Shark Wandvac WV200 Vacuum Cleaner Manual

The Shark Wandvac WV200 is a lightweight, cordless, handheld vacuum cleaner designed for quick cleanups and hard-to-reach areas. It features a powerful motor, washable dust cup, crevice tool, multi-surface brush, USB-C charging, and a wall-mountable dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Parts 6. Operating Instructions 7. Cleaning & Maintenance 8. Charging & Battery 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Washable Dust Cup, Crevice Tool, Multi-Surface Brush Tool, Wall Mount Dock, USB-C Charging Cable.

Feature	Description
Power Button	Turns vacuum on/off; press and hold for max power mode
Washable Dust Cup	Easy-empty container; detaches for cleaning
Crevice Tool	For tight spaces, edges, and corners
Multi-Surface Brush	For floors, upholstery, and delicate surfaces
Wall Mount Dock	For convenient storage and charging
USB-C Charging Port	For fast charging via included cable
LED Battery Indicator	Shows remaining battery charge level
Filter System	Washable foam and felt filter for fine dust
Lightweight Design	Easy to carry and use above floor level
Cordless Operation	Rechargeable lithium-ion battery

Assembly & Installation

Unpack and inspect all contents. Assemble tools as needed.

Attach tool: Align crevice tool or brush tool with vacuum nozzle and push until it clicks.
Install wall mount: Choose a dry location near an outlet. Use included screws to secure dock to wall.
Place vacuum on dock: Ensure charging contacts align.
Charge fully before first use.

WARNING! Keep charger and vacuum away from water. Do not mount dock in wet areas.

First-Time Setup

Charge the vacuum completely before initial operation.

Charge: Connect USB-C cable to vacuum and power adapter. LED will pulse during charging.
Install filter: Ensure foam and felt filters are correctly placed inside dust cup.
Test power: Press power button to ensure unit turns on.
Select tool: Attach appropriate tool for your cleaning task.

CAUTION! Do not use without filters installed. Ensure dust cup is securely attached.

Specifications

Model: Shark Wandvac WV200.
Type: Cordless Handheld Vacuum.
Power Source: Rechargeable Lithium-Ion Battery.
Charging Time: Approx. 3.5 hours for full charge.
Run Time: Up to 20 minutes (standard mode).
Dust Cup Capacity: 0.15 dry quarts.
Weight: 1.5 lbs.
Included Accessories: Crevice Tool, Multi-Surface Brush, Wall Mount, USB-C Cable.
Warranty: 1-year limited warranty.

Controls and Parts

Main unit features: Power Button, Dust Cup Release Button, LED Battery Indicator, Charging Contacts.

Operation: Press Power Button to start; press again to stop. Press and hold for Max Power mode (reduced run time).

Maintenance: Empty dust cup after each use. Wash filters monthly. Check for blockages if suction decreases.

Operating Instructions

For best results, use appropriate tool for surface.

Turn on: Press Power Button.
Select mode: Standard for normal cleaning; press and hold for Max Power for stubborn debris.
Clean surfaces: Use brush tool for floors and upholstery; use crevice tool for edges and corners.
Empty dust cup: Press release button, remove cup, and empty contents into trash.
Turn off: Press Power Button.

Tip: Work in well-lit areas. Clear large objects before vacuuming.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Wash filters monthly: Rinse foam and felt filters under cold water; air dry completely for 24 hours before reinstalling.
Check for blockages: Remove tool and inspect nozzle and hose for obstructions.
Wipe exterior: Use dry cloth to clean vacuum body.

WARNING! Do not use vacuum without dry filters. Do not immerse main unit in water.

Charging & Battery

Charge using included USB-C cable and power adapter.

Plug USB-C cable into charging port on vacuum.
Connect other end to power adapter and plug into outlet.
LED indicator will pulse red during charging; solid blue when fully charged.
For dock charging: Place vacuum on mounted dock; ensure contacts connect.

Note: Battery run time decreases over time. Store in a cool, dry place.

Care & Storage

Store vacuum on wall dock or in a dry location. Keep tools in a clean, accessible place.

CAUTION! Do not store near heat sources. Keep battery away from metal objects.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted	Charge fully for 3.5 hours. Ensure charger is connected properly.
Weak suction	Full dust cup, clog, or wet filter	Empty dust cup. Check for blockages in nozzle/tool. Ensure filters are completely dry.
Battery not charging	Faulty connection or charger issue	Check USB-C cable and power adapter. Try different outlet. Ensure contacts on dock are clean.
Vacuum turns off during use	Overheating or battery protection	Allow unit to cool for 15 minutes. Charge battery fully.
Dust cup won't attach	Misaligned or obstructed	Ensure cup is aligned correctly and filters are properly seated.

Reset: Turn off, remove battery (if accessible), wait 30 seconds, reinstall.

Service: 1-800-798-7398; sharkclean.com