Shark WANDVAC POWER PET QV410QGU Vacuum Cleaner Manual

The Shark WANDVAC POWER PET QV410QGU is a lightweight, cordless, handheld vacuum cleaner designed for quick cleanups and pet hair removal. It features a powerful motor, a rechargeable lithium-ion battery, a washable filter, a crevice tool, a multi-surface brush, and a pet hair removal tool. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Parts & Components 4. Charging the Vacuum 5. Assembly & Setup 6. Basic Operation 7. Using Attachments 8. Emptying the Dust Cup 9. Cleaning & Maintenance 10. Specifications 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Charging dock, Crevice tool, Multi-surface brush, Pet hair removal tool, Washable filter, Dust cup.

FeatureDescription
Powerful SuctionHigh-efficiency motor for strong pickup on various surfaces
Cordless DesignRechargeable lithium-ion battery for up to 20 minutes of runtime
Lightweight & PortableEasy to carry and use for quick cleanups
Washable FilterReusable filter that can be cleaned with water
Pet Hair ToolSpecialized attachment for removing pet hair from upholstery
Multi-Surface BrushBrush roll for carpets and hard floors
Crevice ToolFor tight spaces like between cushions and along edges
LED IndicatorsShows battery status and charging progress
Wall-Mount DockFor convenient storage and charging
One-Button OperationSimple power on/off control

Safety Information

Read all instructions before use to avoid injury or damage.

  1. Use only as described in this manual. Use only manufacturer's recommended attachments.
  2. Do not use to pick up liquids or wet debris.
  3. Do not use outdoors or on wet surfaces.
  4. Do not handle plug or vacuum with wet hands.
  5. Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts.

WARNING! To reduce the risk of fire, electric shock, or injury: Unplug before servicing. Do not use if damaged. Keep battery away from heat and fire.

Parts & Components

Identify all parts before assembly.

  1. Main Vacuum Body: Contains motor, battery, dust cup, and power button.
  2. Charging Dock: Plugs into wall outlet; vacuum sits on dock to charge.
  3. Crevice Tool: Long, narrow attachment for edges and tight spaces.
  4. Multi-Surface Brush: Wide brush with bristles for floors and carpets.
  5. Pet Hair Tool: Upholstery tool with rubberized strips to grab hair.
  6. Washable Filter: Located inside dust cup; captures fine dust.
  7. Dust Cup: Transparent container for collected debris; removable for emptying.

CAUTION! Ensure all parts are securely connected before use.

Charging the Vacuum

Charge fully before first use.

  1. Plug charging dock into a standard 120V AC wall outlet.
  2. Place vacuum onto dock, aligning charging contacts. LED will illuminate.
  3. Initial charge time: Approximately 3.5 hours for full battery.
  4. LED Indicator: Solid red = charging; Solid blue = fully charged; Flashing red = charging error.

Tip: For best performance, charge after each use and store on dock.

Assembly & Setup

Basic Operation

Press power button to start; press again to stop.

For Best Results: Move vacuum slowly over surface. Empty dust cup when full to maintain suction. Use appropriate attachment for the task.

Runtime: Up to 20 minutes on full charge (varies with suction setting and usage). Low Battery: LED will flash blue; recharge as soon as possible.

Using Attachments

Select tool based on cleaning need.

  1. Crevice Tool: Ideal for car interiors, stairs, window sills, and furniture edges.
  2. Multi-Surface Brush: Use on carpets, area rugs, and hard floors like tile or wood.
  3. Pet Hair Tool: Press onto upholstery, cushions, or pet bedding and pull to lift hair.

Tip: For stubborn pet hair, make several passes with the pet hair tool.

Emptying the Dust Cup

Empty after each use to maintain performance.

  1. Turn vacuum off and remove from dock if charging.
  2. Press dust cup release button and pull cup away from body.
  3. Hold over trash can and open bottom latch to empty debris.
  4. Close latch and reattach dust cup until it clicks securely.

WARNING! Do not operate vacuum with full dust cup, as suction will be reduced.

Cleaning & Maintenance

Regular maintenance ensures longevity.

Filter Cleaning (Monthly): Remove filter from dust cup. Rinse under lukewarm water until water runs clear. Let air dry completely for 24 hours before reinstalling.

Cleaning Attachments: Wipe with damp cloth. Ensure all parts are dry before use or storage.

CAUTION! Do not use vacuum without filter. Do not immerse main body in water.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery dead, not docked properlyPlace on charging dock; ensure contacts are clean; charge for 3.5 hours.
Reduced suctionFull dust cup, clogged filter or nozzleEmpty dust cup; clean filter; check nozzle for blockages.
Battery not chargingFaulty outlet, dirty contactsTry different outlet; clean charging contacts on vacuum and dock with dry cloth.
Attachment won't stay onNot fully clicked into placeDetach and reattach, ensuring a firm click.
Vacuum turns off during useOverheating, battery protectionAllow to cool for 30 minutes; recharge battery.

Reset: Remove from dock, press and hold power button for 10 seconds, then recharge.

Service: For support, visit sharkclean.com or call 1-800-798-7398.

Shark WANDVAC POWER PET QV410QGU Vacuum Cleaner Manual © - All Rights Reserved 2025