Shark WANDVAC WV201BLBRN Vacuum Cleaner Manual

The Shark WANDVAC WV201BLBRN is a lightweight, cordless stick vacuum designed for quick cleanups. It features a powerful motor, a removable battery, a washable filter, a crevice tool, a dusting brush, and a wall-mounted charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Removable battery, Charging dock, Crevice tool, Dusting brush, Washable filter.

FeatureDescription
Power ButtonTurns vacuum on/off; press and hold for continuous use
Battery Release ButtonReleases battery for charging or replacement
Dust Cup Release ButtonOpens dust cup for emptying
Filter AccessRemovable filter for cleaning
Attachment DockStorage for crevice tool and dusting brush on charging dock
Charging ContactsConnects to dock for battery charging
LED Battery IndicatorShows battery level (green/red)
Suction ControlAdjusts suction power (if applicable)
Crevice ToolFor tight spaces and edges
Dusting BrushFor delicate surfaces and dusting

Assembly & Installation

Unpack and inspect all contents. Assemble before first use.

  1. Install battery: Align battery with slot on vacuum, press until it clicks.
  2. Mount charging dock: Use screws (included) to mount dock on wall near outlet.
  3. Attach tools: Place crevice tool and dusting brush in dock slots.
  4. Charge vacuum: Place vacuum on dock; ensure charging indicator lights.

WARNING! Ensure dock is securely mounted to prevent falling. Keep away from water.

First-Time Setup

Fully charge battery before first use.

  1. Charge: Place vacuum on dock; charge until indicator is solid green (approx. 3 hours).
  2. Install filter: Ensure filter is properly seated in dust cup.
  3. Test vacuum: Press power button to ensure motor runs.
  4. Empty dust cup: Press release button, empty contents into trash.

CAUTION! Do not use without filter installed. Keep hair and loose clothing away from suction inlet.

Specifications

Controls and Settings

Power Button: Press to turn on; press again to turn off. For continuous cleaning, press and hold.

LED Indicators: Green = charged/charging; Red = low battery; Flashing red = charging error.

Battery Release: Press button to remove battery for charging separately. Dust Cup Release: Press button to open and empty. Suction Control: If model includes, switch between standard and boost modes.

Using Attachments

Attach tools directly to vacuum nozzle.

  1. Turn off vacuum before changing attachments.
  2. Crevice tool: Insert into nozzle for corners, edges, and tight spaces.
  3. Dusting brush: Attach for dusting blinds, shelves, and delicate surfaces.
  4. To remove: Pull attachment straight off nozzle.

Tip: Clear attachment of debris after each use to maintain suction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use: Press release, empty, close securely.
  2. Clean filter monthly: Remove filter, rinse under cold water, air dry 24 hours.
  3. Check for blockages: Inspect nozzle, hose, and attachments for clogs.
  4. Wipe exterior: Use dry cloth to clean vacuum body and dock.

WARNING! Do not use vacuum without dry filter. Do not immerse in water.

Battery & Charging

Battery is removable for convenience.

  1. Charging: Place vacuum on dock or remove battery to charge separately.
  2. Indicator: Solid green = fully charged; Red = charging; Flashing = error.
  3. Run time: Up to 20 minutes; decreases over time with battery age.
  4. Battery replacement: Contact Shark for genuine replacement batteries.

CAUTION! Use only Shark-approved charger and battery. Do not expose to extreme temperatures.

Care & Storage

Store in dry place. Keep dock mounted when not in use.

CAUTION! Do not store with wet filter. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery dead/not installedCharge battery; ensure properly seated.
Reduced suctionFull dust cup/clogged filterEmpty dust cup; clean filter; check for blockages.
Battery not chargingDirty contacts/dock issueClean charging contacts; ensure dock plugged in.
Vacuum turns off during useOverheating/battery lowAllow to cool; recharge battery.
Attachments not fittingDebris in nozzleClear nozzle; ensure attachment is aligned.

Reset: Remove battery for 30 seconds, then reinstall.

Service: 1-800-798-7398; sharkclean.com

Shark WANDVAC WV201BLBRN Vacuum Cleaner Manual © - All Rights Reserved 2025