Shark WANDVAC WS633 Vacuum Cleaner Manual

The Shark WANDVAC WS633 is a lightweight, cordless stick vacuum cleaner designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, removable battery, washable filter, LED headlights, and multiple attachments for various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lightweight wand, Motorized floor nozzle, Removable battery, Charging dock, Crevice tool, Dusting brush, Washable filter, LED headlights.

Assembly & Setup

Unpack and inspect contents. Assemble before first use.

1. Attach wand to floor nozzle: Align arrows and click into place.
2. Insert battery: Slide battery into handle until it clicks.
3. Charge battery: Place vacuum on charging dock; plug into outlet.
4. Attach accessories: Click crevice tool or dusting brush onto wand end.

WARNING! Ensure vacuum is turned off during assembly. Keep fingers away from moving parts.

First-Time Use

Fully charge battery before initial use; follow on-dock indicator.

1. Power on: Press POWER button on handle.
2. Select mode: Use wand for floors; detach for handheld cleaning.
3. Clean floors: Push forward and back on carpets; use hard floor setting.
4. Empty dust cup: Press release button; empty contents into trash.

CAUTION! Do not use on wet surfaces. Keep hair and loose clothing away from brush roll.

Specifications

• Model: Shark WANDVAC WS633.
• Power Source: Rechargeable lithium-ion battery.
• Runtime: Up to 30 minutes (varies by surface).
• Charging Time: Approximately 3.5 hours.
• Dust Cup Capacity: 0.5 liters.
• Weight: 3.5 lbs (without attachments).
• Noise Level: ≤75 dB.
• Attachments: Crevice tool, dusting brush, charging dock.
• Warranty: 1-year limited warranty.

Controls and Settings

Handle controls: POWER button, Battery indicator LEDs, Wand release button.

Floor Nozzle: Auto-adjusts between carpets and hard floors; LED headlights activate automatically.

Battery: Remove by pressing release button on battery pack. Charging: Indicator flashes red while charging, solid blue when fully charged. Maintenance: Filter access button on dust cup; brush roll removal for cleaning.

Attachments & Accessories

Crevice tool: For edges, corners, and between cushions. Dusting brush: For shelves, blinds, and delicate surfaces.

1. Turn off vacuum before changing attachments.
2. Align attachment with wand end; click into place.
3. For handheld use: Press wand release button; detach wand.

Tip: Store attachments on charging dock or in provided storage bag.

Cleaning Modes

Supports floor cleaning, above-floor cleaning, and handheld cleaning.

1. Floor cleaning: Use with motorized floor nozzle; auto-adjusts to surface.
2. Above-floor cleaning: Attach crevice tool or dusting brush to wand.
3. Handheld cleaning: Detach wand; use with attachments for tight spaces.
4. Empty dust cup: Press release button; empty after each use.
5. Clean filter: Remove and wash every 3 months or as needed.
6. Check brush roll: Remove debris wrapped around brush roll regularly.

WARNING! Do not vacuum large objects, liquids, or hot ashes. Unplug charger when not in use.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Wash filter every 3 months: Rinse under cold water; air dry 24 hours.
3. Clean brush roll: Remove hair and debris with scissors or cleaning tool.
4. Check battery contacts: Keep clean and dry.
5. Store on charging dock in a dry place.

CAUTION! Do not use damaged battery or charger. Use only Shark-approved parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly.

Troubleshooting

Reset: Remove and reinsert battery if vacuum becomes unresponsive.

Service: 1-800-798-7398; www.sharkclean.com