Shark VacMop VM200UKGN Vacuum Cleaner Manual

The Shark VacMop VM200UKGN is a versatile 2-in-1 vacuum and mop system designed for hard floors. It features a powerful vacuum for dry debris, a separate mopping function with a spray system for cleaning solution, a lightweight and cordless design, a rechargeable battery, a washable microfiber pad, and a self-cleaning brush roll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with motor, Dust Cup, Washable Microfiber Mopping Pad, Rechargeable Battery, Charging Dock, Spray Nozzle, Self-Cleaning Brush Roll.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Insert the handle: Align the handle with the main body until it clicks into place.
2. Attach the dust cup: Ensure it is securely locked onto the main unit.
3. Install the battery: Slide the battery into the compartment until it clicks.
4. Attach the mopping pad: Align the pad with the cleaning head and press to secure.
5. Place on charging dock: Connect the dock to power and place the VacMop on it to charge fully.

WARNING! Ensure the unit is powered off during assembly. Do not force components.

First-Time Use

Fully charge the battery before first use. Prepare the mopping solution.

1. Charge: Place on dock until indicator shows full charge (approx. 4 hours).
2. Fill the solution tank: Use only Shark-approved hard floor cleaning solution with water.
3. Select mode: Use the mode switch to select VACUUM ONLY or VAC+MOP.
4. Begin cleaning: Press the power trigger to start vacuuming. Press the spray trigger intermittently to mop.
5. Empty dust cup: Press release button to empty after use.

CAUTION! Do not use on rugs or carpets in mopping mode. For hard floors only.

Specifications

• Model: Shark VacMop VM200UKGN.
• Type: Cordless, rechargeable 2-in-1 vacuum and mop.
• Battery: Lithium-ion, rechargeable.
• Run Time: Up to 30 minutes (varies by mode).
• Charging Time: Approximately 4 hours.
• Dust Cup Capacity: 0.4 litres.
• Solution Tank Capacity: 380 ml.
• Weight: 2.8 kg.
• Noise Level: < 80 dB.
• Power Source: 100-240V AC, 50/60Hz charging dock.

Controls and Functions

Main unit controls: Power Trigger, Spray Trigger, Mode Switch (VACUUM / VAC+MOP), Battery Indicator LED, Dust Cup Release Button.

Indicators: Battery LED (green=charged, red=charging/low), Brush Roll Alert.

Cleaning Head: Self-cleaning brush roll, LED headlights, Mopping pad attachment clips. Charging Dock: Power connector, charging contacts. Maintenance: Washable filters (pre-motor, post-motor), washable mopping pad, cleanable brush roll.

Vacuuming & Mopping Modes

Two primary modes: Vacuum Only (dry debris), Vac+Mop (simultaneous vacuum and spray mopping).

1. Vacuum Only: Switch to VACUUM. Press power trigger. Use for dry pick-up on hard floors.
2. Vac+Mop: Switch to VAC+MOP. Press power trigger to vacuum. Intermittently press spray trigger to apply solution.
3. Spot Cleaning: For concentrated areas, use short bursts of spray.
4. After Mopping: Let floor air dry. Remove and wash mopping pad.

Tip: For best results, vacuum first in VACUUM mode to remove large debris before mopping.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use. Do not overfill.
2. Clean filters: Rinse pre-motor and post-motor filters monthly under tap water. Air dry for 24 hours.
3. Clean brush roll: Remove hair and debris from brush roll regularly.
4. Wash mopping pad: Remove and machine wash in warm water. Air dry.
5. Clean solution tank: Rinse with clean water after each use.
6. Wipe exterior: Use a dry cloth.

WARNING! Do not use the unit with wet filters. Ensure all parts are completely dry before reassembly.

Battery & Charging

Use only the provided charging dock.

1. Charging: Place VacMop on dock. Red LED indicates charging. Green LED indicates full charge.
2. Run Time: Up to 30 minutes. Runtime decreases in VAC+MOP mode with frequent spraying.
3. Battery Care: For storage, charge fully and store in a cool, dry place.
4. Battery Replacement: The battery is not user-serviceable. Contact Shark for replacement.

CAUTION! Do not use damaged batteries or chargers. Do not expose battery to fire or extreme heat.

Care & Storage

Store unit on the charging dock in a dry area.

1. Empty and clean all parts before storage.
2. Ensure the mopping pad is removed, washed, and dry.
3. Store with battery fully charged.
4. Keep away from direct sunlight and extreme temperatures.

CAUTION! Do not store with solution in the tank. Always detach and wash the mopping pad after use.

Regulatory Information

This appliance complies with relevant EU directives and UK regulations. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. The crossed-out wheelie bin symbol indicates separate collection for electrical and electronic equipment. For more information, contact your local authority. SharkNinja Operating LLC. Copyright © SharkNinja. For support, visit sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Reset: Turn unit off, remove battery for 60 seconds, reinsert.

Service: 0800 862 0453; sharkclean.co.uk