Shark WANDVAC POWER PET QV410QMG Vacuum Cleaner Manual

The Shark WANDVAC POWER PET QV410QMG is a lightweight, cordless stick vacuum designed for quick cleanups and pet hair removal. It features a powerful motor, a crevice tool, a multi-surface brush roll, a wall-mountable charging dock, a washable dust cup, and a lithium-ion battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Using the Vacuum 7. Emptying & Cleaning the Dust Cup 8. Maintenance & Filter Care 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Charging Dock, Crevice Tool, Multi-Surface Brush Roll, Washable Foam and Felt Filters, Lithium-ion Battery.

Feature	Description
Power Button	Turns vacuum on/off; press and hold for max power mode
Battery Indicator LED	Shows battery status (green=charged, red=low/charging)
Dust Cup Release Button	Releases dust cup for emptying
Washable Dust Cup	Transparent container for collected debris; easy to clean
Multi-Surface Brush Roll	Cleans hard floors and carpets; detachable for cleaning
Crevice Tool	For tight spaces, corners, and upholstery
Charging Dock	Wall-mountable dock for storage and charging
Filter Access	Removable foam and felt filters for maintenance
Lightweight Design	Easy to carry and maneuver
Pet Hair Power	Specialized suction for removing pet hair from surfaces

Assembly & Installation

Unpack and inspect all contents. Ensure all parts are present.

Charge the vacuum: Place vacuum onto charging dock; plug dock into wall outlet. Initial charge: 4 hours.
Attach tools: Press crevice tool onto vacuum nozzle until it clicks.
Mount charging dock: Use included screws to mount dock on wall near outlet (optional).
Install filters: Ensure foam and felt filters are correctly placed inside dust cup.

WARNING! Use only the provided charger. Do not use if any part is damaged.

First-Time Use

Fully charge before first use. Power on and test.

Fully charge: Place on dock until battery LED turns solid green (approx. 4 hours).
Power on: Press power button; vacuum will start in standard mode.
Select mode: Press and hold power button for MAX mode (increased suction).
Begin cleaning: Glide vacuum over floors and surfaces.
Empty dust cup: Press release button, remove cup, and empty debris into trash.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

Model: WANDVAC POWER PET QV410QMG.
Type: Cordless Stick Vacuum.
Power Source: Rechargeable Lithium-ion Battery.
Charge Time: Approx. 4 hours for full charge.
Run Time: Up to 20 minutes (standard mode); up to 10 minutes (MAX mode).
Dust Cup Capacity: 0.15 dry quarts.
Filters: Washable Foam and Felt Filters.
Included Tools: Crevice Tool, Multi-Surface Brush Roll, Charging Dock.
Weight: Approx. 3 lbs.
Input: 100-240V AC, 50/60Hz for charger.

Controls and Indicators

Main Controls: Power Button (On/Off/Max Mode). Indicators: Battery LED (Solid Green=Full, Flashing Green=Charging, Red=Low).

Power Modes: Standard (single press), MAX (press and hold for 2 seconds).

Battery LED Behavior:
- Solid Green: Battery fully charged.
- Flashing Green: Actively charging.
- Solid Red: Battery low, recharge soon.
- Flashing Red: Battery critically low or charging error.

Using the Vacuum

For floors, carpets, and above-floor cleaning.

Turn on: Press power button.
Select surface: Use multi-surface brush roll for floors/carpets.
Use tools: Attach crevice tool for edges, corners, furniture.
Max power: Press and hold power button for pet hair or deep cleaning.
Turn off: Press power button again.
Recharge: Place on dock when not in use.

Tip: Empty dust cup when debris reaches MAX line for optimal performance.

Emptying & Cleaning the Dust Cup

Empty regularly to maintain suction.

Turn off and remove from dock.
Press dust cup release button; pull cup away from body.
Hold over trash; press bottom latch to open door and empty debris.
Close door securely.
Reinsert cup until it clicks.
Wash cup: Rinse with water if needed; air dry completely before reuse.

WARNING! Do not use if dust cup is wet. Ensure it is completely dry.

Maintenance & Filter Care

Clean filters monthly for best performance.

Remove dust cup.
Take out foam filter (front) and felt filter (rear).
Tap filters over trash to remove loose dust.
Rinse filters under lukewarm water until water runs clear.
Squeeze excess water (do not wring).
Air dry completely (24 hours) before reinstalling.
Reinstall filters: Foam first, then felt, then dust cup.

CAUTION! Never use vacuum without filters. Do not operate with wet filters.

Battery & Charging

Lithium-ion battery; use only provided charger.

Charging: Place vacuum on dock; plug charger into outlet. LED flashes green while charging, solid green when full.
Storage: Store on dock to keep battery charged. If storing long-term, charge to 50% and store in cool, dry place.
Battery Life: Battery may degrade over time; typical life 2-3 years with normal use.
Replacement: Contact Shark Customer Service for battery replacement; do not disassemble.

WARNING! Do not expose battery to fire, extreme heat, or puncture. Use only Shark-approved charger.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery disposal: Dispose of battery according to local regulations; do not dispose in household trash.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery dead/not charged	Place on charging dock for 4 hours; ensure dock is plugged in.
Weak suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose for blockages.
Battery not charging	Faulty connection/outlet	Ensure vacuum is seated properly on dock; try different outlet.
Brush roll not spinning	Hair/debris tangled	Turn off; remove brush roll and clean wrapped debris.
Vacuum turns off during use	Overheating/battery low	Let cool for 45 minutes; recharge fully.
LED flashing red	Battery error/overheating	Remove from dock; let cool; recharge. If persists, contact support.

Reset: Remove from dock, press power button for 10 seconds, then recharge.

Service: 1-800-798-7398; sharkclean.com