Shark WANDVAC WV201QPL Vacuum Cleaner Manual

The Shark WANDVAC WV201QPL is a lightweight, cordless stick vacuum cleaner designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, removable battery, washable filter, LED headlights, and multiple attachments for various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motor unit with removable battery, Wand, Floor nozzle with LED lights, Crevice tool, Dusting brush, Charging dock, Wall mount.

FeatureDescription
Powerful SuctionHigh-efficiency motor for strong pickup on various surfaces
Removable BatteryLithium-ion battery with up to 30 minutes runtime
LED HeadlightsIlluminates hidden debris under furniture
Washable FilterReusable foam and felt filter for easy maintenance
Lightweight DesignUnder 3 lbs for easy handling and storage
Multi-Surface CleaningAdjustable settings for hard floors and carpets
Charging DockConvenient wall-mountable charging station
Crevice ToolFor tight spaces and corners
Dusting BrushGentle cleaning for delicate surfaces
POWER ButtonTurns vacuum on/off; controls suction power

Assembly & Setup

Unpack and inspect all components. Ensure all parts are present.

  1. Attach wand to motor unit: Align arrows and push until click is heard.
  2. Attach floor nozzle: Insert wand into nozzle until secure.
  3. Install battery: Slide battery into motor unit until locked.
  4. Mount charging dock: Use screws provided to mount on wall near outlet.
  5. Charge vacuum: Place vacuum on dock; charging indicator will light.

WARNING! Do not force connections. Ensure vacuum is off during assembly.

First-Time Use

Fully charge battery before first use (approx. 4 hours).

  1. Power on: Press POWER button; LED indicator shows battery level.
  2. Select mode: Use POWER button to toggle between standard and boost suction.
  3. Begin cleaning: Move vacuum slowly over surfaces for optimal pickup.
  4. Empty dust cup: Press release button to detach and empty when full.

CAUTION! Do not vacuum liquids, large objects, or hot ashes.

Specifications

Controls and Settings

Motor unit controls: POWER button (on/off and mode selection), Battery indicator LEDs.

Operation: Press POWER once for standard suction; press again for boost mode; press third time to turn off.

Battery indicator: 3 LEDs show charge level (green = high, amber = medium, red = low). Charging: LED pulses red while charging; solid green when fully charged. Maintenance: Filter release button, Dust cup release button.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

  1. Detach floor nozzle: Press release button on wand.
  2. Attach tool: Insert crevice tool or dusting brush into wand end.
  3. Clean: Use for upholstery, ceilings, blinds, and tight spaces.
  4. Store: Hang attachments on wall mount or store in included bag.

Tip: Ensure vacuum is off before changing attachments.

Cleaning Modes

Two suction modes for different cleaning needs.

  1. Standard Mode: For everyday cleaning on hard floors and low-pile carpets.
  2. Boost Mode: For deep cleaning on high-pile carpets and concentrated debris.
  3. LED Lights: Automatically illuminate in dark areas.
  4. Wand Adjustment: Bend wand to clean under furniture without stooping.

WARNING! Do not run vacuum continuously in boost mode for extended periods to preserve battery life.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use: Press release button, empty contents.
  2. Clean filter monthly: Remove filter, rinse under cold water, air dry 24 hours.
  3. Check for blockages: Inspect nozzle, wand, and hose if suction decreases.
  4. Clean brush roll: Remove hair and debris from floor nozzle brush roll.
  5. Store properly: Place on charging dock or hang on wall mount.

CAUTION! Do not use vacuum without filter. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery dead/not installedCharge battery; ensure properly seated.
Reduced suctionFull dust cup/blockageEmpty dust cup; check for clogs in nozzle/wand.
Battery not chargingDirty contacts/dock issueClean charging contacts; ensure dock is plugged in.
Brush roll not spinningDebris entanglementTurn off, remove debris from brush roll.
OverheatingContinuous use/blockageTurn off, let cool 30 minutes; check for blockages.

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com

Shark WANDVAC WV201QPL Vacuum Cleaner Manual © - All Rights Reserved 2025