Shark WANDVAC WV203ANZ Vacuum Cleaner Manual

The Shark WANDVAC WV203ANZ is a lightweight, cordless stick vacuum cleaner designed for quick cleanups and versatile use. It features a powerful motor, washable dust cup, LED headlights, crevice tool, and multi-surface brush roll. Powered by a rechargeable lithium-ion battery with a charging dock, it offers multiple suction modes, easy-empty technology, and a compact, upright storage design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main body with motor, Dust Cup, Battery, Charging Dock, Crevice Tool, Multi-Surface Brush Roll, LED Headlights, Power Button, Suction Mode Selector.

Assembly & Setup

Unpack and inspect all contents. Ensure all parts are present and undamaged.

1. Charge the battery: Place vacuum on charging dock and plug dock into a standard 120V AC outlet. Initial charge time: approx. 3.5 hours.
2. Attach accessories: Press crevice tool onto nozzle until it clicks into place.
3. Install dust cup: Ensure dust cup is securely locked into main body.
4. Mount charging dock: Use included screws to mount dock on wall if desired.

WARNING! Only use the provided charging dock and power adapter. Do not use if any part is damaged.

First-Time Use

Ensure vacuum is fully charged before first use.

1. Power on: Press Power Button; vacuum will start in Normal mode.
2. Select suction mode: Press Power Button again to cycle through Eco (long runtime), Normal (balanced), Max (maximum suction).
3. Begin cleaning: Glide vacuum over floors using forward/backward motions.
4. Use attachments: Detach handle to use as a handheld vacuum with crevice tool for upholstery, stairs, or car interiors.
5. Empty dust cup: Press release button, remove cup, and empty debris into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

• Model: Shark WANDVAC WV203ANZ.
• Type: Cordless Stick Vacuum.
• Power Source: Rechargeable Lithium-Ion Battery.
• Charging Time: Approx. 3.5 hours.
• Run Time: Up to 30 minutes (varies by mode).
• Suction Modes: Eco, Normal, Max.
• Dust Cup Capacity: 0.15 gallons (0.57 liters).
• Weight: Approx. 3.5 lbs (1.6 kg).
• Included Accessories: Charging Dock, Crevice Tool, Multi-Surface Brush Roll.
• Filtration: Washable Dust Cup and Filter.

Controls and Settings

Main controls located on handle. Power Button: Turns on/off, cycles modes. Battery Indicator: 3 LED lights (Green: High charge, Amber: Medium, Red: Low/charging).

Suction Modes: Eco (quiet, extended runtime), Normal (everyday cleaning), Max (deep cleaning for high-traffic areas).

To check battery: Press Power Button briefly; LED indicator will show charge level. To reset: If vacuum stops unexpectedly, place on charging dock for 10 seconds, then remove and restart.

Attachments & Accessories

Crevice Tool: For tight spaces, between cushions, along edges. Multi-Surface Brush Roll: For carpets and hard floors; detachable for cleaning.

1. To attach: Align accessory with nozzle and push until click is heard.
2. To detach: Press release button near connection point and pull accessory away.
3. Cleaning brush roll: Remove roll by pressing side tabs; clear any wrapped hair or debris.

Tip: Store accessories on charging dock or in a dry place when not in use.

Cleaning Modes & Techniques

Optimize cleaning based on surface and debris type.

1. Hard Floors: Use Normal or Eco mode; glide smoothly to pick up dust and crumbs.
2. Carpets & Rugs: Use Normal or Max mode; use slower strokes for embedded dirt.
3. Above-Floor Cleaning: Detach handle to use as handheld; attach crevice tool for furniture, blinds, car seats.
4. Quick Pickups: Use Eco mode for small messes to conserve battery.
5. LED Headlights: Automatically turn on to reveal hidden debris under furniture.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects that could damage filter or dust cup.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use: Press release button, empty contents, reattach.
2. Clean filter monthly: Remove filter from dust cup, rinse under cold water, air dry completely for 24 hours before reinstalling.
3. Clear brush roll weekly: Remove roll, cut away wrapped hair or strings with scissors.
4. Check for blockages: If suction decreases, inspect nozzle, hose, and dust cup for clogs.
5. Store properly: Place vacuum on charging dock to keep battery charged and unit ready.

CAUTION! Do not use vacuum without filter installed. Ensure all parts are completely dry before reassembly.

Safety Information

Read all instructions before use. Keep vacuum away from children and pets during operation. Unplug charger when not in use. Do not charge near heat sources or in direct sunlight. Use only Shark-approved replacement parts.

WARNING! Risk of fire or electric shock. Do not modify charger or use with damaged cord. If vacuum is damaged, discontinue use and contact customer service.

Regulatory Information

FCC Part 15 Compliance: This device complies with Class B digital device limits for residential use. Copyright © SharkNinja Operating LLC. Shark and WANDVAC are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Place on charger for 10 seconds, then remove. If issues persist, contact support.

Service: 1-800-798-7398; sharkclean.com