Shark WANDVAC WS632GNBRN Vacuum Cleaner Manual

The Shark WANDVAC WS632GNBRN is a lightweight, cordless stick vacuum designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, a removable handheld pod, a washable filter, LED headlights, a crevice tool, and a multi-surface brush roll. Powered by a rechargeable lithium-ion battery, it offers multiple power modes and a wall-mountable charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Operating Instructions 8. Maintenance & Cleaning 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight stick body, Removable handheld pod, LED headlights, Multi-surface brush roll, Washable filter, Crevice tool, Wall-mount charging dock.

Feature	Description
Powerful Suction	High-efficiency motor for strong pickup on various surfaces
Cordless Design	Rechargeable lithium-ion battery for unrestricted movement
LED Headlights	Illuminates dust and debris in dark areas
Multi-Surface Brush Roll	Cleans both hard floors and carpets
Removable Handheld Pod	Detaches for above-floor cleaning and portable use
Washable Filter	Maintains suction power; can be rinsed and reused
Crevice Tool	Accesses tight spaces, corners, and upholstery
Wall-Mount Dock	For convenient storage and charging
Power Button	Turns vacuum on/off and cycles through power modes
Battery Indicator	LED lights show remaining battery charge

Assembly & Installation

Unpack and inspect all contents. Assemble vacuum and install charging dock.

Attach the handle: Align the handle with the main body until it clicks into place.
Install the floor nozzle: Connect the multi-surface floor nozzle to the wand until secure.
Mount the charging dock: Use included screws to mount dock on wall near an outlet.
Insert the battery: Ensure battery is fully charged before first use.

WARNING! Keep small parts away from children. Ensure dock is securely mounted to prevent falling.

First-Time Setup

Charge the vacuum completely before initial use.

Charge battery: Place vacuum on dock or plug charger directly into vacuum port.
Power on: Press power button; LED indicator will illuminate.
Select power mode: Press power button to cycle through Eco, Normal, and Max modes.
Test attachments: Attach crevice tool to handheld pod for above-floor cleaning.

CAUTION! Only use the provided charger. Do not use vacuum with wet filters.

Specifications

Model: Shark WANDVAC WS632GNBRN.
Type: Cordless Stick Vacuum with Handheld Pod.
Battery: Rechargeable Lithium-Ion, 22.2V.
Run Time: Up to 30 minutes (varies by power mode).
Charging Time: Approximately 3.5 hours.
Dust Cup Capacity: 0.15 dry quarts.
Filter: Washable foam and felt filter.
Attachments: Crevice tool, Multi-surface floor nozzle.
Weight: 3.5 lbs (with battery).
Power Source: 100-240V AC, 50/60Hz charging adapter.

Controls and Settings

Main controls located on handle. Power Button: Turns vacuum on/off, cycles through Eco, Normal, Max modes. Battery Indicator: Three LED lights show charge level (Green: High, Yellow: Medium, Red: Low).

Power Modes: Eco (extended runtime, lower suction), Normal (balanced cleaning), Max (maximum suction for tough messes).

To detach handheld pod: Press release button near wand connection. To empty dust cup: Press release button on dust cup and lift away from body.

Attachments & Accessories

Multi-Surface Floor Nozzle: For carpets and hard floors. Crevice Tool: For tight spaces, between cushions, and along edges.

Attach accessory: Align with end of wand or handheld pod and push until secure.
Use crevice tool: Attach to handheld pod for above-floor cleaning.
Switch to handheld: Press release button to detach pod from wand.

Tip: Clear brush roll of hair and debris regularly to maintain performance.

Operating Instructions

For floor cleaning: Use floor nozzle attached to wand. For above-floor cleaning: Use handheld pod with crevice tool.

Power on: Press power button; select desired mode.
Floor cleaning: Glide nozzle back and forth over surface.
Handheld cleaning: Detach pod, attach crevice tool, clean upholstery, stairs, etc.
Empty dust cup: Hold over trash, press release, empty contents.
Check filter: Remove and inspect filter after each use.
Recharge: Place on dock when not in use.

WARNING! Do not vacuum liquids, sharp objects, or hot ashes. Keep hair, loose clothing, and fingers away from moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance. Washable Filter: Rinse under cold water every month; air dry 24 hours before reuse. Brush Roll: Remove tangled hair and debris. Dust Cup: Empty after each use; wipe with dry cloth.

Battery & Charging

Use only provided charger and dock. Charge fully before first use. Battery Indicator: LEDs show status. Storage: Store in cool, dry place; charge every 6 months if not in use.

CAUTION! Do not expose battery to extreme temperatures. Do not attempt to disassemble battery.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted	Charge battery fully; ensure vacuum is properly seated on dock.
Reduced suction	Full dust cup or clog	Empty dust cup; check hose and nozzle for blockages; clean filter.
Brush roll not spinning	Tangled debris	Turn off vacuum; clear hair and fibers from brush roll.
Battery not charging	Faulty connection	Ensure dock is plugged in; clean charging contacts on vacuum and dock.
Overheating	Continuous use or clog	Turn off and let cool; check for blockages; clean filter.

Reset: Turn off, remove battery for 10 seconds, reinsert.

Service: 1-800-798-7398; sharkclean.com