Shark VAC-OR-STEAM MV3010 Vacuum Cleaner Manual

The Shark VAC-OR-STEAM MV3010 is a versatile 2-in-1 vacuum and steam mop system designed for hard floors and low-pile carpets. It features a powerful suction motor, a removable steam mop pod with adjustable steam settings, a large-capacity dust cup, washable microfiber pads, a crevice tool, and a multi-surface brush. The unit is lightweight, corded, and includes safety features like automatic shut-off. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Vacuuming Operation 7. Steam Mopping Operation 8. Maintenance & Cleaning 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Steam mop pod attachment, Dust cup with filter, Handle with controls, Power cord, Crevice tool, Multi-surface brush, Washable microfiber pads.

Feature	Description
2-in-1 Function	Switch between vacuuming and steam mopping
Powerful Suction	For effective debris pickup on hard floors and carpets
Adjustable Steam	Low/High steam settings for different cleaning needs
Large Dust Cup	Easy-to-empty, washable container
Washable Pads	Reusable microfiber pads for steam mopping
Crevice Tool	For tight spaces and edges
Multi-Surface Brush	For delicate floors and area rugs
Automatic Shut-Off	Safety feature when unit is upright or overheats
Lightweight Design	Easy to maneuver and carry
Corded Power	Provides consistent power during use

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the main body until it clicks securely.
Install the dust cup: Align and push the dust cup into the vacuum body until it locks.
Attach cleaning tools: The crevice tool and brush can be stored on the dock or handle.
Attach steam mop pod (for steam mode): Align the pod with the vacuum head and press until it clicks into place.
Attach microfiber pad: Stretch the pad over the bottom of the steam mop pod.
Plug into a standard 120V AC outlet.

WARNING! Ensure the unit is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, perform a quick test to ensure all functions work properly.

Vacuum Mode: Ensure the steam mop pod is NOT attached. Turn the power switch ON. Test suction on a hard floor.
Steam Mode: Attach the steam mop pod and a clean microfiber pad. Fill the water tank with distilled water. Plug in and turn the steam function ON. Allow 30 seconds for steam to generate. Test on a small, inconspicuous area.
Adjust settings: Use the controls on the handle to select vacuum power or steam level (Low/High).
Practice maneuvering: Get a feel for the unit's weight and cord management.

CAUTION! Never use cleaning solutions, vinegar, or scented oils in the water tank. Use distilled water only to prevent mineral buildup.

Specifications

Model: Shark VAC-OR-STEAM MV3010.
Functions: Vacuum and Steam Mop.
Power Source: Corded, 120V AC, 60Hz.
Suction Power: Adjustable via power switch.
Steam Settings: Low and High steam output.
Water Tank Capacity: Approx. 12 oz.
Dust Cup Capacity: Approx. 0.5 dry quarts.
Cord Length: 25 feet.
Weight: Approx. 10 lbs.
Filtration: Washable foam and felt filter.
Warranty: Limited 5-year warranty (see manual for details).

Controls and Settings

Main controls are located on the handle for easy access during use.

Handle Controls: Main Power Switch (Vacuum On/Off), Steam Selector Button (Steam On/Off), Steam Level Button (Low/High).

Vacuum Mode: Use the main power switch. The unit provides constant suction. Steam Mode: Press the Steam Selector button to activate steam. Press the Steam Level button to toggle between Low (for light cleaning/delicate floors) and High (for tougher grime/sealed floors). The unit must be plugged in and upright to generate steam. The ready light will indicate when steam is available.

Vacuuming Operation

For best results on hard floors, area rugs, and low-pile carpets.

Ensure the steam mop pod is NOT attached.

Plug the power cord into an outlet.

Flip the main power switch ON.

Begin vacuuming in a systematic pattern, overlapping strokes.

For edges and corners, use the crevice tool attachment.

For delicate area rugs, use the multi-surface brush attachment.

When finished, turn the power switch OFF and unplug the unit.

Empty the dust cup and clean the filter as needed.

Tip: Do not vacuum up large objects, liquids, or hot ashes, as this can damage the unit.

Steam Mopping Operation

For sanitizing and cleaning sealed hard floors like tile, laminate, and sealed hardwood.

Attach the steam mop pod and a clean, damp microfiber pad.

Fill the water tank with distilled water. Do not overfill.

Plug the unit into an outlet. The unit must be in the upright position.

Press the Steam Selector button to ON. The ready light will blink and then stay solid when steam is ready (approx. 30 seconds).

Select your desired steam level (Low or High).

Tilt the handle to release steam and begin mopping in a forward-and-back motion.

For tough spots, hold the mop in place for a few seconds to allow steam to penetrate.

When finished, return the unit to the upright position. Press the Steam Selector button to OFF and unplug.

Allow the mop to cool completely before removing the pad.

WARNING! Steam is hot. Do not direct steam at people, pets, or unsealed surfaces. Never leave the unit unattended while plugged in and in steam mode.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

After Each Use: Empty the dust cup. Rinse the microfiber pad(s) in warm water (machine washable).

Weekly/Monthly: Wash the dust cup, foam filter, and felt filter with warm water. Allow all parts to air dry completely for 24 hours before reassembling.

Descaling: Mineral buildup can occur. Use only distilled water to minimize this. If performance declines, consult the manual for descaling instructions.

Exterior: Wipe the main body and handle with a damp cloth. Do not immerse in water.

Pad Replacement: Replace microfiber pads when they become worn or stained.

CAUTION! Always unplug the unit and allow it to cool completely before performing any maintenance. Never reassemble parts while wet.

Safety Information

To reduce the risk of fire, electric shock, or injury:

Read all instructions before using.

Use only as described in this manual.

Do not use outdoors or on wet surfaces.

Do not allow to be used as a toy.

Do not use with damaged cord or plug.

Do not pull or carry by cord, use cord as a handle, or close a door on cord.

Do not put any object into openings. Do not use with any opening blocked.

Keep hair, loose clothing, fingers, and all parts of body away from openings.

Turn off all controls before unplugging.

Connect to a properly grounded outlet only.

Do not use without dust cup and/or filters in place.

Use extra care when cleaning on stairs.

For steam function: Burns can occur from touching hot parts. Do not use on unsealed wood or unglazed ceramic floors.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. SHARK and VAC-OR-STEAM are trademarks of SharkNinja Operating LLC. For customer service and product information, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Unit won't turn on Not plugged in; faulty outlet Check power cord connection; try a different outlet.

Loss of suction Full dust cup; clogged filter or hose Empty dust cup; wash filters; check hose for blockages.

No steam produced Empty water tank; unit not upright; mineral buildup Fill tank with distilled water; ensure unit is upright for 30 sec; descale if needed.

Steam is weak Low steam setting; clogged steam vents; cold pad Select High setting; clean steam vents on pod; dampen pad before use.

Leaving excess water Pad is oversaturated; steam level too high for floor Wring out pad thoroughly; use Low steam setting for sensitive floors.

Unusual noise Object stuck in brush roll or hose Turn off and unplug. Inspect brush roll, hose, and intake for obstructions.

Reset: Unplug the unit for 2 minutes to reset the thermal protector if it has overheated.

Service: For repairs not covered in this guide, contact SharkNinja Customer Service at 1-800-798-7398 or sharkclean.com.

Shark VAC-OR-STEAM MV3010 Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Not plugged in; faulty outlet	Check power cord connection; try a different outlet.
Loss of suction	Full dust cup; clogged filter or hose	Empty dust cup; wash filters; check hose for blockages.
No steam produced	Empty water tank; unit not upright; mineral buildup	Fill tank with distilled water; ensure unit is upright for 30 sec; descale if needed.
Steam is weak	Low steam setting; clogged steam vents; cold pad	Select High setting; clean steam vents on pod; dampen pad before use.
Leaving excess water	Pad is oversaturated; steam level too high for floor	Wring out pad thoroughly; use Low steam setting for sensitive floors.
Unusual noise	Object stuck in brush roll or hose	Turn off and unplug. Inspect brush roll, hose, and intake for obstructions.