Shark VX33 Vacuum Cleaner Manual

The Shark VX33 is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, swivel steering, and a large-capacity dust cup. Designed for deep cleaning on both carpets and hard floors, it includes multiple attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean brushroll, Anti-Allergen Complete Seal filtration, LED headlights, swivel steering, large dust cup, crevice tool, dusting brush, upholstery tool.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into handle and lock into place.
3. Attach hose: Connect hose to wand and body ports.
4. Install dust cup: Slide dust cup into place until it locks.
5. Attach tools: Store tools on dock or attach as needed.

WARNING! Ensure all parts are securely connected before use to prevent injury or damage.

First-Time Use

Plug into standard 120V outlet; follow these steps.

1. Power on: Press power switch on body.
2. Select surface: Use brushroll control for carpets (ON) or hard floors (OFF).
3. Adjust height: Handle adjusts automatically for most carpets.
4. Empty dust cup: Press release button to remove and empty when full.
5. Use attachments: Detach wand and attach tools for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark VX33.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Filtration: HEPA filter, washable.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button, wand release.

Body: Dust cup release, hose connection, cord wrap.

Settings: Brushroll on for carpets; off for hard floors. Suction power is automatic. Height adjusts automatically on carpets. LED lights turn on when vacuum is powered.

Using Attachments

For above-floor cleaning: detach wand and attach tools.

1. Detach wand: Press wand release button on handle.
2. Choose tool: Attach crevice tool, dusting brush, or upholstery tool.
3. Connect hose: Ensure hose is securely attached to tool.
4. Clean: Use tool on surfaces; move slowly for best suction.
5. Reattach: Return wand to handle after use.

Tip: Clear hose of obstructions if suction decreases.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty after each use.
2. Clean filters: Remove and rinse HEPA filter every 3 months (air dry completely).
3. Clear brushroll: Remove debris from brushroll monthly.
4. Check hose: Remove obstructions if suction is weak.
5. Inspect cord: Check for damage before each use.

WARNING! Unplug vacuum before maintenance. Do not use wet filters.

Storage & Handling

Store in a dry, cool place. Wrap cord around cord wraps. Attach tools to dock.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com