Shark WANDVAC SYSTEM WV361UK Series Vacuum Cleaner Manual

The Shark WANDVAC SYSTEM WV361UK Series is a powerful, cordless, lightweight stick vacuum cleaner designed for quick clean-ups and versatile floor-to-ceiling cleaning. It features a removable handheld pod, a motorized brush roll, a crevice tool, a multi-surface docking station, LED headlights, and a rechargeable lithium-ion battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Parts 6. Using Your Vacuum 7. Maintenance & Emptying 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Handheld Vacuum Pod, Wand Handle, Motorized Floor Nozzle, Multi-Surface Docking Station, Crevice Tool, Charger, and Dust Cup.

Feature	Description
Motorized Brush Roll	Deep cleans carpets and hard floors; anti-hair wrap technology
Removable Handheld Pod	Converts to a portable vacuum for above-floor cleaning
Cordless & Lightweight	Easy maneuverability with no power cord restrictions
LED Headlights	Illuminates hidden dust and debris under furniture
Multi-Surface Docking Station	Stores vacuum and tools; acts as a charging dock
High-Efficiency Dust Cup	Easy-empty, bagless design with filter
Crevice Tool	Attaches for cleaning tight spaces and edges
POWER Button	Turns vacuum on/off; located on the handle
Battery Indicator	LED lights show remaining battery charge
Release Buttons	For detaching the handheld pod and wand

Assembly & Installation

Unpack all parts and inspect contents. Assemble on a clean, flat surface.

Attach the Wand: Insert the wand into the floor nozzle until it clicks securely.
Attach the Handle: Slide the handle onto the top of the wand until it clicks.
Install the Docking Station: Mount the docking station on a wall using provided screws (ensure it is near a power outlet).
Place the Vacuum: Hang the assembled vacuum on the docking station prongs.
Attach Tools: Store the crevice tool on the side of the docking station.

WARNING! Ensure all connections click into place. Do not force parts together.

First-Time Setup

Before first use, fully charge the vacuum.

Initial Charge: Plug the charger into the docking station's port and a wall outlet. Place the vacuum on the dock. Charge for at least 4 hours until battery indicator shows full.
Check Filters: Ensure the dust cup filter is properly seated and clean.
Test Operation: Remove the vacuum from the dock, press the POWER button, and run it on a hard floor to ensure proper suction and brush roll movement.
Convert to Handheld: Press the release buttons to detach the pod for above-floor cleaning.

CAUTION! Only use the provided charger. Do not use the vacuum while it is charging.

Specifications

Model: Shark WANDVAC SYSTEM WV361UK Series.
Type: Cordless Stick Vacuum with Handheld Pod.
Power Source: Rechargeable Lithium-Ion Battery.
Run Time: Up to 40 minutes (varies by power mode and surface).
Charging Time: Approximately 4 hours for a full charge.
Dust Cup Capacity: 0.5 Liters.
Noise Level: < 80 dB.
Included Tools: Motorized Floor Nozzle, Crevice Tool, Docking Station.
Weight: Approximately 2.5 kg (5.5 lbs).
Warranty: 2-Year Limited Warranty.

Controls and Parts

Main controls are located on the handle and body.

Handle: POWER Button (On/Off), Battery Indicator LEDs (3 lights).

Body: Release Buttons (for pod and wand), Dust Cup Release Button, Brush Roll On/Off Switch (on floor nozzle).

Docking Station: Charging Contacts, Tool Holders.

Operation Modes: Standard cleaning with motorized brush roll (for floors). Handheld mode (for upholstery, stairs, cars). Brush roll can be turned off for delicate rugs.

Using Your Vacuum

For floors, use the full assembly. For above-floor cleaning, use the handheld pod.

Power On: Press the POWER button on the handle.
Floor Cleaning: Glide the floor nozzle forward and back. The LED lights will illuminate.
Switch to Handheld: Press the release buttons to detach the pod. Attach the crevice tool if needed.
Turn Off Brush Roll: Use the switch on the floor nozzle for delicate surfaces.
After Use: Press POWER to turn off. Return the vacuum to the docking station to recharge.

Tip: Empty the dust cup when it reaches the MAX fill line for optimal performance.

Maintenance & Emptying

Regular maintenance ensures peak performance.

Emptying the Dust Cup: Hold the vacuum over a bin. Press the dust cup release button and pull the cup away. Empty contents. Reattach until it clicks.
Cleaning the Filter: Remove the filter from the dust cup. Rinse with cold water only. Let it air dry completely for 24 hours before reinstalling.
Clearing Brush Roll: Turn the floor nozzle over. Use the provided cleaning tool or scissors to cut away any wrapped hair or fibers from the brush roll.
Check for Blockages: Inspect the wand, hose, and nozzle openings for obstructions if suction is reduced.

WARNING! Unplug the charger and ensure the vacuum is OFF before performing any maintenance. Do not use the vacuum with a wet filter.

Battery & Charging

The lithium-ion battery is not user-replaceable.

Charging: Place the vacuum on the docking station. The battery indicator will light up during charging. All three lights will be steady when fully charged.
Maximizing Battery Life: Store the vacuum on the dock when not in use. Avoid completely draining the battery. Use in normal room temperatures.
Battery Indicator: 3 Lights = High charge. 2 Lights = Medium. 1 Flashing Light = Low, recharge soon.

CAUTION! Do not attempt to disassemble the battery. Dispose of the vacuum according to local electronic waste regulations.

Care & Storage

Store in a cool, dry place. Always store on the docking station to keep it charged and ready.

Clean exterior with a dry cloth. Do not immerse any part in water.

CAUTION! Keep hair, loose clothing, fingers, and feet away from brush roll and openings. Do not use to pick up liquids or wet debris.

Regulatory Information

This device complies with relevant UK and EU safety and electromagnetic compatibility (EMC) directives. The battery must be disposed of separately from household waste. For recycling information, contact your local council. Copyright © SharkNinja Operating LLC. Shark and WANDVAC are trademarks of SharkNinja. For support in the UK, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted/not charging	Place on dock to charge. Ensure dock is plugged in. Check power outlet.
Reduced suction or no suction	Full dust cup, clog, or dirty filter	Empty dust cup. Check for blockages in nozzle, wand, and pod. Clean and dry the filter.
Brush roll not spinning	Hair/debris wrap, switch off	Clear debris from brush roll. Ensure brush roll switch on floor nozzle is ON.
Vacuum shuts off during use	Overheating or battery protection	Turn off and let cool for 45-60 minutes. Check for blockages causing motor strain.
Battery not holding charge	Old battery, extreme temperatures	Battery may be near end of life after years of use. Contact customer service.
Handheld pod won't detach	Release buttons not fully pressed	Press both release buttons simultaneously and firmly pull the pod away.

Reset: If the vacuum behaves unexpectedly, turn it off, remove it from the dock, and let the battery drain completely. Then recharge fully.

Service: For warranty service, do not open the unit. Contact Shark Customer Service: 0800 862 0453 (UK) or www.sharkclean.co.uk.