Shark VacMop VM200UK Series Vacuum Cleaner Manual

The Shark VacMop VM200UK Series is a versatile 2-in-1 cordless vacuum and mop system designed for hard floors. It features a powerful motor for vacuuming debris, a built-in mopping function with a washable microfiber pad, a lightweight and maneuverable design, a removable battery for extended cleaning, a self-cleaning brush roll, and multiple attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Using the Vacuum & Mop 7. Cleaning Modes & Attachments 8. Maintenance & Care 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Removable battery, Washable microfiber mopping pad, Self-cleaning brush roll, Charging dock, Crevice tool, Dusting brush.

Feature	Description
2-in-1 Function	Vacuum and mop hard floors simultaneously
Cordless Design	Powered by removable lithium-ion battery
Self-Cleaning Brush Roll	Prevents hair wrap for maintenance-free cleaning
Washable Microfiber Pad	Reusable pad for mopping; attaches magnetically
Lightweight Body	Easy to carry and maneuver around furniture
Multiple Attachments	Crevice tool and dusting brush for detailed cleaning
Charging Dock	Stores and charges the vacuum conveniently
LED Indicators	Displays battery status and cleaning mode
POWER Button	Turns vacuum on/off; toggles between vacuum and mop modes
Battery Release	Button to remove battery for charging or replacement

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Insert the battery: Align battery with slot on vacuum body, push until it clicks.
Attach the mopping pad: Place clean, damp microfiber pad onto the magnetic plate at the base.
Charge the battery: Place vacuum on charging dock or plug charger directly into battery port.
Install attachments: Crevice tool and dusting brush store on dock or attach to vacuum as needed.

WARNING! Ensure battery is fully charged before first use. Do not use with wet mopping pad on carpets.

First-Time Use

Fully charge battery, then prepare for cleaning.

Charge: Place on dock until LED shows solid green (approx. 4 hours).
Wet mopping pad: Dampen (do not soak) microfiber pad with water or approved cleaning solution.
Select mode: Press POWER to turn on; press again to switch between vacuum-only and vacuum+mop modes.
Begin cleaning: Glide over hard floors; the vacuum will pick up debris while the pad mops.

CAUTION! Use only on hard floors. Avoid carpets, area rugs, and wet surfaces beyond damp mopping.

Specifications

Type: Cordless stick vacuum with mopping function.
Power Source: Removable lithium-ion battery (included).
Run Time: Up to 30 minutes per charge (varies by mode).
Charging Time: Approximately 4 hours to full.
Dust Capacity: 0.4L empty-able bin.
Mopping Pad: Washable, reusable microfiber.
Attachments: Crevice tool, dusting brush.
Weight: 2.5 kg (without battery).
Compatible Surfaces: Hardwood, tile, laminate, vinyl.

Controls and Functions

Main controls located on handle. LED display shows battery level and mode.

Buttons: POWER (On/Off, mode toggle), Battery Release.

Modes: Vacuum only (suction), Vacuum + Mop (suction with damp mopping). Indicators: LED shows green (full charge), amber (medium), red (low), flashing red (needs charge). Maintenance: Empty bin after each use; clean filter regularly; wash mopping pad after use.

Using the Vacuum & Mop

For optimal cleaning on hard floors.

Ensure battery is charged and mopping pad is damp.
Press POWER to turn on; select desired mode with second press.
Glide forward and backward slowly; allow vacuum to pick up debris and pad to scrub.
For stubborn spots, pause over area for a few seconds.
After use, turn off, empty bin, and remove mopping pad for washing.

Tip: Do not oversaturate mopping pad; excess water can damage floors or vacuum.

Cleaning Modes & Attachments

Use attachments for detailed cleaning.

Crevice tool: Attach to hose for tight spaces (corners, between cushions).
Dusting brush: Use for delicate surfaces (blinds, shelves, keyboards).
Vacuum-only mode: For dry debris without mopping (e.g., area rugs).
Vacuum+Mop mode: For combined cleaning on hard floors.
Self-cleaning brush roll: Automatically removes hair; no manual cutting required.

WARNING! Do not use attachments with wet mopping pad attached. Remove pad first.

Maintenance & Care

Regular maintenance ensures performance and longevity.

Empty dust bin after each use; press release button to remove.
Clean filter: Rinse under water every month; air dry completely before reinserting.
Wash mopping pad: Hand wash with mild detergent; air dry before reuse.
Check brush roll: Remove debris if needed; it self-cleans but inspect occasionally.
Wipe exterior: Use dry cloth to clean vacuum body.

CAUTION! Do not immerse vacuum in water. Ensure all parts are dry before reassembly.

Battery & Charging

Lithium-ion battery; recharge when low.

Charging: Place vacuum on dock or plug charger into battery port.
LED indicators: Solid green = fully charged; flashing red = charging; red = low.
Run time: Up to 30 minutes; less in Vacuum+Mop mode.
Battery removal: Press release button to swap batteries (optional extra).
Storage: Store in cool, dry place; charge at least every 6 months if not used.

WARNING! Use only Shark-approved charger and battery. Do not expose to extreme temperatures.

Regulatory Information

Complies with UK and EU safety standards. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery dead/not installed	Charge battery; ensure properly inserted.
Weak suction	Full dust bin/clogged filter	Empty bin; clean filter; check for blockages.
Mopping pad not picking up liquid	Pad too dry or worn	Dampen pad evenly; replace if worn out.
Brush roll not spinning	Hair/debris tangled	Turn off, remove debris; self-clean function may need reset.
Battery not charging	Faulty dock/charger	Check connections; try different outlet; contact support.

Reset: Remove battery for 10 seconds, then reinsert.

Service: 0800 862 0453; www.sharkclean.co.uk