Shark WANDVAC 2.0 WV270EU Series Vacuum Cleaner Manual

The Shark WANDVAC 2.0 WV270EU Series is a lightweight, cordless, handheld vacuum cleaner designed for quick cleanups. It features a powerful motor, a rechargeable lithium-ion battery, a washable filter, a crevice tool, and a multi-surface brush. It is ideal for cleaning hard floors, carpets, car interiors, upholstery, and stairs. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Parts & Components 4. Charging the Vacuum 5. Assembly & Setup 6. Operating Instructions 7. Emptying the Dust Cup 8. Cleaning & Maintenance 9. Battery & Power 10. Storage 11. Troubleshooting

Features at a Glance

Key components: Main body with motor and battery, Dust Cup, Washable Filter, Crevice Tool, Multi-Surface Brush Tool, Charging Dock, and Power Adapter.

Feature	Description
Power Button	Turns the vacuum on and off
Dust Cup Release Button	Releases the dust cup for emptying
Filter Access Button	Opens the filter compartment
Charging Indicator Light	Shows charging status (red=charging, green=fully charged)
Battery Level Indicator	LED lights show remaining battery power
Crevice Tool	For tight spaces and edges
Multi-Surface Brush Tool	For floors, carpets, and upholstery
Washable Filter	Reusable and easy to clean
Wall-Mount Charging Dock	For convenient storage and charging
Lithium-Ion Battery	Provides cordless runtime up to 30 minutes

Safety Information

Read all instructions before use. Keep the vacuum cleaner away from water and other liquids.

Do not use outdoors or on wet surfaces.
Do not vacuum up flammable or combustible materials.
Do not block the air vents; keep them free of dust and lint.
Unplug the charger when not in use.
Keep hair, loose clothing, fingers, and all parts of body away from openings.

WARNING! To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions.

Parts & Components

Identify all parts before assembly and use.

Main Body: Contains motor, battery, and controls.
Dust Cup: Collects dirt and debris; removable for emptying.
Washable Filter: Located behind the dust cup; traps fine dust.
Crevice Tool: Attaches to the nozzle for narrow spaces.
Multi-Surface Brush Tool: Attaches for cleaning floors and furniture.
Charging Dock & Power Adapter: For recharging the battery.

CAUTION! Do not operate the vacuum if any part is damaged or missing.

Charging the Vacuum

Charge the vacuum fully before first use.

Plug the power adapter into a standard 220-240V AC outlet.
Place the vacuum onto the charging dock, ensuring the contacts align.
The charging indicator will light red. Charging time is approximately 3.5 hours.
When fully charged, the indicator will turn green.

Tip: For best battery life, store the vacuum on the charging dock when not in use.

Assembly & Setup

Assembly is quick and tool-free.

Attach the desired tool: Press the tool onto the vacuum nozzle until it clicks into place.
To remove a tool: Press the tool release button and pull the tool off.
Mount the charging dock: Use the included screws to mount the dock on a wall near an outlet.

Note: Ensure the vacuum is turned off during assembly.

Operating Instructions

To use the vacuum, ensure it is fully charged.

Press the Power Button to turn the vacuum on.
The battery indicator LEDs will illuminate to show remaining power.
Glide the vacuum over the surface to be cleaned. Use back-and-forth motions.
For above-floor cleaning, attach the appropriate tool.
Press the Power Button again to turn the vacuum off.

WARNING! Do not use the vacuum to pick up large, hard, or sharp objects that could damage the unit.

Emptying the Dust Cup

Empty the dust cup after each use or when full.

Turn the vacuum off and remove it from the charging dock if applicable.
Hold the vacuum over a trash bin.
Press the Dust Cup Release Button and pull the dust cup away from the main body.
Open the bottom lid of the dust cup to empty the contents into the bin.
Close the lid and snap the dust cup back onto the main body until it clicks.

CAUTION! Do not operate the vacuum with a full dust cup, as suction will be reduced.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

Filter Cleaning: Remove and rinse the washable filter under tap water every month. Let it air dry for 24 hours completely before reinstalling.
Cleaning the Dust Cup: Wipe the inside of the dust cup with a dry cloth. Do not use water or cleaning agents.
Cleaning the Brush Roll: Remove any hair or fibers wrapped around the brush roll on the multi-surface tool.
Cleaning the Vacuum Exterior: Wipe with a soft, dry cloth.

WARNING! Never use the vacuum without the filter installed, as this can damage the motor.

Battery & Power

The vacuum is powered by a rechargeable lithium-ion battery.

Battery Type: Lithium-Ion
Voltage: 14.4V DC
Charging Time: Approx. 3.5 hours
Run Time: Up to 30 minutes on a full charge (varies with usage)
Charger Input: 100-240V AC, 50/60Hz
Charger Output: 18V DC, 0.5A

Note: The battery is not user-replaceable. For battery service, contact Shark Customer Service.

Storage

Store the vacuum in a cool, dry place.

Fully charge the vacuum before long-term storage.
Empty and clean the dust cup and filter.
Store the vacuum on the wall-mounted charging dock or in its original box.
Keep away from extreme temperatures and direct sunlight.

Tip: Storing on the dock keeps it charged and ready for use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted	Place on charger; ensure contacts are clean and connected.
Reduced suction power	Full dust cup or clogged filter	Empty dust cup; check and clean filter; check hose for blockages.
Battery not charging	Faulty outlet or charger	Try a different outlet; ensure charger is properly connected to dock and vacuum.
Vacuum turns off during use	Overheating or battery protection	Turn off and let cool for 45 minutes; ensure filter is clean and installed.
Unusual noise or vibration	Obstruction in brush or air path	Turn off, check and remove any blockages from nozzle or tools.

Reset: If the vacuum becomes unresponsive, remove it from the charger, press and hold the power button for 10 seconds, then place it back on the charger.

Service: For support, visit www.sharkclean.eu or contact Shark Customer Service in your region.