Shark VAC-OR-STEAM MV3010 40 Vacuum Cleaner Manual

The Shark VAC-OR-STEAM MV3010 40 is a versatile 2-in-1 vacuum and steam mop system designed for hard floors and low-pile carpets. It features a powerful suction motor, a large-capacity dust cup, a steam-ready mop pad attachment, multiple cleaning modes, HEPA filtration, a telescopic wand, various nozzle attachments, and a rechargeable battery system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum unit, Telescopic wand, Motorized floor nozzle, Crevice tool, Upholstery brush, Steam mop pad attachment, Dust cup with HEPA filter, Charging dock.

Assembly Instructions

Unpack all parts and inspect for damage. Assemble on a clean, flat surface.

1. Attach the telescopic wand: Insert into the main body until it clicks.
2. Connect the floor nozzle: Align with wand end and push until secure.
3. Install the dust cup: Slide into the back of the unit until it locks.
4. Insert the HEPA filter: Place into the filter compartment behind the dust cup.
5. Attach the steam mop pad: Clip onto the bottom of the floor nozzle when needed.
6. Place the unit on the charging dock to ensure full battery for first use.

WARNING! Ensure all parts are securely connected before operation. Do not force connections.

First-Time Setup

Fully charge the vacuum before first use.

1. Charging: Place the vacuum on the charging dock; LED indicator will glow red, turning green when fully charged (approx. 4 hours).
2. Power On: Press the power button on the handle to start vacuuming.
3. Mode Selection: Use the mode button to switch between Eco (quiet, longer runtime) and Max (maximum suction).
4. Steam Function: For steam mopping, attach the pad, fill the water tank with distilled water, and press the steam trigger.
5. Test on a small area first to ensure proper operation.

CAUTION! Use only distilled water in the steam tank to prevent mineral buildup. Do not use on unsealed wood or sensitive surfaces.

Specifications

• Model: Shark VAC-OR-STEAM MV3010 40
• Type: Cordless Stick Vacuum & Steam Mop
• Dust Cup Capacity: 0.8 Liters
• Battery: Lithium-ion, 40V
• Runtime: Up to 40 minutes (Eco mode)
• Charging Time: 4 hours
• Filtration: HEPA filter, washable
• Suction Power: Adjustable (Eco/Max)
• Steam Output: Adjustable steam control
• Water Tank Capacity: 300ml
• Warranty: 5-year limited warranty

Controls and Settings

Main controls located on the handle and body.

Handle Controls: Power button, Mode button (Eco/Max), Steam trigger (when attached).

Indicator Lights: Battery status (green=full, red=charging/low), Mode indicator, Filter alert.

Settings & Adjustments: Suction power (Eco for hard floors, Max for carpets), Steam level (Low/High), Brush roll on/off (for delicate rugs), Wand length adjustment.

Maintenance Alerts: LED flashes when dust cup is full, filter needs cleaning, or battery is critically low.

Using Vacuum & Steam Mop Functions

Vacuuming: For carpets and hard floors. Steam Mopping: For sanitizing hard floors only.

1. Vacuuming: Ensure brush roll is engaged. Glide over surfaces; use back-and-forth motions.
2. Above-Floor Cleaning: Detach wand, attach crevice tool or brush for furniture, vents, etc.
3. Steam Mopping: Attach steam pad, fill tank, wait 30 seconds for steam to generate. Mop slowly in straight lines.
4. Switching Functions: Turn off vacuum, detach floor nozzle, attach steam mop pad (or vice versa).
5. Emptying Dust Cup: Press release button, empty into trash, reinsert until click.

Tip: For best steam results, vacuum the area first to remove loose debris.

Cleaning Modes & Attachments

Use the right attachment for each cleaning task.

1. Motorized Floor Nozzle: For carpets and hard floors; auto-adjusts height.
2. Crevice Tool: For tight spaces, corners, between cushions.
3. Upholstery Brush: For sofas, curtains, car interiors.
4. Dusting Brush: For shelves, blinds, delicate surfaces.
5. Steam Mop Pad: Microfiber pad for sanitizing; machine washable.
6. Under-Appliance Wand: Extends to clean under furniture (optional accessory).

WARNING! Do not use the steam mop attachment on carpets, rugs, or unsealed floors. Use only attachments provided by Shark.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty Dust Cup: After each use or when full indicator lights.
2. Clean Filters: Rinse HEPA filter under cold water every month; air dry for 24 hours before reinstalling.
3. Check Brush Roll: Remove hair and debris wrapped around the brush roll monthly.
4. Clean Steam Mop Pad: Machine wash in warm water; air dry.
5. Clean Water Tank: Empty after each use; rinse with distilled water weekly.
6. Battery Care: Store in a cool, dry place; avoid complete discharge.
7. Exterior Cleaning: Wipe with a damp cloth; do not immerse in water.

CAUTION! Unplug charger and ensure vacuum is off before maintenance. Do not use detergents on filters.

Regulatory Information

FCC Part 15 Compliance: This device complies with Class B digital device limits. ICES-003 (Canada): Complies with Canadian ICES-003 standards. Warranty: 5-year limited warranty from date of purchase. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product incorporates safety features including thermal cutoff and automatic shutoff.

Troubleshooting

Reset: For electronic issues, remove battery for 60 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com