Shark WANDVAC WS632RGBRN Vacuum Cleaner Manual

The Shark WANDVAC WS632RGBRN is a powerful, cordless, lightweight stick vacuum cleaner designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a rechargeable lithium-ion battery, a motorized brush roll for carpets and hard floors, a large-capacity dust cup with one-touch emptying, LED headlights, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Cleaning Modes & Attachments 7. Emptying & Cleaning the Dust Cup 8. Battery & Charging 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Motorized floor nozzle, Charging dock, Wall mount, Crevice tool, Dusting brush, Upholstery tool.

Feature	Description
Power Button	Turns vacuum on/off; press to cycle through power modes (Eco, Normal, Max)
LED Battery Indicator	Shows remaining battery charge level
Motorized Brush Roll	Automatically adjusts between carpets and hard floors; LED headlights illuminate debris
One-Touch Dust Cup Empty	Press button to release bottom lid and empty collected debris directly into trash
Washable Filter	Foam and felt filters are reusable; clean regularly for optimal performance
Charging Dock	Provides a convenient storage and charging station; can be mounted on wall
Attachments	Crevice tool, dusting brush, and upholstery tool store on charging dock
Battery	Rechargeable lithium-ion; provides up to 30 minutes of runtime (varies by mode)
Wand Release Button	Allows quick detachment of wand for handheld use or attachment changes
Anti-Allergen Complete Seal	Technology traps dust and allergens inside the dust cup

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Insert the wand into the main vacuum body until it clicks securely.
Attach the motorized floor nozzle to the end of the wand until it clicks.
Place the charging dock on a flat surface or mount it to the wall using provided screws and anchors.
Plug the power adapter into the charging dock and into a standard 120V AC outlet.
Place the vacuum onto the charging dock, ensuring the charging contacts align.

WARNING! Ensure the vacuum is turned off and not running during assembly or when attaching/detaching parts.

First-Time Use

Fully charge the vacuum before first use.

Place vacuum on charging dock. The battery indicator will light up to show charging status.
Charge until all LED indicators are solid (approximately 3.5 hours for full charge).
Press the power button to turn on. Press again to cycle through Eco (low power), Normal, and Max (high power) suction modes.
Begin cleaning floors with the motorized nozzle attached. For above-floor cleaning, press the wand release button and attach desired tool.

CAUTION! Do not use to pick up liquids, wet debris, or hazardous materials. Do not use on wet surfaces.

Specifications

Model: Shark WANDVAC WS632RGBRN
Type: Cordless Stick Vacuum
Power Source: Rechargeable Lithium-Ion Battery
Charge Time: Approx. 3.5 hours
Runtime: Up to 30 minutes (Eco mode), varies with suction setting and use
Dust Cup Capacity: 0.15 dry quarts
Filtration: Washable Foam and Felt Filter with Anti-Allergen Complete Seal

Attachments: Motorized Floor Nozzle, Crevice Tool, Dusting Brush, Upholstery Tool

Weight: Approx. 3.5 lbs

Input: 120V AC, 60Hz

Controls and Indicators

Main controls are located on the vacuum body.

Power Button: Single press to turn on (starts in last used mode). Press again to cycle modes: Eco (1 LED), Normal (2 LEDs), Max (3 LEDs). Press and hold for 2 seconds to turn off.

LED Battery Indicator: Shows charge status. 3 solid LEDs = 70-100% charge. 2 LEDs = 30-70%. 1 LED = 10-30%. 1 flashing LED = less than 10%, charge soon. Flashing red = critical battery, vacuum will shut down.

Wand Release Button: Press to detach wand for handheld cleaning or to switch attachments.

Brush Roll On/Off Button (on nozzle): Turns the motorized brush roll on for carpets or off for delicate hard floors or area rugs.

Cleaning Modes & Attachments

Use the right tool for each cleaning task.

Floor Cleaning: Use with motorized floor nozzle attached. The brush roll automatically adjusts suction. Use brush roll ON for carpets, OFF for hard floors.

Handheld Cleaning: Press wand release button to detach wand. Attach crevice tool, dusting brush, or upholstery tool directly to the vacuum body.

Crevice Tool: For tight spaces like between cushions, along baseboards, and in car interiors.

Dusting Brush: For gentle dusting of shelves, blinds, lampshades, and electronics.

Upholstery Tool: For cleaning sofas, chairs, stairs, and pet beds.

Tip: Clear large debris before vacuuming to prevent clogs. Regularly check the brush roll for hair or string wraps.

Emptying & Cleaning the Dust Cup

Empty the dust cup after every use or when the full line is reached.

Turn off and remove vacuum from charger.

Hold the vacuum over a trash can.

Press the dust cup release button on the back of the vacuum. The bottom lid will open, emptying contents.

Tap the dust cup gently to dislodge any stuck debris. Close the lid until it clicks.

To clean the filter, remove the dust cup by pressing the cup release latch. Remove the foam and felt filters. Rinse with cold water only. Let air dry completely for at least 24 hours before reassembling.

WARNING! Do not use the vacuum without the filters installed and completely dry. Do not wash any electrical parts.

Battery & Charging

For best battery life, store vacuum on the charging dock when not in use.

Charge fully before first use.

The vacuum can be left on the charger indefinitely without overcharging.

If storing for an extended period, charge fully, then store in a cool, dry place away from metal objects.

Battery runtime decreases over time. Replacement batteries are available from Shark.

Use only the Shark-approved charger provided with the vacuum.

CAUTION! Do not attempt to disassemble or replace the battery. Contact Shark Customer Service for battery issues.

Care & Maintenance

Regular maintenance ensures peak performance.

Clean Brush Roll Weekly: Use scissors to cut away hair, strings, or fibers wrapped around the brush roll. Remove the brush roll by pressing the latches on the nozzle for a thorough clean.

Wash Filters Monthly: Rinse foam and felt filters under cold water until water runs clear. Air dry completely for 24 hours.

Check for Clogs: If suction is weak, check the dust cup, wand, hose, and nozzle openings for blockages.

Clean Exterior: Wipe with a dry or slightly damp cloth. Do not immerse in water or use abrasive cleaners.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, WANDVAC, and Anti-Allergen Complete Seal are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Battery depleted, not docked properly Place on charger for at least 10 minutes. Ensure charging contacts are clean and aligned.

Weak suction or no suction Full dust cup, clog, dirty filter Empty dust cup. Check for clogs in nozzle, wand, and vacuum inlet. Clean or replace filters.

Brush roll not spinning Hair/debris wrap, brush roll off Turn brush roll ON via button on nozzle. Clean hair/debris from brush roll. Ensure nozzle is attached correctly.

Battery not charging Faulty outlet, dirty contacts, adapter issue Try a different outlet. Clean charging contacts on vacuum and dock with dry cloth. Ensure power adapter is plugged in securely.

Vacuum turns off during use Overheating, battery protection Allow vacuum to cool for 45-60 minutes. Check and clean filters to restore airflow.

LED indicators flashing red Battery error, blockage Turn off, check for severe clogs. Remove from charger and wait 2 minutes, then place back on charger. If problem persists, contact support.

Reset: For electronic issues, remove vacuum from charger, hold power button for 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com

Shark WANDVAC WS632RGBRN Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted, not docked properly	Place on charger for at least 10 minutes. Ensure charging contacts are clean and aligned.
Weak suction or no suction	Full dust cup, clog, dirty filter	Empty dust cup. Check for clogs in nozzle, wand, and vacuum inlet. Clean or replace filters.
Brush roll not spinning	Hair/debris wrap, brush roll off	Turn brush roll ON via button on nozzle. Clean hair/debris from brush roll. Ensure nozzle is attached correctly.
Battery not charging	Faulty outlet, dirty contacts, adapter issue	Try a different outlet. Clean charging contacts on vacuum and dock with dry cloth. Ensure power adapter is plugged in securely.
Vacuum turns off during use	Overheating, battery protection	Allow vacuum to cool for 45-60 minutes. Check and clean filters to restore airflow.
LED indicators flashing red	Battery error, blockage	Turn off, check for severe clogs. Remove from charger and wait 2 minutes, then place back on charger. If problem persists, contact support.