Shark WANDVAC WS632BL Vacuum Cleaner Manual

The Shark WANDVAC WS632BL is a lightweight, cordless stick vacuum designed for quick cleanups and versatile use. It features a powerful digital motor, a removable handheld pod, a crevice tool, a dusting brush, a washable filter, LED headlights, and a wall-mount charging dock. Powered by a rechargeable lithium-ion battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Parts 6. Operating Modes 7. Cleaning & Maintenance 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main body with motor, Removable handheld pod, Charging dock, Crevice tool, Dusting brush, Washable filter, LED headlights.

Feature	Description
Digital Motor	Powerful suction for effective cleaning
Removable Handheld Pod	Converts to a handheld vacuum for above-floor cleaning
Crevice Tool	For tight spaces and corners
Dusting Brush	For delicate surfaces and dusting
Washable Filter	Reusable filter for easy maintenance
LED Headlights	Illuminates dark areas under furniture
Wall-Mount Charging Dock	For convenient storage and charging
POWER Button	Turns vacuum on/off
Battery Indicator	LED lights show remaining battery charge
Dust Cup Release	Button to empty dust cup easily

Assembly & Installation

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the main body until it clicks into place.
Install the floor nozzle: Align the nozzle with the connector on the handle and push until secure.
Mount the charging dock: Use included screws to mount the dock on a wall near an outlet.
Attach tools: Store crevice tool and dusting brush on dock or attach to vacuum as needed.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Setup

Charge the vacuum fully before first use.

Charge the battery: Place vacuum on the charging dock; LED will indicate charging status.
Install the filter: Remove dust cup, insert washable filter, and reassemble.
Test operation: Press POWER button to ensure vacuum turns on.
Attach tools: Connect crevice tool or dusting brush for specific cleaning tasks.

CAUTION! Only use the provided charger and dock. Do not use with damaged parts.

Specifications

Model: WANDVAC WS632BL.
Type: Cordless Stick Vacuum.
Motor: High-efficiency digital motor.
Battery: Rechargeable lithium-ion.
Run Time: Up to 30 minutes on a full charge (varies by mode).
Charging Time: Approximately 3.5 hours.
Dust Cup Capacity: 0.15 gallons.
Weight: 3.5 lbs.
Included Accessories: Charging dock, crevice tool, dusting brush.
Power Source: 120V AC, 60Hz charging adapter.

Controls and Parts

Main Controls: POWER button, Battery indicator LEDs, Dust cup release button.

Parts Diagram: Main body, Handle, Floor nozzle, Removable handheld pod, Crevice tool, Dusting brush, Charging dock, Washable filter.

Operation: Press POWER to start; press again to stop. Battery indicator shows green (high), amber (medium), red (low). Empty dust cup when full indicator appears. Convert to handheld by pressing release button and separating pod from handle.

Operating Modes

Two main modes: Full-size stick mode for floors; Handheld mode for above-floor cleaning.

Stick Mode: Use for carpets and hard floors. Adjust handle angle for comfort.
Handheld Mode: Detach pod for stairs, upholstery, and cars. Attach tools as needed.
Tool Use: Attach crevice tool for edges and tight spaces; use dusting brush for shelves and blinds.

Tip: For best suction, empty dust cup regularly and clean filter monthly.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty contents into trash.
Clean filter: Remove filter, tap to remove dust, rinse with water, and air dry completely before reinstalling.
Check for blockages: Inspect nozzle, hose, and tools for clogs; remove debris.
Clean brushes: Remove hair and fibers from floor nozzle brush roll.

WARNING! Unplug charger and ensure vacuum is off before maintenance. Do not use without filter.

Battery & Charging

Use only the provided charging dock and adapter.

Charging: Place vacuum on dock; charging indicator lights will illuminate.
Battery status: Green (75-100%), Amber (25-74%), Red (0-24%).
Run time: Up to 30 minutes in standard mode; less in max suction mode.
Storage: Store on charging dock to keep battery charged.

CAUTION! Do not expose battery to extreme temperatures. Do not attempt to disassemble.

Care & Storage

Store in a cool, dry place. Keep away from water and heat sources.

CAUTION! Do not store with a wet filter. Always ensure vacuum is completely dry before storage.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted/not charged	Place on charging dock; ensure dock is plugged in.
Reduced suction	Full dust cup/clogged filter	Empty dust cup; clean filter; check for blockages.
Battery not charging	Faulty connection	Ensure vacuum is properly seated on dock; check power outlet.
Vacuum turns off during use	Overheating/battery protection	Allow to cool for 45 minutes; check for blockages.
Brush roll not spinning	Tangled debris	Turn off vacuum; remove debris from brush roll.

Reset: Remove battery for 10 seconds; reinstall and charge.

Service: 1-800-798-7398; sharkclean.com