Shark Wandvac System WS630 Series Vacuum Cleaner Manual

The Shark Wandvac System WS630 Series is a powerful, cordless, handheld vacuum cleaner designed for quick cleanups and versatile use. It features a lightweight, ergonomic design, a motorized brush roll for deep cleaning on carpets and hard floors, a two-speed suction control, a large-capacity dust cup with easy-empty mechanism, a washable filter, a crevice tool, and a charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, Motorized brush roll, Dust cup with latch, Washable filter, Charging dock, AC power adapter, Crevice tool.

Assembly & Charging

Unpack and inspect all contents. Ensure all parts are present.

1. Charge the vacuum: Place the vacuum onto the charging dock or connect the AC adapter directly to the vacuum's charging port.
2. Attach the crevice tool: Align the crevice tool with the vacuum nozzle and press until it clicks into place.
3. Install the filter: Ensure the washable filter is correctly seated inside the dust cup lid.
4. Mount the dock (optional): Use included screws to mount the charging dock on a wall near an outlet.

WARNING! Only use the provided Shark charger. Do not use if the vacuum or charger is damaged.

First-Time Setup

Fully charge the vacuum before first use (approx. 4 hours).

1. Initial charge: Indicator light will glow red while charging, and turn blue when fully charged.
2. Test operation: Press the POWER button to turn on. Press again to switch to High speed.
3. Empty dust cup: Before first use, ensure the dust cup is empty and the filter is clean and dry.
4. Check brush roll: Ensure the motorized brush roll spins freely and is free of obstructions.

CAUTION! Do not use on wet surfaces or to pick up liquids. Do not vacuum hot ashes or sharp objects.

Specifications

• Model: Shark Wandvac System WS630 Series.
• Power Source: Rechargeable lithium-ion battery.
• Charging Time: Approximately 4 hours for full charge.
• Run Time: Up to 20 minutes on Low, 10 minutes on High (varies with use).
• Dust Cup Capacity: 0.5 liters.
• Filter: Washable foam and felt filter.
• Attachments: Motorized brush roll, crevice tool.
• Weight: 2.5 lbs (1.1 kg).
• Input: 100-240V AC, 50/60Hz for charger.

Controls and Settings

Main controls are located on the vacuum body.

POWER Button: Press once to turn on Low speed. Press again to switch to High speed. Press a third time to turn off.

Brush Roll On/Off: The motorized brush roll activates automatically when the vacuum is turned on. It can be turned off for hard floor cleaning by pressing the brush roll button (if equipped).

LED Indicators: Battery/charging indicator (red=charging, blue=charged/flashing low). Brush roll indicator (lights up when brush roll is on or if an obstruction is detected).

Dust Cup Release: Press the latch at the bottom of the dust cup to empty debris.

Using Attachments

The crevice tool is ideal for tight spaces.

1. Turn off the vacuum.
2. Align the crevice tool with the vacuum nozzle.
3. Push firmly until it clicks into place.
4. Turn on the vacuum and guide the tool into corners, between cushions, or along edges.
5. To remove, pull the tool straight off the nozzle.

Tip: For best suction, ensure the attachment is clicked securely into place before use.

Cleaning Modes & Surfaces

Designed for quick pickups on various surfaces.

1. Carpets & Rugs: Use with motorized brush roll on High speed for embedded dirt and pet hair.
2. Hard Floors: Use on Low or High speed. For large debris, you may turn off the brush roll.
3. Upholstery & Stairs: Use with crevice tool or the main nozzle. Hold the fabric taut for best results.
4. Car Interiors: Ideal for cleaning seats, floor mats, and tight spaces. Ensure the battery is charged.

WARNING! Do not use on people or animals. Keep hair, loose clothing, and fingers away from openings.

Emptying & Cleaning the Dust Cup

Empty the dust cup after each use or when the full indicator is visible.

1. Turn off and unplug the vacuum from the charger.
2. Hold the vacuum over a trash can.
3. Press the dust cup release latch at the bottom. The door will open, releasing debris.
4. Tap gently to remove fine dust. Close the door until it clicks.
5. For deep cleaning: Remove the filter lid, take out the washable filter, and rinse with water. Let it dry completely for 24 hours before reassembling.

CAUTION! Do not use the vacuum without the filter installed and completely dry.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

• Filter: Rinse the washable filter every month under tap water. Air dry for 24 hours.
• Brush Roll: Regularly remove hair and fibers wrapped around the brush roll. Use scissors if necessary.
• Exterior: Wipe with a dry or slightly damp cloth. Do not immerse in water.
• Battery: For storage, charge fully and store in a cool, dry place. Use regularly to maintain battery health.

CAUTION! Do not use harsh chemicals or abrasives. Keep charger and vacuum away from water.

Regulatory Information

FCC Part 15 Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Wandvac are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: If unresponsive, remove from charger, hold POWER button for 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com