Shark VACMOP VM252 Vacuum Cleaner Manual

The Shark VACMOP VM252 is a 2-in-1 cordless vacuum and mop system designed for hard floors. It features a powerful suction system, a washable microfiber pad, a self-cleaning brush roll, a lightweight design, a rechargeable lithium-ion battery, a LED headlight, a large dirt cup, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Charging the Battery 7. Cleaning Modes & Techniques 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main body with motor and battery, Handle, Washable microfiber pad, Self-cleaning brush roll, Dirt cup, Charging dock, Cleaning solution bottle.

Feature	Description
Power Button	Turns the vacuum on/off; cycles through cleaning modes
LED Headlight	Illuminates dark areas under furniture
Self-Cleaning Brush Roll	Prevents hair wrap and maintains suction
Washable Microfiber Pad	Attaches to base for mopping; machine washable
Large Dirt Cup	Easy-to-empty container for debris
Rechargeable Battery	Lithium-ion battery with charging dock
Cleaning Solution Bottle	Holds Shark Formula cleaning solution
Lightweight Design	Easy to maneuver and carry
2-in-1 Function	Vacuums dry debris and mops hard floors simultaneously
Cordless Operation	Provides unrestricted movement during cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the main body until it clicks into place.
Install the microfiber pad: Align the pad with the base and press until secure.
Fill the solution bottle: Remove the bottle, fill with Shark Formula or water, and reattach.
Charge the battery: Place the vacuum on the charging dock and plug into a wall outlet.

WARNING! Do not use the vacuum without the microfiber pad or dirt cup properly installed. Ensure all parts are securely connected.

First-Time Use

Fully charge the vacuum before first use. Prepare your cleaning area.

Power on: Press the Power Button to turn on the vacuum.
Select mode: Press the Power Button again to cycle through modes (Low, High, Mop).
Begin cleaning: Push the vacuum forward over hard floors; the brush roll and pad will engage.
Empty dirt cup: When full, press the release button to remove and empty the dirt cup.

CAUTION! Use only on hard floors. Do not use on carpets or rugs. Avoid wet pick-up of large debris.

Specifications

Model: Shark VACMOP VM252.
Type: Cordless stick vacuum and mop.
Battery: Rechargeable lithium-ion, 22.2V.
Run Time: Up to 30 minutes per charge (varies by mode).
Charging Time: Approximately 4 hours for full charge.
Dirt Cup Capacity: 0.15 dry quarts.
Weight: 5.5 lbs.
Cleaning Modes: Low (quiet), High (max suction), Mop (vacuum + mopping).
Accessories: Charging dock, extra microfiber pad, cleaning solution bottle.
Warranty: 5-year limited warranty.

Controls and Settings

Power Button: Turns vacuum on/off; cycles through Low, High, and Mop modes. LED Indicators: Battery status (green = charged, red = low, flashing = charging).

Cleaning Modes: Low for quiet cleaning, High for maximum suction on tough debris, Mop for vacuuming and mopping simultaneously. Dirt Cup Release Button: Press to remove dirt cup for emptying. Microfiber Pad Release: Pull lever to detach pad for washing.

Charging the Battery

Use only the provided charging dock and power adapter.

Place the vacuum on the charging dock, ensuring the contacts align.
Plug the power adapter into a standard 120V wall outlet.
The LED indicator will flash red while charging; solid green when fully charged.
Allow up to 4 hours for a full charge from empty.

Tip: Store the vacuum on the charging dock to keep it ready for use. Do not leave the battery depleted for extended periods.

Cleaning Modes & Techniques

Optimize cleaning based on floor condition and debris type.

For daily cleaning: Use Low mode for quick pick-up of dust and small debris.
For heavy debris: Use High mode for larger particles like cereal or pet food.
For sticky spills: Use Mop mode with cleaning solution to vacuum and mop simultaneously.
Under furniture: The LED headlight helps illuminate hidden areas.
Edge cleaning: Use the side of the vacuum to reach along baseboards.
Emptying: Empty the dirt cup after each use or when the full indicator appears.
Pad cleaning: Replace or wash the microfiber pad when it appears soiled.

WARNING! Do not use on wet surfaces or to pick up liquids. Avoid vacuuming sharp objects that could damage the brush roll.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

After Each Use: Empty the dirt cup. Rinse the dirt cup with water and let air dry completely. Check the brush roll for debris or hair wrap; remove if necessary.

Weekly: Remove and machine wash the microfiber pad (cold water, gentle cycle, air dry). Clean the charging contacts with a dry cloth.

Monthly: Inspect the filter; rinse if washable (refer to manual). Check the nozzle and brush roll for blockages.

CAUTION! Unplug the charger before cleaning. Do not submerge the vacuum body in water. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery depleted/not charged	Place on charger for 4 hours; ensure contacts are clean.
Weak suction	Full dirt cup/clogged brush roll	Empty dirt cup; clear debris from brush roll and nozzle.
Battery not charging	Faulty outlet/dock misalignment	Try different outlet; ensure vacuum is properly seated on dock.
Brush roll not spinning	Hair or string wrapped around roll	Turn off vacuum; remove debris from brush roll.
Leaving streaks on floor	Dirty microfiber pad	Replace with clean pad; ensure solution bottle is filled.
Unusual noise	Foreign object in brush roll or airway	Turn off immediately; inspect and remove blockage.

Reset: Turn off vacuum, remove from charger, wait 30 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com