Shark WANDVAC WS632PK Vacuum Cleaner Manual

The Shark WANDVAC WS632PK is a lightweight, cordless stick vacuum cleaner designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, LED headlights, a removable battery, a washable filter, a crevice tool, and a multi-surface brush roll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Maintenance & Cleaning 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle, Removable battery, LED headlights, Washable filter, Crevice tool, Charging dock.

Feature	Description
Motorized floor nozzle	For powerful suction on carpets and hard floors
Removable battery	Lithium-ion battery for cordless operation
LED headlights	Illuminates hidden debris under furniture
Washable filter	Reusable filter for easy maintenance
Crevice tool	For tight spaces and corners
Charging dock	Wall-mountable dock for convenient storage and charging
POWER button	Turns vacuum on/off
Battery indicator	LED lights show remaining battery life
Dust cup release	Button to empty dust cup
Wand release	Button to detach wand for handheld use

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach wand to floor nozzle: Insert wand into nozzle until it clicks.
Attach handle to wand: Insert handle into top of wand until it clicks.
Install battery: Slide battery into handle until it locks.
Mount charging dock: Use screws to mount dock on wall near outlet.
Place vacuum on dock to charge.

WARNING! Ensure vacuum is turned off during assembly. Keep fingers away from moving parts.

First-Time Use

Fully charge battery before first use.

Charge: Place vacuum on dock; LED will indicate charging status.
Turn on: Press POWER button on handle.
Select mode: Use floor nozzle for floors; detach wand for above-floor cleaning.
Attach tools: Connect crevice tool for edges and corners.
After use: Empty dust cup and return to dock for charging.

CAUTION! Do not use on wet surfaces. Keep hair and loose clothing away from brush roll.

Specifications

Type: Cordless stick vacuum.
Power Source: Rechargeable lithium-ion battery.
Run Time: Up to 30 minutes on standard mode.
Charging Time: Approximately 3.5 hours.
Dust Cup Capacity: 0.5 liters.
Weight: 2.9 lbs (1.3 kg).
Filter: Washable foam and felt filter.
Attachments: Motorized floor nozzle, crevice tool.
Warranty: 1-year limited warranty.

Controls and Parts

Main controls located on handle. Parts: Handle with POWER button, wand, floor nozzle, battery, dust cup.

Handle: POWER button, battery indicator LEDs, wand release button. Floor Nozzle: Motorized brush roll, LED headlights. Dust Cup: Release button, empty latch. Battery: Removable, with charge indicator.

Operation: Press POWER to start; press again to stop. Battery LEDs show charge level (green=high, yellow=medium, red=low).

Cleaning Modes & Attachments

Two main modes: Floor cleaning and handheld cleaning.

Floor cleaning: Use assembled vacuum with floor nozzle.
Handheld cleaning: Press wand release, remove handle and wand for above-floor use.
Crevice tool: Attach to wand or handle for tight spaces.
Brush roll control: Automatically adjusts for carpets/hard floors.

Tip: For best results, empty dust cup before it reaches MAX line.

Emptying the Dust Cup

Empty dust cup after each use or when full.

Turn off vacuum and remove from dock.
Press dust cup release button and pull cup away from handle.
Hold over trash can; press empty latch to open bottom door.
Close door and reattach dust cup until it clicks.

WARNING! Do not use vacuum with full dust cup. Avoid inhaling dust.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean filter: Remove filter every month; rinse under water; air dry 24 hours.
Clear brush roll: Remove debris from brush roll regularly.
Check for blockages: Inspect wand, nozzle, and dust cup if suction decreases.
Wipe exterior: Use dry cloth to clean vacuum body.

CAUTION! Do not use vacuum without filter. Ensure all parts are completely dry before reassembly.

Battery & Charging

Battery is removable and rechargeable.

Charging: Place vacuum on dock; charging LED will glow red, then turn off when full.
Battery life: Up to 30 minutes depending on surface and mode.
Battery removal: Press battery release button to remove for storage or replacement.
Storage: Store in cool, dry place; charge at least every 6 months if not in use.

WARNING! Use only Shark-approved charger and battery. Do not expose battery to fire or extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged	Charge battery on dock for 3.5 hours.
Reduced suction	Full dust cup or clog	Empty dust cup; check for blockages in nozzle and wand.
Brush roll not spinning	Debris tangled	Turn off vacuum; clear hair and debris from brush roll.
Battery not charging	Poor contact	Ensure vacuum is properly seated on dock; clean charging contacts.
Overheating	Continuous use	Turn off vacuum; let cool for 45 minutes before resuming.

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com