Shark WANDVAC WS632 Vacuum Cleaner Manual

The Shark WANDVAC WS632 is a lightweight, cordless stick vacuum cleaner designed for quick cleanups and versatile floor-to-ceiling cleaning. It features a powerful motor, LED headlights, a washable filter, a crevice tool, and a charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lightweight wand, Motorized floor nozzle, LED headlights, Washable filter, Crevice tool, Charging dock.

Assembly & Setup

Unpack and inspect contents. Assemble before first use.

1. Insert battery: Align battery with slot on vacuum body; click into place.
2. Attach wand: Insert wand into vacuum body until it clicks.
3. Attach floor nozzle: Connect floor nozzle to wand until secure.
4. Mount charging dock: Use included screws to mount dock on wall near outlet.
5. Place vacuum on dock: Ensure charging contacts align; LED indicator will light.

WARNING! Charge fully before first use. Keep charger away from water.

First-Time Use

Fully charge vacuum; familiarize with controls.

1. Charge: Place on dock; charge until battery indicator shows full (approx. 4 hours).
2. Power on: Press and hold power button; select desired suction mode (if applicable).
3. Begin cleaning: Push vacuum forward and back on floors; use attachments as needed.
4. Empty dust cup: Press release button; empty contents into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark WANDVAC WS632.
• Type: Cordless stick vacuum.
• Battery: Rechargeable lithium-ion.
• Run Time: Up to 30 minutes on standard mode.
• Charging Time: Approximately 4 hours.
• Dust Cup Capacity: 0.5 liters.
• Weight: 3.5 lbs (1.6 kg).
• Attachments: Crevice tool, charging dock.
• Filter: Washable, reusable.
• Power Source: 120V AC, 60Hz charging dock.

Controls and Indicators

Power Button: Press and hold to operate; release to turn off. Battery Indicator: LED lights show charge level (green = high, yellow = medium, red = low).

Charging Dock: LED indicates charging (red = charging, green = fully charged).

Suction Modes: Standard mode for general cleaning; Boost mode (if equipped) for extra power. Attachment Buttons: Wand release and dust cup release for quick disassembly.

Cleaning Modes & Attachments

Use attachments for versatile cleaning.

1. Floor cleaning: Use motorized floor nozzle on carpets and hard floors.
2. Above-floor cleaning: Detach wand; use handheld vacuum for furniture and stairs.
3. Crevice tool: Attach for tight spaces like between cushions and along edges.
4. LED headlights: Automatically illuminate when vacuum is on.

Tip: Regularly check floor nozzle for hair or debris wrap.

Emptying the Dust Cup

Empty dust cup when full or after each use.

1. Turn off vacuum and remove from dock.
2. Press dust cup release button; detach cup from vacuum body.
3. Hold over trash; press bottom release to open door; shake gently.
4. Close door; reattach dust cup until it clicks.
5. Check filter; clean if necessary.

WARNING! Do not use vacuum with full dust cup; suction will decrease.

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Clean filter monthly: Remove filter; rinse under cold water; air dry 24 hours.
2. Clear floor nozzle: Remove hair and debris from brush roll.
3. Check battery: Avoid extreme temperatures; store in cool, dry place.
4. Clean dust cup: Wipe with dry cloth; do not immerse in water.

CAUTION! Do not use damaged battery or charger. Use only Shark-approved parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Remove battery for 30 seconds; reinsert.

Service: 1-800-798-7398; sharkclean.com