights.

FeatureDescription
Power ButtonTurns vacuum on/off; press and hold for continuous use
Battery Indicator LEDShows battery charge level (Green/Amber/Red)
Dust Cup Release ButtonReleases dust cup for emptying
Handheld Pod ReleaseButton to detach vacuum pod for above-floor cleaning
Washable FilterFoam and felt filter; removable for cleaning
LED HeadlightsIlluminates dark areas under furniture
Charging DockWall-mountable dock for storage and charging
Multi-Surface Floor NozzleFor hard floors and low-pile carpets; motorized brush roll
Crevice ToolFor tight spaces, corners, and edges
Dusting BrushFor delicate surfaces, shelves, and upholstery

Assembly & Installation

Unpack all parts and inspect for damage.

  1. Insert the battery: Align battery with slot on vacuum body and click into place.
  2. Attach the floor nozzle: Connect the wand to the floor nozzle until it clicks.
  3. Mount the charging dock: Use included screws to mount dock on wall near outlet.
  4. Place vacuum on dock: Ensure charging contacts align; LED will indicate charging.

WARNING! Ensure vacuum is powered off during assembly. Keep small parts away from children.

First-Time Setup

Charge fully before first use.

  1. Initial charge: Place vacuum on dock; charge for approx. 3.5 hours until battery LED is solid green.
  2. Test operation: Press power button to ensure motor runs.
  3. Attach tools: Connect crevice tool or dusting brush as needed.
  4. Adjust settings: Familiarize yourself with power modes (if applicable).

CAUTION! Use only the provided charger and dock. Do not use if battery is damaged.

Specifications

Controls and Indicators

Main controls located on vacuum body. Power Button: Press to start; release to stop (or press again). Battery LED: Green (high charge), Amber (medium), Red (low), Flashing Red (needs charge).

Charging Dock LED: Red (charging), Green (fully charged). Dust Cup Release: Press to detach dust cup. Handheld Release: Button to detach pod for handheld use.

Operation Modes: Standard cleaning (full power); Eco mode (extended run time, if applicable).

Using Attachments

Attach tools to wand or handheld pod.

  1. Detach handheld pod: Press release button and lift off wand.
  2. Connect tool: Insert crevice tool or dusting brush into pod until secure.
  3. Reattach to wand: For extended reach, reconnect pod to wand.
  4. Select floor nozzle: For floors, use motorized floor nozzle.

Tip: Ensure attachments are firmly clicked into place to prevent disconnection during use.

Cleaning Modes & Operation

For floors, above-floor surfaces, and tight spaces.

  1. Turn on: Press power button; LED indicates battery level.
  2. Floor cleaning: Glide floor nozzle back and forth; LED lights illuminate debris.
  3. Above-floor cleaning: Detach pod, attach tool, clean upholstery, shelves, etc.
  4. Turn off: Press power button or release trigger (if applicable).
  5. Return to dock: Place vacuum on dock to recharge after use.

WARNING! Do not vacuum liquids, hot ashes, or sharp objects. Keep hair and loose clothing away from brush roll.

Emptying the Dust Cup

Empty when dust reaches MAX line.

  1. Turn off and remove from dock.
  2. Press dust cup release button; pull cup away from body.
  3. Hold over trash; press bottom release to open door and empty contents.
  4. Close door; reattach cup until it clicks.

CAUTION! Empty dust cup outdoors or in well-ventilated area to minimize dust exposure.

Care & Maintenance

Regular maintenance ensures optimal performance.

CAUTION! Do not operate with wet filter. Ensure all parts are completely dry before reassembly.

Regulatory Information

CE marked; complies with EU directives. Battery must be recycled or disposed of separately from household waste. For EU compliance, refer to local regulations. Copyright © SharkNinja Operating LLC. Shark and WANDVAC are trademarks. For support, visit www.sharkclean.eu or contact local customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted/not connectedCharge on dock; ensure battery is properly inserted.
Reduced suctionFull dust cup/blockage/dirty filterEmpty dust cup; check for blockages; clean filter.
Brush roll not spinningDebris tangled/obstructionTurn off, clear debris from brush roll.
Battery not chargingDirty contacts/faulty outletClean charging contacts on vacuum and dock; try different outlet.
Vacuum turns off during useOverheating/battery protectionAllow to cool; recharge battery fully.

Reset: Remove battery for 60 seconds, then reinsert.

Service: Contact authorized service center; do not attempt repairs yourself.

Shark WANDVAC WV361EU Vacuum Cleaner Manual © - All Rights Reserved 2025