Shark WANDVAC WS632PKBRN Vacuum Cleaner Manual

The Shark WANDVAC WS632PKBRN is a cordless, lightweight stick vacuum designed for quick cleanups on hard floors and carpets. It features a powerful motor, a removable handheld pod, a washable dust cup, a crevice tool, a multi-surface brushroll, LED headlights, and a wall-mount charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, Handheld pod, Charging dock, Crevice tool, Multi-surface brushroll, Washable dust cup, LED headlights.

Assembly & Installation

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert the handle into the main body until it clicks securely.
2. Install brushroll: Ensure brushroll is properly seated in the floor nozzle.
3. Mount charging dock: Use included screws to mount dock on wall near outlet.
4. Charge vacuum: Place vacuum on dock; charge fully before first use (approx. 4 hours).

WARNING! Ensure vacuum is powered off during assembly. Keep hands clear of moving parts.

First-Time Use

Fully charge the vacuum before initial operation.

1. Power on: Press power button once for standard cleaning mode.
2. Select surface: For carpets, ensure brushroll is engaged; for hard floors, it retracts automatically.
3. Empty dust cup: Press release button to remove and empty cup after each use.
4. Use attachments: Detach handheld pod for upholstery, stairs, or using crevice tool.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Avoid hair wrap around brushroll.

Specifications

• Model: Shark WANDVAC WS632PKBRN.
• Type: Cordless stick vacuum with handheld option.
• Battery: Rechargeable lithium-ion.
• Run Time: Up to 30 minutes in standard mode; 10 minutes in boost mode.
• Charge Time: Approximately 4 hours for full charge.
• Dust Cup Capacity: 0.5 dry quarts.
• Attachments: Crevice tool, multi-surface brushroll.
• Filters: Washable pre-motor and post-motor filters.
• Weight: Under 5 lbs.
• Power Source: 120V AC charging dock.

Controls and Indicators

Main controls located on handle. Indicators on battery housing.

Power Button: Single press for ON (standard mode); double-press for Boost mode; press again to turn OFF.

Battery LED Indicators: 3 LEDs show charge level (Green: High, Amber: Medium, Red: Low/Charging).

Brushroll Switch: Automatic adjustment based on surface; manual check for debris if needed.

Dust Cup Release: Button on back of pod to detach cup for emptying.

Handheld Release: Button on main body to detach pod for above-floor cleaning.

Using Attachments

Attachments enhance cleaning versatility.

1. Detach handheld pod: Press release button on main body.
2. Attach crevice tool: Insert into nozzle of handheld pod until it clicks.
3. Use for edges: Ideal for baseboards, window sills, and tight spaces.
4. Reattach pod: Align and click back into main body for floor cleaning.

Tip: Ensure attachments are securely clicked into place to prevent loss of suction.

Cleaning Modes & Surfaces

Two cleaning modes for different needs.

1. Standard Mode: For everyday cleaning; press power button once.
2. Boost Mode: For concentrated cleaning on high-traffic areas; double-press power button.
3. Carpets: Brushroll automatically engages; use forward/back motion.
4. Hard Floors: Brushroll retracts; use smooth strokes.
5. Above-Floor: Detach handheld pod for furniture, stairs, ceilings.
6. LED Headlights: Automatically illuminate in low-light areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming cords or sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dust Cup: After each use; press release, empty contents, reattach.

Clean Filters: Rinse pre-motor and post-motor filters monthly; air dry completely for 24 hours before reinserting.

Clear Brushroll: Remove hair and debris weekly; lift cover, cut and remove wrapped fibers.

Check for Blockages: If suction reduces, inspect hose, nozzle, and dust cup for clogs.

CAUTION! Unplug charger and ensure vacuum is off before maintenance. Do not use damaged parts.

Battery & Charging

Lithium-ion battery; charge using included dock.

1. Place on dock: Align contacts; charging begins (LED flashes red).
2. Full charge: LEDs turn solid green after approx. 4 hours.
3. Storage: Store on dock to maintain charge; avoid extreme temperatures.
4. Battery life: Up to 500 charge cycles; replace if run time significantly decreases.

WARNING! Use only Shark-approved charger. Do not expose battery to fire or water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Remove battery for 1 minute, reinsert, then charge fully.

Service: 1-800-798-7398; sharkclean.com