Shark VAC-THEN-STEAM MV2010 Vacuum Cleaner Manual

The Shark VAC-THEN-STEAM MV2010 is a versatile 2-in-1 vacuum and steam mop system designed for hard floors and area rugs. It features a detachable steam mop pod, dual tank technology (clean water/dirty water), variable steam settings, a swivel steering head, LED headlights, washable microfiber pads, and a HEPA filtration system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Vacuum & Steam Modes 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, detachable steam mop pod, clean water tank, dirty water tank, swivel head, LED headlights, washable pads, HEPA filter, power cord, and accessories.

Feature	Description
2-in-1 System	Vacuum first, then steam mop in one pass
Dual Tank Technology	Separate clean water and dirty water tanks to avoid cross-contamination
Variable Steam Control	Adjustable steam settings for different floor types
Swivel Steering Head	Maneuvers easily around furniture and obstacles
LED Headlights	Illuminates hidden dirt and debris
Washable Microfiber Pads	Reusable pads for effective cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
Detachable Pod	Easy removal of steam mop unit for handheld use
Power Cord	Long cord for extended reach
Accessory Storage	On-board storage for extra pads and tools

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat, stable surface.

Attach handle: Insert handle into main body until it clicks securely.
Install clean water tank: Fill with distilled water, then snap into place on the pod.
Attach steam mop pod: Align pod with vacuum body and press until locked.
Attach microfiber pad: Place pad onto the bottom of the steam mop pod, ensuring full coverage.
Plug into power outlet: Ensure outlet is grounded and voltage matches unit requirements.

WARNING! Do not use tap water; use distilled water only to prevent mineral buildup. Ensure all parts are securely connected before use.

First-Time Use

Before first use, perform a test run in an inconspicuous area to ensure proper operation.

Fill clean water tank: Use distilled water only, do not overfill.
Power on: Press the power button; the unit will beep and lights will illuminate.
Select mode: Choose VACUUM ONLY or VAC-THEN-STEAM using the mode button.
Adjust steam setting: Use the steam control dial to select low, medium, or high steam.
Begin cleaning: Push unit forward to vacuum; pull back to release steam (in steam mode).

CAUTION! Allow unit to heat up for 30 seconds before steaming. Keep cord away from steaming area to prevent damage.

Specifications

Model: Shark VAC-THEN-STEAM MV2010
Power Source: 120V AC, 60Hz
Cord Length: 25 feet
Water Tank Capacity: Clean tank: 24 oz; Dirty tank: 20 oz
Steam Settings: Low, Medium, High
Heat-up Time: Approx. 30 seconds
Filtration: HEPA filter, washable
Pads: 2 washable microfiber pads included
Weight: 12 lbs
Warranty: 5-year limited warranty

Controls and Settings

Main controls located on handle: POWER button, MODE selector (Vacuum/Steam Combo), STEAM CONTROL dial, and RESET button.

Indicator Lights: Power ON (green), Ready to Steam (blue), Low Water (red), Overheat (flashing red).

Vacuum Settings: Suction power automatically adjusts for floor type. Steam Settings: Low for sealed hardwoods, Medium for tile, High for grout and tough stains. Mode Selection: VACUUM ONLY for dry debris; VAC-THEN-STEAM for combined cleaning.

Vacuum & Steam Modes

For optimal cleaning, vacuum first to remove loose debris, then steam to sanitize.

Vacuum Mode: Power on, select VACUUM ONLY. Push forward to pick up dirt, dust, and debris.
Vac-Then-Steam Mode: Select VAC-THEN-STEAM. Unit will vacuum as you push forward, then release steam as you pull back.
Steam-Only (Handheld): Detach pod by pressing release button. Use as a handheld steamer for spot cleaning.
Adjusting Steam: Turn dial to desired setting; higher settings produce more steam for tougher jobs.
Using on Rugs: For area rugs, use VACUUM ONLY mode. Do not use steam on rugs unless labeled as safe.

Tip: Work in sections, allowing floor to dry before walking on it. Overlap strokes for complete coverage.

Maintenance & Cleaning

Regular maintenance ensures peak performance and longevity.

After each use: Empty dirty water tank, rinse with clean water, and let air dry.
Clean microfiber pads: Remove and wash in warm water with mild detergent. Air dry completely.
Clean HEPA filter: Remove filter every 3 months, tap out debris, or rinse under cold water. Air dry for 24 hours before reinstalling.
Descale: If using hard water, descale monthly with vinegar solution (follow instructions in manual).
Check for blockages: Inspect vacuum hose and steam nozzles for clogs; clear with provided tool.

WARNING! Unplug unit before performing any maintenance. Do not immerse in water.

Storage & Care

Store in a cool, dry place away from direct sunlight.

Empty both tanks completely before storage.
Remove microfiber pad and wash; store separately.
Wrap cord around cord hooks on back of unit.
Store upright to prevent damage to components.

CAUTION! Do not store with water in tanks to prevent mold and mineral buildup.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398. This appliance is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No steam produced	Empty clean water tank, clogged nozzle	Fill tank with distilled water; clean nozzle with pin tool.
Low suction power	Full dust cup, clogged filter/hose	Empty dust cup; clean filter; check hose for blockages.
Unit won't power on	Not plugged in, tripped GFCI outlet	Check power connection; reset GFCI outlet.
Leaking water	Overfilled tank, loose connection	Do not fill past MAX line; ensure tank is locked in place.
Steam mop pad not picking up dirt	Dirty pad, incorrect setting	Replace or wash pad; use higher steam setting for tough stains.
Unusual noise	Debris in fan or brush roll	Turn off and unplug; remove debris from brush roll and fan area.

Reset: If unit overheats, unplug and allow to cool for 30 minutes. Press RESET button.

Service: 1-800-798-7398; www.sharkclean.com