Shark WANDVAC POWER PET QV410Q Vacuum Cleaner Manual

The Shark WANDVAC POWER PET QV410Q is a lightweight, cordless, handheld vacuum designed for quick cleanups and pet hair removal. It features a powerful motor, a rechargeable lithium-ion battery, a washable filter, a crevice tool, and a motorized pet hair tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Handheld vacuum body, Motorized Pet Hair Tool, Crevice Tool, Charging Dock, Wall Mount, Washable Filter, Lithium-ion Battery.

Assembly & Setup

Unpack and inspect all contents. Ensure all parts are present.

1. Attach the Charging Dock: Plug the power adapter into an outlet, then place the dock on a flat surface or mount it on the wall using included screws.
2. Insert the Filter: Remove the dust cup by pressing the release button. Insert the washable filter into the top of the vacuum body, then reattach the dust cup.
3. Attach Tools: Press the desired tool (Motorized Pet Hair Tool or Crevice Tool) onto the vacuum nozzle until it clicks into place.
4. Place on Charger: Set the vacuum onto the charging dock to begin initial charge.

WARNING! Do not use the vacuum if any parts are damaged. Keep small parts away from children.

First-Time Charging

Fully charge the vacuum before first use.

1. Place the vacuum on the charging dock. Ensure the charging contacts align.
2. The battery indicator LED will flash red while charging.
3. Charging is complete when the LED turns solid green (approximately 3 hours).
4. For optimal battery life, avoid leaving the vacuum on the charger continuously after it is fully charged.

CAUTION! Use only the provided charging dock and power adapter. Do not charge near water or heat sources.

Specifications

• Model: Shark WANDVAC POWER PET QV410Q.
• Type: Cordless Handheld Vacuum.
• Battery: Rechargeable Lithium-ion.
• Charging Time: Approx. 3 hours.
• Runtime: Up to 20 minutes on a full charge (varies with usage).
• Dust Cup Capacity: 0.15 quarts.
• Filter: Washable, reusable fine dust filter.
• Attachments: Motorized Pet Hair Tool, Crevice Tool.
• Weight: 2.5 lbs.
• Power Source: 120V AC, 60Hz charging adapter.

Controls and Settings

Power Button: Press once to turn on; press again to turn off. For continuous use, press and hold the button.

Battery Indicator: Located near the power button. Solid Green = Full charge. Solid Red = Low battery (needs charging). Flashing Red = Charging in progress. Flashing Green = Error or blockage detected.

No additional settings or modes; operation is single-speed for maximum suction power.

Using Attachments

Select the appropriate tool for the cleaning task.

1. Motorized Pet Hair Tool: Ideal for furniture, car interiors, and stairs. The rotating brushroll agitates and lifts stubborn pet hair. Press onto nozzle until it clicks.
2. Crevice Tool: For edges, corners, window tracks, and between furniture cushions. Slide onto nozzle.
3. To switch tools, pull firmly to detach the current tool, then press the new tool into place.

Tip: Turn the vacuum OFF before changing attachments. Clear hair and debris from the brushroll of the pet tool regularly.

Emptying the Dust Cup

Empty the dust cup after each use or when it reaches the MAX fill line.

1. Turn the vacuum OFF.
2. Hold the vacuum over a trash can.
3. Press the Dust Cup Release Button and pull the dust cup away from the body.
4. Open the bottom lid of the dust cup to empty contents.
5. Close the lid and snap the dust cup back onto the vacuum until it clicks.

WARNING! Do not operate the vacuum with a full dust cup, as it reduces suction and can overheat the motor.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

• Filter: Rinse the washable filter with cold water every month. Allow it to air dry completely for 24 hours before reinstalling. Do not operate the vacuum without the filter.
• Motorized Pet Hair Tool: Use scissors to cut away hair wrapped around the brushroll. Wipe the tool with a damp cloth.
• Exterior: Wipe the vacuum body with a dry or slightly damp cloth. Do not immerse in water or use harsh chemicals.
• Check for Blockages: If suction power decreases, check the dust cup, nozzle, and tools for clogs.

CAUTION! Always unplug the charger and ensure the vacuum is OFF before performing any maintenance.

Battery & Power

The lithium-ion battery is not user-replaceable. For battery service, contact Shark Customer Service.

To maximize battery life:

1. Fully charge before first use.
2. Store in a cool, dry place.
3. Avoid completely draining the battery; recharge when the indicator turns red.
4. Do not expose the vacuum or charger to extreme temperatures.

If the vacuum will not be used for an extended period, store it with a 50% charge.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, WANDVAC, and POWER PET are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: If the vacuum behaves erratically, remove it from the charger, hold the power button for 10 seconds, then place it back on the charger.

Service: 1-800-798-7398; sharkclean.com