Shark WANDVAC SYSTEM WV362UK Series Vacuum Cleaner Manual

The Shark WANDVAC SYSTEM WV362UK Series is a powerful, lightweight cordless stick vacuum designed for quick clean-ups and versatile floor-to-ceiling cleaning. It features a motorized floor nozzle, a crevice tool, a dusting brush, a charging dock, and a removable battery. The system offers multiple power modes, a hygienic dirt ejector, HEPA filtration, and is compatible with various Shark accessories. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes & Operation 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Cordless vacuum body, Motorized floor nozzle, Crevice tool, Dusting brush, Charging dock, Removable lithium-ion battery, Wall mount.

FeatureDescription
Motorized floor nozzleFor carpets and hard floors; brush roll spins to lift dirt
Crevice toolFor tight spaces, corners, and along edges
Dusting brushFor delicate surfaces, upholstery, and shelves
Charging dockFor storing and charging the vacuum
Removable batteryLithium-ion; provides cordless runtime; interchangeable
HEPA filtrationCaptures 99.9% of dust and allergens
Hygienic dirt ejectorOne-touch button to empty dust cup without touching dirt
Power modesECO, NORMAL, BOOST for varying suction power
LED indicatorsShow battery status and mode
Wand release buttonFor quick detachment to use as a handheld vacuum

Assembly & Installation

Unpack and inspect all contents. Ensure all parts are present.

  1. Insert the battery: Align battery with vacuum body, slide in until it clicks.
  2. Attach the wand: Insert wand into vacuum body until it clicks securely.
  3. Attach floor nozzle: Connect nozzle to end of wand until it clicks.
  4. Install charging dock: Mount on wall using provided screws or place on stable surface.
  5. Charge the vacuum: Place vacuum on dock; ensure charging light illuminates.

WARNING! Do not use if any part is damaged. Keep battery away from heat and water.

First-Time Setup

Fully charge before first use.

  1. Charge: Place vacuum on dock; initial charge takes approx. 4 hours.
  2. Power on: Press and hold power button; select mode (ECO recommended for first use).
  3. Test attachments: Attach crevice tool and dusting brush to ensure proper fit.
  4. Empty dust cup: Press dirt ejector button to open and ensure it's empty.
  5. Check filters: Ensure HEPA filter and pre-motor filter are correctly installed.

CAUTION! Only use Shark-approved batteries and chargers.

Specifications

Controls and Settings

Power Button: Press and hold to turn on/off; press to cycle modes (ECO → NORMAL → BOOST). LED Indicators: Green (full charge), Amber (medium), Red (low), Flashing Red (needs charge). Dirt Ejector Button: Press to release dust cup bottom and empty debris. Wand Release Button: Press to detach wand for handheld use. Battery Release Button: Press to remove battery for charging separately.

Cleaning Modes: ECO for extended runtime on light dirt, NORMAL for everyday cleaning, BOOST for maximum suction on heavy dirt.

Using Attachments

Detach wand to use as handheld vacuum; attach tools directly to vacuum body.

  1. Crevice Tool: For corners, stairs, car interiors.
  2. Dusting Brush: For blinds, keyboards, lampshades, delicate surfaces.
  3. Motorized Floor Nozzle: For carpets and hard floors; automatically adjusts height.
  4. Upholstery Tool (optional): For sofas, mattresses, curtains.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes & Operation

For floors, above-floor surfaces, and quick pickups.

  1. Select mode: Press power button to cycle to desired setting.
  2. Floor cleaning: Glide nozzle back and forth; vacuum automatically adjusts suction.
  3. Above-floor cleaning: Detach wand, attach tool, clean surfaces.
  4. Empty dust cup: Hold over trash; press dirt ejector button.
  5. Recharge: Place on dock when not in use; battery indicator shows status.
  6. Store: Use wall mount or dock to save space.

WARNING! Do not vacuum wet spills, large objects, or hot ashes. Keep hair and strings away from brush roll.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filters monthly: Remove HEPA and pre-motor filters; rinse with cold water; air dry 24 hours.
  3. Check brush roll: Remove debris wrapped around roll; clear blockages.
  4. Battery care: Store in cool, dry place; avoid full discharges.
  5. Clean attachments: Wipe with damp cloth; ensure they are dry before use.

CAUTION! Do not wash filters with detergents. Ensure all parts are completely dry before reassembly.

Regulatory Information

CE marked; complies with EU directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. Battery must be removed before disposal. For EU compliance, this product meets RoHS requirements. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not charged/deadCharge fully; ensure battery is inserted correctly; try another battery.
Reduced suctionFull dust cup/clogged filterEmpty dust cup; clean filters; check hose for blockages.
Brush roll not spinningDebris wrapped around rollTurn off; clear hair and strings from brush roll.
Battery drains quicklyOld battery/BOOST mode overuseUse ECO mode for longer runtime; replace battery if old.
Vacuum not chargingFaulty dock/connectionEnsure vacuum is properly seated on dock; check power outlet; clean charging contacts.
Unusual noiseBlockage in nozzle or hoseTurn off; inspect and clear blockage from air path.

Reset: Remove battery for 10 minutes, then reinsert.

Service: 0800 862 0453; www.sharkclean.co.uk

Shark WANDVAC SYSTEM WV362UK Series Vacuum Cleaner Manual © - All Rights Reserved 2025