Shark WANDVAC WS642AE Vacuum Cleaner Manual

The Shark WANDVAC WS642AE is a powerful, lightweight cordless stick vacuum designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a high-efficiency motor, LED headlights, a washable filter, a crevice tool, and a charging dock. This manual covers safety instructions, assembly, operation, maintenance, troubleshooting, and specifications to ensure optimal performance and longevity of your vacuum.

1. Important Safety Instructions 2. Parts & Assembly 3. Charging the Vacuum 4. Specifications 5. Controls and Indicators 6. Using Your WANDVAC 7. Emptying the Dust Cup 9. Cleaning & Maintenance 10. Regulatory Information 11. Troubleshooting

Important Safety Instructions

Read all instructions before using your Shark WANDVAC. Basic safety precautions reduce the risk of fire, electric shock, and injury.

Precaution	Description
Power Source	Use only the provided charger and charging dock. Do not modify the plug.
Water & Liquids	Do not use outdoors or on wet surfaces. Do not immerse in water.
Blockages	Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Attachments	Use only Shark® branded attachments and accessories.
Charging	Charge only with the provided charger. Unplug charger when not in use.
Heat & Flammables	Do not use near heated surfaces or to pick up flammable or combustible liquids.
Storage	Store indoors in a dry place. Do not store with a fully charged battery for extended periods.
Battery Care	Do not incinerate or short-circuit the battery. The battery must be recycled or disposed of properly.

Parts & Assembly

Your WANDVAC comes ready to use with minimal assembly required.

Main Body: Contains motor, battery, dust cup, and controls.
Floor Nozzle: Attaches to main body for floor cleaning. Ensure it clicks into place.
Crevice Tool: For tight spaces like between cushions or along edges. Attaches to the end of the main body or nozzle.
Charging Dock: Wall-mountable dock for storing and charging the vacuum.

Assembly: Align the floor nozzle with the main body and push until you hear a click. To attach the crevice tool, insert it into the opening at the end of the vacuum or nozzle.

WARNING! Ensure the vacuum is powered OFF before assembly or disassembly.

Charging the Vacuum

For first use, charge the vacuum fully for approximately 3.5 hours.

Using the Dock: Place the vacuum onto the charging dock, ensuring the metal charging contacts align.
Direct Charging: Alternatively, plug the charger directly into the port on the back of the vacuum.
Indicator Light: The battery indicator will illuminate during charging. A solid light indicates full charge.

Battery Life: Provides up to 30 minutes of runtime on a full charge (varies with power mode and usage).

CAUTION! Do not leave the vacuum charging continuously for more than 72 hours. Use only the provided charger.

Specifications

Model: WANDVAC WS642AE
Type: Cordless Stick Vacuum
Power Source: Rechargeable Lithium-Ion Battery
Charging Time: ~3.5 hours
Run Time: Up to 30 minutes (Eco Mode)
Dust Cup Capacity: 0.15 dry quarts
Filtration: Washable Fine Dust Filter & Felt Filter
Attachments: Crevice Tool, Charging Dock
Weight: Approximately 2.5 lbs
LED Headlights: Yes, on floor nozzle

Controls and Indicators

Power Button: Located on the handle. Press once to turn on in default Eco Mode. Press again to switch to Max Mode for increased suction. Press a third time to turn off.

Battery Indicator Lights: Located near the power button.
- Solid Blue: Battery charge is above 25%.
- Flashing Blue: Battery charge is between 10-25%.
- Solid Red: Battery is charging.
- Flashing Red: Low battery (below 10%) or charging error.

Release Buttons:
- Dust Cup Release: Press to detach the dust cup for emptying.
- Nozzle Release: Press to detach the floor nozzle.

Using Your WANDVAC

Power On: Press the Power Button. Start in Eco Mode for balanced cleaning and battery life.
Floors: Glide the floor nozzle back and forth. LED lights illuminate debris.
Above-Floor Cleaning: Detach the floor nozzle to use the main body as a handheld vacuum for furniture, stairs, or with the crevice tool.
Crevice Tool: Attach for cleaning along edges, in corners, between car seats, or in other tight spaces.
Power Mode: Press the Power Button while running to switch to Max Mode for concentrated suction on heavy dirt. This reduces run time.
Automatic Shut-off: The vacuum will turn off if the battery is depleted or if a blockage causes the motor to overheat.

Tip: Make slow, overlapping passes for best results on carpets. Empty the dust cup when it reaches the MAX fill line.

Emptying the Dust Cup

Empty the dust cup after each use or when it reaches the MAX line to maintain suction.

Turn off and unplug the vacuum from the charger.
Hold the vacuum over a trash can.
Press the Dust Cup Release button and pull the cup away from the main body.
Open the bottom lid of the dust cup to release debris. Tap gently if needed.
Close the lid securely and reattach the dust cup to the main body until it clicks.

WARNING! Do not use the vacuum if the dust cup is not properly attached.

Cleaning & Maintenance

Regular maintenance ensures peak performance.

Washable Filters:
1. Remove the dust cup.
2. Take out the Fine Dust Filter and the Felt Filter from the top of the dust cup assembly.
3. Rinse filters under lukewarm water until water runs clear. Do not use soap.
4. Air dry filters COMPLETELY for at least 24 hours before reinstalling.
Frequency: Clean filters every month under normal use, or more often if you vacuum fine dust.

Cleaning the Dust Cup & Nozzle: Wipe with a dry cloth. Use a dry brush to remove hair or fibers from the brush roll in the floor nozzle. Do not wash the main body, motor, or battery components.

CAUTION! NEVER operate the vacuum without both filters installed and completely dry.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This product contains a lithium-ion battery. Battery must be recycled or disposed of separately from household waste. Contact your local waste disposal authority for proper recycling/disposal instructions. For support, visit sharkclean.com or call 1-888-228-5535.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted; Not properly docked	Charge the vacuum fully. Ensure it is correctly seated on the charging dock.
Reduced suction or run time	Full dust cup; Clogged filter; Blockage	Empty dust cup. Clean filters (ensure they are dry). Check hose, nozzle, and openings for blockages.
Battery not charging (flashing red light)	Faulty connection; Temperature extreme	Ensure contacts are clean and vacuum is properly docked. Charge at room temperature (40°F - 104°F).
Brush roll not spinning	Tangled hair/debris; Obstruction	Turn off vacuum. Clear hair and debris from the brush roll. Ensure nothing is wrapped around it.
Vacuum turns off during use	Battery depleted; Overheating due to blockage	Recharge battery. Turn off, let cool for 45 minutes, and check for blockages in the air path.
Unusual noise or odor	Foreign object in motor path; Blockage	Turn off immediately. Check dust cup, filters, nozzle, and hose for obstructions.

Reset: If the vacuum behaves erratically, remove it from the charger, hold the power button for 10 seconds, then place it back on the charger.

Service: For issues not resolved here, contact Shark Customer Service at 1-888-228-5535 or sharkclean.com.