Shark WANDVAC WV201GNBRN Vacuum Cleaner Manual

The Shark WANDVAC WV201GNBRN is a lightweight, cordless stick vacuum designed for quick cleanups. It features a powerful motor, a removable battery, a washable filter, a crevice tool, and a motorized brush roll for carpets and hard floors. The vacuum offers multiple suction modes, a LED headlight, and a wall-mountable charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Using the Vacuum 7. Maintenance & Cleaning 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Motorized brush roll, Removable battery, Charging dock, Crevice tool, Washable filter, LED headlight.

FeatureDescription
Power ButtonTurns vacuum on/off; cycles through suction modes
Battery Release ButtonReleases the battery for charging or replacement
Dust Cup ReleaseOpens the dust cup for emptying
Motorized Brush RollAgitates carpets and picks up debris; auto-shuts off on hard floors
LED HeadlightIlluminates dark areas under furniture
Crevice ToolAttaches for cleaning tight spaces and edges
Washable FilterCaptures fine dust; can be rinsed and reused
Charging DockWall-mountable for convenient storage and charging
Battery IndicatorLED lights show remaining battery charge
Suction ModesEco (standard) and Boost (max) for different cleaning needs

Assembly & Installation

Unpack and inspect all contents. Assemble the vacuum for first use.

  1. Insert the battery: Align and slide the battery into the vacuum body until it clicks.
  2. Attach the brush roll: Ensure it is properly seated in the cleaning head.
  3. Mount the charging dock: Use included screws to mount on wall near an outlet.
  4. Place vacuum on dock: Align contacts to charge.

WARNING! Ensure the vacuum is turned off and the battery is not inserted during assembly to prevent accidental startup.

First-Time Setup

Charge the vacuum fully before first use.

  1. Charge the battery: Place vacuum on dock; LED will indicate charging (red) and full (green).
  2. Install the filter: Remove dust cup, insert the washable filter, and reassemble.
  3. Test the vacuum: Press the power button to ensure it turns on and the brush roll spins.
  4. Attach crevice tool: For detailed cleaning, snap the tool onto the vacuum nozzle.

CAUTION! Do not use the vacuum without the filter installed, as this may damage the motor.

Specifications

Controls and Indicators

Main controls are located on the vacuum handle. Indicators show battery status and mode.

Power Button: Press once for Eco mode, press again for Boost mode, press a third time to turn off.

Battery Indicator LEDs: Three LEDs show charge level (3=high, 1=low, flashing=needs charge).

Brush Roll Indicator: LED on cleaning head lights when brush roll is active.

Charging Dock LED: Red while charging, green when fully charged.

Using the Vacuum

For best results, use the appropriate mode and technique.

  1. Turn on: Press the power button; select Eco for general cleaning or Boost for heavy debris.
  2. Vacuum floors: Glide the vacuum forward and back; the brush roll automatically adjusts.
  3. Use crevice tool: Attach for edges, corners, and upholstery.
  4. Empty dust cup: Press release button, hold over trash, and empty when full.
  5. Turn off: Press power button until all lights turn off.

Tip: For large debris, use Boost mode. For maintenance cleaning, Eco mode saves battery.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filter monthly: Remove, tap out dust, rinse under cold water, and air dry 24 hours.
  3. Clear brush roll weekly: Remove hair and debris wrapped around the roll.
  4. Check for blockages: Inspect nozzle, hose, and dust cup if suction decreases.
  5. Wipe exterior: Use a dry cloth to clean the vacuum body.

WARNING! Do not use the vacuum without the filter, and ensure filter is completely dry before reinserting.

Battery & Charging

The rechargeable battery provides cordless convenience.

CAUTION! Do not expose battery to fire, water, or extreme temperatures. Do not attempt to disassemble.

Care & Storage

Store the vacuum properly to prolong its life.

Always store on the charging dock to keep the battery charged. Keep in a dry, cool place away from direct sunlight. Do not store with a full dust cup. Keep accessories together.

CAUTION! Do not hang vacuum by the hose or cord (not applicable). Do not store near heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not charged/insertedCharge battery fully; ensure it is clicked into place.
Weak suctionFull dust cup/clogged filter/blockageEmpty dust cup; clean filter; check for blockages in nozzle and hose.
Brush roll not spinningHair/debris tangled; not on carpet modeClean brush roll; ensure vacuum is on a carpet surface (auto-sensor).
Battery drains quicklyOld battery; using Boost mode extensivelyUse Eco mode for regular cleaning; consider battery replacement if old.
Vacuum not chargingDirty contacts; faulty outlet/dockClean charging contacts on vacuum and dock; try different outlet.
Unusual noiseForeign object in brush roll or impellerTurn off, inspect and remove debris from brush roll and air path.

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com

Shark WANDVAC WV201GNBRN Vacuum Cleaner Manual © - All Rights Reserved 2025