Shark WANDVAC WV201Q Series Vacuum Cleaner Manual

The Shark WANDVAC WV201Q Series is a lightweight, cordless, handheld vacuum cleaner designed for quick cleanups. It features a powerful motor, washable dust cup, crevice tool, multi-surface brush, LED headlights, and a wall-mountable charging dock. Powered by a rechargeable lithium-ion battery, it offers multiple power modes and is ideal for cleaning hard floors, carpets, stairs, and car interiors. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, Charging Dock, Crevice Tool, Multi-Surface Brush, Washable Dust Cup, LED headlights, Power button with mode selection.

Parts and Components

Unpack and inspect all contents. Ensure all parts are present and undamaged.

1. Main Vacuum Unit: Contains motor, battery, dust cup, and power button.
2. Charging Dock: Plugs into wall outlet; mounts on wall if desired.
3. Crevice Tool: Long, narrow attachment for edges and tight spaces.
4. Multi-Surface Brush: Wide brush roll for floors and carpets.
5. User Manual and Warranty Card.

WARNING! Do not use if any part is damaged. Contact Shark Customer Service.

Initial Setup and Charging

Before first use, fully charge the vacuum.

1. Plug the charging dock into a standard 120V AC wall outlet.
2. Place the vacuum onto the dock, ensuring charging contacts align.
3. Charging indicator light will illuminate (red while charging, blue when fully charged).
4. Initial charge time: Approximately 3.5 hours for a full charge.
5. After charging, remove from dock and press the power button to start.

CAUTION! Use only the provided charging dock and adapter. Do not charge near water.

Specifications

• Model: WANDVAC WV201Q Series.
• Power Source: Rechargeable lithium-ion battery.
• Charging Time: Approx. 3.5 hours.
• Run Time: Up to 20 minutes (Eco mode), up to 10 minutes (Boost mode).
• Dust Cup Capacity: 0.15 quarts (dry).
• Weight: Approx. 2.5 lbs.
• Attachments: Crevice tool, multi-surface brush.
• Filters: Washable pre-motor and post-motor foam and felt filters.
• Input: 100-240V AC, 50/60Hz for charger.

Controls and Operation

Power Button: Press once for Eco mode (standard suction, longer runtime). Press again for Boost mode (maximum suction, shorter runtime). Press a third time to turn off.

LED Indicators: Battery status light on vacuum body. Red: Charging or low battery. Blue: Fully charged or operating normally.

To use: Ensure dust cup is empty and filters are clean. Attach desired tool directly to nozzle or use without attachment for general cleaning. Press power button to select mode. Move vacuum slowly over surface for best results. LED headlights turn on automatically when vacuum is running.

Using Attachments

Attachments click securely into place on the vacuum nozzle.

1. Multi-Surface Brush: Ideal for hard floors and low-pile carpets. Brush roll helps agitate debris.
2. Crevice Tool: Perfect for corners, between cushions, along baseboards, and in car interiors.
3. Using Without Attachment: The bare nozzle is effective for quick pickups on flat surfaces.

Tip: For best performance, clean attachment brushes and openings regularly to prevent clogs.

Emptying and Cleaning the Dust Cup

Empty dust cup after each use or when full to maintain suction.

1. Turn off and unplug vacuum from charger.
2. Press the dust cup release button and pull cup away from body.
3. Hold over trash can and press the bottom latch to open the door, releasing debris.
4. For thorough cleaning, the dust cup can be rinsed with water. Ensure it is completely dry before reassembling.
5. Reattach by aligning and pressing until it clicks into place.

WARNING! Do not use vacuum with wet debris or liquids. Do not immerse main body in water.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

Filter Cleaning: Remove and wash foam and felt filters every month or as needed. Rinse under lukewarm water until water runs clear. Squeeze out excess water and air dry completely for 24 hours before reinstalling.

Cleaning Attachments: Remove hair and debris from brush rolls. Wipe surfaces with a dry cloth.

Battery Care: For longest battery life, store in a cool, dry place. Avoid complete discharges; recharge when battery is low.

CAUTION! Always ensure all parts are completely dry before reassembly and use.

Regulatory and Safety Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and WANDVAC are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Important Safety Instructions: Read all instructions before use. Use only as described. Not for outdoor use. Keep hair, loose clothing, fingers, and all parts of body away from openings. Do not use to pick up liquids or wet debris. Do not use with damaged cord or plug. Unplug before servicing.

Troubleshooting

Reset: If unit behaves unexpectedly, remove from charger, hold power button for 10 seconds, then recharge fully.

Service: 1-800-798-7398; sharkclean.com