Shark WANDVAC WV201CO Vacuum Cleaner Manual

The Shark WANDVAC WV201CO is a cordless, lightweight stick vacuum cleaner designed for quick cleanups and above-floor cleaning. It features a powerful motor, LED headlights, a crevice tool, a dusting brush, a washable filter, and a wall-mounted docking station for charging and storage. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Parts 6. Operating Instructions 7. Maintenance & Cleaning 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle, Handheld vacuum body, Crevice tool, Dusting brush, Wall dock, Charger, Washable filter, LED headlights.

Feature	Description
Power Button	Turns vacuum on/off; press and hold for continuous use
LED Headlights	Illuminates dark areas under furniture
Crevice Tool	For tight spaces, corners, and edges
Dusting Brush	For delicate surfaces like blinds, keyboards, and shelves
Washable Filter	Captures fine dust; can be rinsed and reused
Wall Dock	For charging and storing the vacuum
Battery Indicator	LED lights show remaining battery charge
Empty Dirt Cup	Button releases cup for easy debris disposal
Charging Port	For connecting charger to vacuum or dock
Motorized Brushroll	Spins to deep clean carpets and hard floors

Assembly & Installation

Unpack and inspect all contents. Assemble before first use.

Attach floor nozzle: Align nozzle with vacuum body and push until it clicks.
Install wall dock: Use included screws to mount dock on wall near outlet.
Attach tools: Crevice tool and dusting brush store on dock or vacuum.
Charge battery: Place vacuum on dock or plug charger directly into vacuum.

WARNING! Ensure dock is securely mounted to prevent falling. Keep charger away from water.

First-Time Setup

Fully charge vacuum before first use.

Charge: Place vacuum on dock; LED indicator will glow red, then turn off when fully charged.
Install filter: Remove dirt cup, insert washable filter, and reattach cup.
Attach tool: For above-floor cleaning, attach crevice tool or dusting brush directly to vacuum body.
Power on: Press and hold power button to begin vacuuming.

CAUTION! Do not use vacuum without filter installed. Ensure battery is fully charged for optimal performance.

Specifications

Model: Shark WANDVAC WV201CO.
Type: Cordless stick vacuum.
Battery: Rechargeable lithium-ion.
Run Time: Up to 20 minutes on standard mode.
Charging Time: Approximately 3.5 hours.
Dirt Cup Capacity: 0.15 dry quarts.
Weight: 2.5 lbs.
Noise Level: Low-decibel operation.
Accessories: Crevice tool, dusting brush, wall dock, charger.
Power Source: 120V AC, 60Hz charging adapter.

Controls and Parts

Main vacuum body: Power button, Battery indicator LEDs, Dirt cup release button, Charging port. Floor nozzle: Motorized brushroll, LED headlights. Handheld mode: Detach vacuum body from nozzle for portable cleaning.

Wall Dock: Holds vacuum and tools; charges when vacuum is placed on dock.

Operation: Press and hold power button to run; release to stop. Battery indicator: Green (high charge), Yellow (medium), Red (low). Empty dirt cup: Press release button, remove cup, and empty debris into trash.

Operating Instructions

For floors: Use with floor nozzle attached. For above-floor: Use as handheld with tool attached.

Turn on: Press and hold power button.
Vacuum floors: Push nozzle forward and back over surface.
Switch to handheld: Press release button to detach vacuum body from nozzle.
Use tools: Attach crevice tool for edges; dusting brush for surfaces.
Turn off: Release power button.
Empty dirt cup: Press release button, empty debris, reattach cup.

Tip: For best results, empty dirt cup after each use and clean filter regularly.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dirt cup: After each use; press release button to remove cup.
Clean filter: Remove filter every month; rinse under water, air dry 24 hours.
Clear brushroll: Remove debris wrapped around brushroll; use scissors if needed.
Check for blockages: Inspect nozzle, hose, and tools for clogs.
Wipe exterior: Use dry cloth to clean vacuum body and tools.

WARNING! Do not use vacuum without dry filter. Unplug charger before cleaning.

Battery & Charging

Use only included charger and dock.

Charging: Place vacuum on dock or plug charger into vacuum port.
Indicator: Red LED means charging; off means fully charged.
Run time: Up to 20 minutes; less if using high-power mode.
Battery care: Store in cool, dry place; avoid extreme temperatures.
Replacement: Contact Shark for battery replacement if run time shortens significantly.

CAUTION! Do not modify charger or use damaged battery. Charge only with provided adapter.

Care & Storage

Store vacuum on wall dock when not in use.

CAUTION! Do not store vacuum with wet filter. Keep away from heat sources and direct sunlight.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery dead/not charged	Charge vacuum fully; ensure dock is plugged in.
Weak suction	Full dirt cup/clogged filter	Empty dirt cup; clean filter; check for blockages.
Brushroll not spinning	Debris wrapped around roll	Turn off vacuum; clear debris from brushroll.
Battery not charging	Loose connection	Ensure vacuum is properly seated on dock; check outlet.
Vacuum turns off during use	Overheating/battery low	Let vacuum cool for 45 minutes; recharge battery.

Reset: Turn off vacuum, remove battery for 10 seconds, reinsert, and charge.

Service: 1-800-798-7398; sharkclean.com