Shark Wandvac System WS620 Vacuum Cleaner Manual

The Shark Wandvac System WS620 is a lightweight, cordless, handheld vacuum cleaner designed for quick cleanups on hard floors and carpets. It features a powerful motor, washable filter, crevice tool, dusting brush, charging dock, LED headlights, and a two-speed setting (Low/High). Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Operating Instructions 8. Maintenance & Cleaning 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Handheld vacuum body, Charging Dock, Crevice Tool, Dusting Brush, Washable Filter, LED Headlights.

Feature	Description
Power Button	Turns vacuum on/off; cycles between Low and High speed
LED Headlights	Illuminates dark areas for better visibility
Dust Cup Release	Button to empty dust cup
Charging Dock	Stores and charges the vacuum
Crevice Tool	For tight spaces and edges
Dusting Brush	For delicate surfaces and dusting
Washable Filter	Reusable filter for maintained suction
Battery Indicator	LED lights show battery charge level
Wall Mount	Optional mounting for storage
Lightweight Design	Easy to carry and use above floor

Assembly & Installation

Unpack and inspect all contents. Assemble attachments.

Attach tools: Press crevice tool or dusting brush onto vacuum nozzle until it clicks.
Install filter: Ensure washable filter is correctly seated in dust cup.
Set up charging dock: Place dock on a stable, flat surface near an outlet.
Charge vacuum: Place vacuum onto dock, ensuring charging contacts align.

WARNING! Do not use vacuum if it appears damaged. Ensure filter is dry before use.

First-Time Use

Fully charge before first use.

Charge: Place on dock; charge until battery indicator shows full (approx. 3.5 hours).
Power on: Press Power button; select Low or High speed.
Test attachments: Try crevice tool and dusting brush on appropriate surfaces.
Empty dust cup: Press release button and empty contents into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark Wandvac System WS620.
Type: Cordless Handheld Vacuum.
Power Source: Rechargeable Lithium-Ion Battery.
Charging Time: Approx. 3.5 hours.
Run Time: Up to 20 minutes (varies by speed and use).
Speeds: Low and High.
Filter: Washable, reusable foam and felt filter.
Dust Cup Capacity: 0.11 dry quarts.
Weight: Approx. 1.5 lbs.
Included: Vacuum, Charging Dock, Crevice Tool, Dusting Brush, Filter.

Controls and Settings

Main control: Power Button (On/Off & Speed Selection).

Operation: Press once for Low speed, press again for High speed, press again to turn off. Battery Indicator LEDs: Show remaining charge (3 LEDs = High, 2 = Medium, 1 = Low, Flashing = Needs charge).

Settings: No user-adjustable settings beyond speed selection. Maintenance: Regular emptying of dust cup and washing of filter.

Attachments & Accessories

Crevice Tool: For corners, between cushions, and along edges. Dusting Brush: For blinds, lampshades, keyboards, and other delicate surfaces.

To attach: Align attachment with vacuum nozzle and push until it clicks.
To remove: Pull attachment straight off nozzle.
Storage: Store attachments on dock or wall mount when not in use.

Tip: Use the dusting brush for upholstery to avoid scratching fabric.

Operating Instructions

For quick cleanups on floors, stairs, furniture, and cars.

Ensure vacuum is charged and filter is clean.
Press Power button to select desired speed (Low for longer runtime, High for more suction).
Glide nozzle over surface. Use LED lights to see in dark areas.
For attachments: Turn vacuum off, attach tool, then turn on.
When finished, turn off and place on charging dock.
Empty dust cup after each use for best performance.

WARNING! Do not use to vacuum hazardous materials, matches, or sharp objects.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button, empty contents, close securely.
Clean Filter: Remove filter, rinse under lukewarm water until water runs clear. Air dry for 24+ hours completely before reinstalling.
Clean Nozzle & Tools: Wipe with a dry cloth. Check for blockages.
Clean Charging Contacts: Wipe dock and vacuum contacts with dry cloth.

CAUTION! Never use vacuum without a completely dry filter. Do not immerse vacuum in water.

Battery & Charging

Lithium-Ion battery; charge only with provided dock.

Charging: Place vacuum on dock. Battery indicator will flash while charging, stay solid when full. Storage: If storing for extended periods, charge to full, then store in a cool, dry place. Disposal: Dispose of battery according to local regulations; do not incinerate.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product contains a lithium-ion battery. Follow local ordinances for disposal.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted	Place on charging dock for at least 10 minutes, then try again.
Weak suction or no suction	Full dust cup, clog, or wet filter	Empty dust cup, check for blockages in nozzle/tools, ensure filter is clean and completely dry.
Battery not charging	Poor contact, faulty outlet	Clean charging contacts on vacuum and dock, try a different outlet.
Vacuum turns off during use	Overheating or battery protection	Turn off and let cool for 45-60 minutes. Check and clean filter.
LED lights not working	Headlight issue	Does not affect suction. Contact customer service if desired.
Attachment won't stay on	Not fully clicked in or worn	Detach and reattach firmly. If problem persists, contact support.

Reset: No user-resettable function. For persistent issues, contact support.

Service: 1-800-798-7398; sharkclean.com