Shark WANDVAC WS632BLBRN Vacuum Cleaner Manual

The Shark WANDVAC WS632BLBRN is a lightweight, cordless stick vacuum designed for quick cleanups. It features a powerful motor, a removable battery, a washable filter, a crevice tool, and a multi-surface brush roll. It is ideal for hard floors and low-pile carpets. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using the Vacuum 7. Emptying the Dust Cup 8. Cleaning & Maintenance 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight wand, Motorized floor nozzle, Removable battery, Washable filter, Crevice tool, Charging dock.

Feature	Description
Power Button	Turns vacuum on/off
Battery Release Button	Releases battery for charging or replacement
Dust Cup Release Button	Opens dust cup for emptying
Washable Filter	Captures fine dust; can be rinsed and dried
Motorized Brush Roll	Agitates carpets and hard floors
Crevice Tool	For tight spaces and edges
Charging Dock	Holds vacuum for upright charging
LED Indicators	Shows battery status and power mode
Wand Release Button	Detaches wand for above-floor cleaning
Handle Grip	Ergonomic design for comfortable use

Assembly & Installation

Unpack and inspect all parts. Assemble before first use.

Insert the battery: Align battery with handle slot, press until it clicks.
Attach the wand: Insert wand into handle until it clicks securely.
Attach the floor nozzle: Connect nozzle to end of wand until it clicks.
Attach the crevice tool: Store on dock or attach to wand for use.
Place on charging dock: Ensure contacts align; charge fully before first use.

WARNING! Do not force parts together. Ensure all clicks are heard for secure connection.

First-Time Use

Fully charge battery before first use.

Charge: Place vacuum on dock; LED will indicate charging (solid red) and fully charged (solid blue).
Power on: Press power button on handle; select suction mode (ECO or MAX).
Begin vacuuming: Push nozzle forward and back over surfaces.
Use tools: Detach wand to use crevice tool for corners and edges.
Empty dust cup: Press release button when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll while vacuum is on.

Specifications

Model: Shark WANDVAC WS632BLBRN.
Type: Cordless stick vacuum.
Battery: Rechargeable lithium-ion, removable.
Run Time: Up to 30 minutes (ECO mode), up to 15 minutes (MAX mode).
Charging Time: Approximately 3.5 hours.
Dust Cup Capacity: 0.15 dry quarts.
Filtration: Washable fine dust filter.
Attachments: Motorized floor nozzle, crevice tool.
Weight: Approximately 3.5 lbs.
Power Source: 120V AC, 60Hz charging dock.

Controls and Parts

Handle Controls: Power button, Battery release button. Main Body: Dust cup release, Filter cover, Wand release button.

LED Indicators: Battery status (red=charging, blue=charged, flashing red=low). Suction Mode: ECO (standard cleaning, longer run time) and MAX (deep cleaning, shorter run time) – toggle with power button.

Nozzle: Motorized brush roll for carpets and hard floors. Wand: Lightweight aluminum tube. Crevice Tool: For edges, corners, and tight spaces.

Using the Vacuum

For floors: Use motorized nozzle. For above-floor: Detach wand and use crevice tool.

Ensure battery is charged and dust cup is empty.
Press power button to turn on; press again to switch between ECO and MAX.
Push nozzle forward and pull back slowly over surface.
For edges, use crevice tool attached to wand.
Turn off after use; place on charging dock.

Tip: Empty dust cup frequently to maintain suction power.

Emptying the Dust Cup

Empty when dust reaches MAX line.

Turn off vacuum and remove from dock.
Hold over trash can; press dust cup release button.
Bottom will open; tap gently to empty debris.
Close dust cup until it clicks.
Check filter; clean if dirty.

WARNING! Do not use vacuum with full dust cup. Empty after each use for best performance.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

Filter: Remove monthly, rinse under cold water, air dry 24 hours before reinstalling.
Brush Roll: Check monthly for tangled hair/debris; cut and remove with scissors.
Nozzle and Wand: Wipe with dry cloth.
Charging Contacts: Keep clean and dry.

CAUTION! Do not use vacuum without filter. Ensure all parts are completely dry before reassembly.

Battery & Charging

Use only provided battery and charger.

Charging: Place vacuum on dock; LED turns red, then blue when fully charged.
Battery Life: Up to 30 minutes in ECO mode. Replace battery if run time shortens significantly.
Storage: Store in cool, dry place. Charge at least every 6 months if not in use.
Replacement: Press battery release button to remove; insert new battery until click.

WARNING! Do not expose battery to fire, water, or extreme temperatures. Use only Shark-approved batteries.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery disposal: Follow local regulations for lithium-ion batteries.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery dead/not installed	Charge battery; ensure it's clicked into place.
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filter; check for blockages in nozzle.
Brush roll not spinning	Tangled debris	Turn off, remove nozzle, and clear hair/debris from brush roll.
Battery not charging	Dirty contacts/dock issue	Clean charging contacts on vacuum and dock; ensure proper alignment.
Vacuum turns off during use	Overheating/full dust cup	Let cool for 45 minutes; empty dust cup; check filter.

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com