Shark VERTEX AZ1800 Series Vacuum Cleaner Manual

The Shark VERTEX AZ1800 Series is a powerful corded upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and multiple cleaning modes for carpets and hard floors. It includes various attachments for above-floor cleaning and is designed for whole-home deep cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Anti-Allergen Complete Seal system, LED headlights, large dust cup, wand release, handle controls, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into handle until it locks.
3. Attach hose: Connect hose to wand and body ports.
4. Install accessories: Store crevice tool and dusting brush in holder.
5. Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; turn on power switch.

1. Select surface setting: Use handle switch for carpet or hard floor mode.
2. Adjust suction: Use power setting for high or eco mode.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Use attachments: Release wand for above-floor cleaning with tools.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord away from brushroll.

Specifications

• Model Series: VERTEX AZ1800.
• Power Source: Corded, 120V AC.
• Suction Power: Adjustable with high/eco settings.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 30 feet with automatic rewind.
• Filters: Washable foam and felt filters.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 15.2 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Handle controls: Power ON/OFF, brushroll ON/OFF, suction setting (HIGH/ECO).

Indicator lights: LED for power and brushroll status. Brushroll switch: Turn off for hard floors or delicate rugs. Suction control: Adjust for deep cleaning or energy saving. Cord rewind: Press button to retract cord automatically.

Maintenance indicators: Check filter light when filters need cleaning. Dust cup full indicator: Alerts when dust cup requires emptying.

Using Attachments

Accessories: Crevice tool, dusting brush, upholstery tool.

1. Turn off vacuum and unplug before changing attachments.
2. Remove wand: Press wand release button.
3. Attach tool: Insert tool into wand or hose end.
4. Select suction setting: Use HIGH for deep cleaning, ECO for delicate surfaces.

Tip: Store attachments on vacuum body for easy access.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

1. Carpet mode: Brushroll ON for deep carpet cleaning.
2. Hard floor mode: Brushroll OFF for bare floors.
3. Above-floor mode: Use wand with attachments for furniture, stairs, ceilings.
4. Spot cleaning: Use hose with crevice tool for tight spaces.
5. Edge cleaning: Use vacuum side edges for baseboards and corners.

WARNING! Do not use on wet surfaces. Avoid vacuuming cords or curtains.

Maintenance

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty when full or after each use.
2. Clean filters: Rinse foam and felt filters monthly; air dry 24 hours.
3. Check brushroll: Remove debris from brushroll; replace if worn.
4. Inspect hose: Clear clogs with long object; ensure connections secure.
5. Store properly: Wind cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Care & Storage

Unplug before cleaning. Wipe exterior with damp cloth; dry thoroughly.

CAUTION! Do not immerse in water. Store in cool, dry place away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com