Shark VACMOP AI ROBOT Vacuum Cleaner Manual

The Shark VACMOP AI ROBOT is an intelligent vacuum and mop hybrid cleaning robot featuring AI-powered navigation, multi-surface cleaning capabilities, self-emptying base, smart mapping, voice control compatibility, and app-based controls. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to App & Wi-Fi 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: AI Navigation Sensor, Self-Emptying Base, Vacuum & Mop Module, Charging Dock, Remote Control, HEPA Filter, Side Brushes.

Feature	Description
AI Navigation	Smart mapping and obstacle avoidance
Self-Emptying Base	Automatically empties dustbin into base
Vacuum & Mop Combo	Simultaneously vacuums and mops hard floors
Smart Mapping	Creates floor plan via app for room-specific cleaning
Voice Control	Works with Alexa and Google Assistant
App Control	Schedule and control via SharkClean app
Auto-Recharge	Returns to dock when battery low
HEPA Filtration	Traps 99.9% of dust and allergens
Multi-Surface Brushes	Adjusts for carpets and hard floors
Boundary Strips	Virtual no-go zones via magnetic strips

Installation & Setup

Unpack and inspect contents. Place on level surface.

Install Self-Emptying Base: Place against wall with 3 feet clearance on each side.
Charge Robot: Connect base to power outlet, place robot on charging contacts.
Install Side Brushes: Attach left and right brushes until they click.
Install Filter & Dustbin: Insert HEPA filter into dustbin, place in robot.
Attach Mop Pad: For mopping, attach reusable pad to mopping module.

WARNING! Keep base away from stairs and high-traffic areas. Ensure charging contacts are clean.

First-Time Use

Power on robot; follow setup prompts.

Initial Charge: Allow robot to charge fully (approx. 4 hours).
Clear Area: Remove loose wires and small objects from floor.
Start Mapping: Press CLEAN button; robot will explore and map your home.
Connect to App: Download SharkClean app, follow in-app pairing steps.
Set Preferences: Configure cleaning modes, schedules, and no-go zones.

CAUTION! Do not pick up robot during mapping. Ensure cliff sensors are clean.

Specifications

Model: Shark VACMOP AI ROBOT
Navigation: AI Laser Navigation with obstacle detection
Battery: Lithium-ion, 90-minute runtime, auto-recharge
Dustbin Capacity: 0.5L (robot), 1.5L (base)
Suction Power: Adjustable (Eco, Normal, Max)
Mopping: Electronic water control, reusable pads
Connectivity: Wi-Fi 2.4GHz, Bluetooth
Compatibility: iOS 11+, Android 7+, Alexa, Google Assistant
Power Source: 100-240V AC, 50/60Hz
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access controls via physical buttons, remote, or app. Robot Buttons: POWER, CLEAN, SPOT, HOME.

Remote: POWER, CLEAN, SPOT, HOME, SCHEDULE, MODE (Eco/Normal/Max), MAP.

App Settings: Cleaning schedules, room selection, suction power, water flow, virtual boundaries, cleaning history. Voice Commands: "Alexa, ask Shark to start cleaning" or "Hey Google, tell Shark to go home."

Connecting to App & Wi-Fi

Requires 2.4GHz Wi-Fi network.

Download SharkClean app from App Store or Google Play.
Create account or log in.
Press and hold HOME and SPOT buttons for 3 seconds until Wi-Fi light flashes.
Follow in-app instructions to connect robot to your network.
Name your robot and set up features.

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for customized cleaning.

Auto Clean: Robot cleans entire mapped area.
Room Select: Clean specific rooms via app.
Spot Clean: Intensive clean of 3x3 foot area.
Edge Clean: Focus on walls and corners.
Mopping Mode: Vacuum and mop simultaneously (hard floors only).
Schedule: Set daily/weekly cleaning via app.
Manual Control: Drive robot remotely via app.

WARNING! Remove mop pad before vacuuming carpets. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dustbin: After each cleaning cycle.
Clean Filter: Tap HEPA filter monthly; replace every 6-12 months.
Clean Brushes: Remove hair and debris from main brush weekly.
Clean Sensors: Wipe cliff and navigation sensors with dry cloth.
Clean Charging Contacts: On robot and base monthly.
Wash Mop Pad: Hand wash reusable pad after use; air dry.
Check Side Brushes: Replace if bent or damaged.

CAUTION! Unplug base before maintenance. Do not immerse robot in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © 2025 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure power outlet works.
Poor navigation	Dirty sensors/obstacles	Clean sensors; clear floor clutter.
App not connecting	Wi-Fi issues	Restart robot/router; ensure 2.4GHz network.
Weak suction	Full dustbin/clogged filter	Empty dustbin; clean or replace filter.
Not mopping	Dry pad/empty tank	Wet mop pad; ensure water tank is filled.
Not returning to base	Blocked path/low light	Clear path to base; ensure area is well lit.
Error beeps	Wheel stuck/brush tangled	Check for obstructions; clean brushes and wheels.

Reset: Hold HOME and SPOT for 10 seconds to reset Wi-Fi.

Service: 1-800-798-7398; www.sharkclean.com/support