Shark WANDVAC 2.0 Vacuum Cleaner Manual

The Shark WANDVAC 2.0 is a lightweight, cordless, handheld vacuum cleaner designed for quick cleanups. It features a powerful motor, washable filter, crevice tool, LED headlights, and a wall-mountable charging dock. Powered by a rechargeable lithium-ion battery, it offers multiple suction modes and is ideal for hard floors, carpets, cars, and upholstery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Charging 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning & Maintenance 8. Battery Care 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Charging Dock, Crevice Tool, Washable Filter, LED headlights, Power Button, Suction Mode Button.

FeatureDescription
Power ButtonTurns vacuum on/off; cycles through suction modes
LED HeadlightsIlluminates dark areas for better visibility
Crevice ToolFor tight spaces, corners, and edges
Washable FilterReusable filter; clean every 1-2 months
Charging DockWall-mountable; holds vacuum for charging/storage
Lithium-ion BatteryRechargeable; provides up to 30 minutes runtime
Dust Cup ReleaseButton to empty collected debris
Suction Mode IndicatorLED shows current mode (Eco, Normal, Max)
Wall MountIncludes screws for secure mounting
Charging PortFor direct charging via USB-C cable (optional)

Assembly & Charging

Unpack and inspect contents. Ensure all parts are present.

  1. Charge the vacuum: Place on charging dock or connect USB-C cable. LED indicator will glow red during charging, green when fully charged.
  2. Attach crevice tool: Align and press onto vacuum nozzle until it clicks.
  3. Mount charging dock: Use included screws to mount on wall near outlet.
  4. Install filter: Ensure washable filter is securely placed inside dust cup.

WARNING! Only use provided charger/dock. Do not use if battery is damaged.

First-Time Setup

Fully charge before first use.

  1. Charge: Place vacuum on dock; initial charge takes ~4 hours.
  2. Power on: Press Power Button; LED lights will illuminate.
  3. Select mode: Press Power Button again to cycle through Eco, Normal, Max suction.
  4. Test attachments: Attach crevice tool and practice removing/releasing.
  5. Empty dust cup: Press release button to open and empty after use.

CAUTION! Keep hair, loose clothing, and fingers away from suction inlet.

Specifications

Controls and Settings

Power Button: Turns on/off; cycles suction modes. Suction Mode Indicator: LED color indicates mode (Green: Eco, Blue: Normal, Red: Max).

Operation: Press Power Button to start; press again to change mode; hold for 2 seconds to turn off. LED Headlights: Automatically turn on when vacuum is on. Dust Cup Release: Press button to detach and empty.

Charging Indicator: On dock, LED shows red (charging) or green (fully charged).

Using Attachments

Crevice Tool: For tight spaces, between cushions, car interiors, window tracks.

  1. Ensure vacuum is off.
  2. Align crevice tool with nozzle and push until click.
  3. Turn on vacuum and guide tool into crevices.
  4. To remove, pull firmly away from vacuum.

Tip: For upholstery, use nozzle directly without tool for broader surface cleaning.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use: Press release, empty debris into trash.
  2. Clean filter monthly: Remove filter, rinse under cold water, air dry 24 hours completely before reinserting.
  3. Check for blockages: If suction weakens, inspect nozzle and hose for clogs.
  4. Wipe exterior: Use dry cloth to clean body and charging dock.

WARNING! Do not use vacuum without filter. Ensure filter is completely dry before reuse.

Battery Care

For longest battery life:

CAUTION! Do not attempt to disassemble or replace battery. Contact Shark for battery service.

Care & Storage

Store on charging dock when not in use. Keep away from water and heat sources.

CAUTION! Do not immerse in water. Do not store with dust cup full.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited 2-year warranty. Battery must be recycled or disposed of separately according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery dead/not chargedPlace on charger; ensure dock is powered. Allow to charge fully.
Weak suctionFull dust cup/clogged filterEmpty dust cup; clean filter; check for blockages in nozzle.
Battery not chargingDirty contacts/power issueClean charging contacts on vacuum and dock; try different outlet.
LED lights not workingBattery low/faultRecharge battery; if persists, contact support.
Vacuum turns off unexpectedlyOverheating/battery protectionAllow to cool for 30 minutes; avoid using on Max mode continuously.

Reset: Turn off, remove from charger, wait 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com

Shark WANDVAC 2.0 Vacuum Cleaner Manual © - All Rights Reserved 2025