Shark WANDVAC WV200 Series Vacuum Cleaner Manual

The Shark WANDVAC WV200 Series is a lightweight, cordless stick vacuum designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, removable battery, LED headlights, a crevice tool, and a multi-surface brush roll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using the Vacuum 7. Cleaning & Maintenance 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight wand, Motorized floor nozzle, Removable battery, Charging dock, Crevice tool, LED headlights, Washable dust cup.

FeatureDescription
Powerful SuctionHigh-efficiency motor for strong pickup on various surfaces
Cordless DesignRechargeable lithium-ion battery for freedom of movement
LED HeadlightsIlluminates hidden debris under furniture and in dark corners
Multi-Surface Brush RollAdjusts automatically for carpets and hard floors
Washable Dust CupEasy to empty and clean; no bags required
2-in-1 Crevice ToolIntegrated tool for tight spaces and upholstery
Lightweight WandEasy to carry and maneuver for above-floor cleaning
Wall-Mount DockFor convenient charging and storage
Battery IndicatorLED lights show remaining battery life
One-Touch EmptyButton releases dirt directly into trash

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

  1. Attach the wand: Insert the wand into the floor nozzle until it clicks securely.
  2. Install the battery: Slide the battery into the vacuum body until it locks.
  3. Mount the charging dock: Use included screws to mount dock on wall near outlet.
  4. Charge the vacuum: Place vacuum on dock; charge fully before first use (approx. 3.5 hours).

WARNING! Ensure all parts are securely connected. Do not force connections.

First-Time Use

Fully charge battery, then power on.

  1. Power on: Press the power button on the handle.
  2. Select mode: Use mode button to switch between standard and max suction.
  3. Begin cleaning: Glide nozzle over floors; use wand for above-floor areas.
  4. Empty dust cup: Press release button over trash can when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Controls and Parts

Main Controls: Power button, Mode button (Standard/Max), Battery indicator LEDs.

Parts Diagram: Handle with controls, Wand, Motorized floor nozzle, Battery pack, Dust cup with release, Charging contacts, LED headlights, Brush roll, Crevice tool storage.

Operation: Press power to start; press again to stop. Mode button toggles suction power. Battery LEDs show charge level (3=full, 1=low).

Using the Vacuum

For floors: Use motorized nozzle. For above-floor: Detach wand.

  1. Turn on vacuum and select mode.
  2. For floors: Glide nozzle forward and back; avoid pulling debris.
  3. For carpets: Use slow, overlapping passes.
  4. For hard floors: Ensure brush roll is engaged (auto-adjusts).
  5. For edges: Use side of nozzle.
  6. For furniture/upholstery: Attach crevice tool to wand.
  7. For ceilings/corners: Use extended wand with crevice tool.

Tip: Empty dust cup when it reaches MAX line for optimal performance.

Cleaning & Maintenance

Regular maintenance ensures peak performance.

  1. Empty dust cup after each use: Press release button over trash.
  2. Clean filters monthly: Rinse foam and felt filters under water; air dry 24 hours.
  3. Clear brush roll weekly: Remove debris wrapped around roll; check for blockages.
  4. Inspect nozzle and wand: Remove any obstructions.
  5. Wipe exterior: Use dry cloth.

WARNING! Do not use vacuum without filters. Ensure all parts are completely dry before reassembly.

Battery & Charging

Use only Shark-approved battery and charger.

  1. Charging: Place vacuum on dock; LED will pulse during charge, stay solid when full.
  2. Battery life: Run time varies by mode and surface. Use standard mode for longer cleans.
  3. Battery replacement: Contact Shark Customer Service for genuine replacement battery.
  4. Storage: Store vacuum on dock to maintain charge. For long storage, remove battery.

CAUTION! Do not expose battery to fire, water, or extreme temperatures. Do not attempt to disassemble.

Care & Storage

Store in a cool, dry place. Keep away from heat sources.

CAUTION! Do not store with a wet dust cup or filters. Always turn off and remove from dock before cleaning or maintenance.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © SharkNinja Operating LLC. Shark, WANDVAC, and associated designs are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery dead/not installedCharge battery; ensure it's fully inserted and locked.
Loss of suctionFull dust cup/clogged filterEmpty dust cup; clean filters; check for blockages in nozzle and wand.
Brush roll not spinningDebris tangled/obstructionTurn off, unplug, and clear brush roll of hair and debris.
Battery not chargingDirty contacts/dock issueClean charging contacts on vacuum and dock; ensure dock is plugged in.
Vacuum turns off during useOverheating/battery protectionAllow to cool for 45 minutes; check filters for clogs.
LED headlights not workingBattery low/connectionRecharge battery; ensure wand is fully connected.

Reset: Remove battery for 60 seconds, then reinstall.

Service: 1-800-798-7398; sharkclean.com

Shark WANDVAC WV200 Series Vacuum Cleaner Manual © - All Rights Reserved 2025