Shark WANDVAC WV201QSLV Vacuum Cleaner Manual

The Shark WANDVAC WV201QSLV is a lightweight, cordless stick vacuum designed for quick cleanups and versatile use on various surfaces. It features a powerful digital motor, a removable battery, a washable filter, a motorized brush roll for carpets, a crevice tool, and a charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Using the Vacuum 7. Cleaning & Maintenance 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Motorized floor nozzle, Removable battery, Charging dock, Crevice tool, Washable filter, Power button, Battery indicator lights.

Feature	Description
Digital Motor	Provides strong suction for effective cleaning
Removable Battery	Lithium-ion battery for cordless operation; charges on dock
Motorized Brush Roll	Agitates carpets to lift embedded dirt and pet hair
Washable Filter	Captures fine dust; can be rinsed and reused
Crevice Tool	Attaches for cleaning tight spaces and edges
Charging Dock	Wall-mountable dock for convenient storage and charging
Power Button	Turns vacuum on/off; press and hold for boost mode
Battery Indicator	LED lights show remaining battery charge
Lightweight Design	Easy to carry and maneuver around the home
Dust Cup Release	Button to empty collected debris into trash

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Insert the battery: Align battery with slot on vacuum body and push until it clicks.
Attach the floor nozzle: Align nozzle with vacuum body and push until it locks.
Mount the charging dock: Use included screws to mount dock on wall near outlet.
Place vacuum on dock: Ensure charging contacts align; LED will indicate charging.

WARNING! Ensure vacuum is powered off during assembly. Keep small parts away from children.

First-Time Use

Fully charge battery before initial use.

Charge: Place vacuum on dock; charge until all battery LEDs are solid (approx. 3.5 hours).
Power on: Press power button; select standard or boost mode (hold button for boost).
Test surfaces: Use on hard floors and carpets to familiarize yourself with performance.
Empty dust cup: Press release button over trash can to empty after use.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

Model: Shark WANDVAC WV201QSLV.
Type: Cordless stick vacuum.
Battery: Rechargeable lithium-ion, removable.
Run Time: Up to 30 minutes (standard mode); up to 15 minutes (boost mode).
Charging Time: Approximately 3.5 hours to full.
Filter: Washable fine dust filter.
Dust Cup Capacity: 0.15 dry quarts.
Attachments: Motorized floor nozzle, crevice tool.
Weight: 3.5 lbs.
Input: 100-240V AC, 50/60Hz for charging.

Controls and Indicators

Main controls located on vacuum body. Power Button: Press to turn on/off; press and hold for boost mode. Battery Indicator LEDs: Show charge level (3 LEDs = high, 1 LED = low).

Charging Dock: LED on dock indicates charging status (red = charging, green = fully charged).

Operation Modes: Standard (normal suction), Boost (increased suction for tough messes).

Using the Vacuum

For floors: Use motorized nozzle on carpets and hard floors. For above-floor cleaning: Detach vacuum from nozzle to use as handheld.

Ensure battery is charged and dust cup is empty.
Press power button to start; select mode.
Move vacuum slowly forward and backward over area.
For edges and crevices, attach crevice tool.
When finished, press power button to turn off.
Empty dust cup and clean filter as needed.

Tip: For best results on carpets, make multiple passes in different directions.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup after each use: Press release button, empty debris, close securely.
Clean filter monthly: Remove filter, rinse under cold water, air dry completely for 24 hours before reinstalling.
Clear brush roll: Remove nozzle, cut away any wrapped hair or fibers with scissors.
Wipe exterior: Use dry cloth to clean vacuum body and dock.

WARNING! Do not use vacuum without filter installed. Ensure all parts are completely dry before reassembly.

Battery & Charging

Battery is removable and rechargeable.

Charging: Place vacuum on dock; charging LED will illuminate. Run Time: Varies based on mode and surface. Battery Care: For storage longer than 30 days, charge battery to 50% and store in cool, dry place. Replacement: Use only Shark-approved replacement batteries.

Care & Storage

Store vacuum on charging dock when not in use. Keep away from heat and direct sunlight.

CAUTION! Do not store with battery fully depleted. Do not expose to temperatures above 104°F (40°C).

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted/not connected	Charge battery on dock; ensure battery is fully inserted and clicked into place.
Reduced suction	Full dust cup/clogged filter	Empty dust cup; clean filter; check hose and nozzle for blockages.
Brush roll not spinning	Obstruction in nozzle	Turn off vacuum, remove nozzle, clear hair and debris from brush roll.
Battery not charging	Poor contact/dock issue	Clean charging contacts on vacuum and dock; ensure dock is plugged in.
Vacuum turns off during use	Overheating/battery protection	Allow vacuum to cool for 45 minutes; ensure filter is clean and not wet.

Reset: Remove and reinsert battery if vacuum becomes unresponsive.

Service: 1-800-798-7398; sharkclean.com