Shark WANDVAC SELF-EMPTY SYSTEM Vacuum Cleaner Manual

The Shark WANDVAC SELF-EMPTY SYSTEM is a cordless, self-emptying stick vacuum designed for powerful, convenient cleaning. It features a self-emptying base that automatically empties the dust cup, powerful suction with DuoClean technology, a lightweight wand design, multiple cleaning modes, a HEPA filtration system, and a long-lasting rechargeable battery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Vacuum wand with motor, Self-Emptying Base, Charging Dock, Crevice Tool, Dusting Brush, and Owner's Guide.

Unpacking & Setup

Carefully unpack all components. Place the Self-Emptying Base on a firm, level surface against a wall.

1. Assemble the base: Insert the bag into the base compartment until it clicks.
2. Attach the wand: Insert the vacuum wand into the charging dock on the base until it locks.
3. Install accessories: Attach the crevice tool or dusting brush to the wand as needed.
4. Plug in the base: Connect the power adapter to the base and a wall outlet.

WARNING! Ensure the base is on a stable surface and the area is clear of obstructions. Keep the vacuum away from water.

First-Time Use

Fully charge the vacuum before first use.

1. Charge: Place the wand in the dock; the battery indicator will light up during charging.
2. Power on: Press the power button on the wand to turn on the vacuum.
3. Select mode: Use the mode button to cycle through Eco, Normal, and Max settings.
4. Begin cleaning: Push the vacuum forward on floors or carpets; the brush roll will engage automatically.
5. Empty dust cup: After cleaning, place the wand in the base; it will self-empty automatically.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

• Model: Shark WANDVAC SELF-EMPTY SYSTEM.
• Type: Cordless stick vacuum with self-emptying base.
• Suction Power: Adjustable via Eco, Normal, Max modes.
• Battery: Rechargeable lithium-ion; up to 60 minutes runtime (Eco mode).
• Dust Cup Capacity: 0.5 quarts (wand); base bag holds up to 30 days of debris.
• Filtration: HEPA filter; washable.
• Weight: Approx. 6.5 lbs (wand only).
• Charging Time: Approx. 4 hours for full charge.
• Power Source: 120V AC, 60Hz for base charging.
• Accessories Included: Crevice tool, dusting brush, charging dock, extra filter.

Controls and Indicators

Wand Controls: Power button, Mode button (Eco/Normal/Max), Brush roll on/off switch.

Base Indicators: Power light, Bag full indicator, Charging status lights.

Battery Indicator (on wand): 3 LED lights show charge level (Green: High, Yellow: Medium, Red: Low). Self-Emptying Indicator: Flashing light on base when emptying is in progress. Error Indicators: Red light for clog, bag full, or charging issue.

Using the Vacuum

For floors: Use DuoClean head for hard floors and carpets. For above-floor cleaning: Attach crevice tool or dusting brush.

1. Turn on vacuum with power button.
2. Select cleaning mode based on surface (Eco for hard floors, Max for carpets).
3. Move vacuum slowly in forward and backward motions.
4. Use brush roll on/off switch for delicate rugs.
5. After use, place wand in base for self-emptying and charging.

Tip: Empty the dust cup after each use for optimal suction. Clean filters monthly.

Self-Emptying Base Operation

The base automatically empties the wand's dust cup when docked.

1. Dock the wand: Place wand into charging dock on base.
2. Emptying process: Base will activate, suctioning debris from dust cup into sealed bag.
3. Completion: Indicator light will turn off when process is complete.
4. Bag replacement: When "Bag Full" light illuminates, replace the bag in the base compartment.

WARNING! Do not interrupt the self-emptying process. Ensure the base is plugged in and the bag is properly installed.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

• Empty dust cup: Self-emptying base handles this; manually empty if needed.
• Clean filters: Rinse HEPA filter and pre-motor filter under water every month; air dry completely for 24 hours before reinserting.
• Check brush roll: Remove tangled hair or debris from brush roll regularly.
• Inspect accessories: Clear blockages from crevice tool and dusting brush.
• Base bag replacement: Replace bag when indicator light comes on.

CAUTION! Unplug base before maintenance. Do not use damaged filters or bags.

Battery & Charging

The lithium-ion battery is rechargeable and long-lasting.

1. Charging: Place wand in dock; charging indicator lights will illuminate.
2. Runtime: Up to 60 minutes in Eco mode, 30 minutes in Normal, 15 minutes in Max.
3. Battery care: Store in a cool, dry place. Avoid complete discharge.
4. Replacement: Contact Shark Customer Service for battery replacement if needed.

Note: Battery performance may decrease over time. Use only Shark-approved chargers.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. Properly dispose of the vacuum and battery according to local regulations.

Troubleshooting

Reset: Remove and reinsert battery if applicable; unplug base for 10 minutes.

Service: 1-800-798-7398; sharkclean.com