Shark V3700UK Vacuum Cleaner Manual

The Shark V3700UK is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Hair Wrap brushroll, LED headlights, and a large-capacity dust cup. It offers multiple cleaning modes for carpets and hard floors, a detachable pod for portable cleaning, and a range of specialized attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean floorhead, detachable pod, wand, hose, and accessory set.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for carpets and hard floors
Anti-Hair Wrap Brushroll	Prevents hair tangles on the brushroll
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, 0.8L capacity
Detachable Pod	Converts to a portable vacuum for above-floor cleaning
Multi-Surface Settings	Adjustable for carpets, hard floors, and delicate rugs
Accessory Storage	Built-in caddy for crevice tool, dusting brush, and upholstery tool
Power Cord	7.5m length for extended reach
Washable Filters	Foam and felt filters for easy maintenance
On-Board Tools	Tools store on vacuum for quick access

Assembly & Setup

Unpack and inspect all components. Assemble following these steps.

Attach wand: Insert wand into vacuum body until it clicks into place.
Connect hose: Attach hose to wand and vacuum body ports.
Install floorhead: Align floorhead with vacuum body and push until it clicks.
Attach accessories: Store tools in built-in caddy.
Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Ensure foam and felt filters are in place inside dust cup.
Select surface setting: Turn dial on floorhead to match floor type (Carpet/Hard Floor).
Power on: Press foot pedal to turn on vacuum.
Adjust suction: Use suction control slider on handle for different surfaces.
Test attachments: Try crevice tool and dusting brush for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark V3700UK.
Power: 700W motor.
Dust Cup Capacity: 0.8 litres.
Cord Length: 7.5 metres.
Cleaning Modes: Carpet, Hard Floor, Area Rug.
Technology: DuoClean, Anti-Hair Wrap, LED lights.
Filters: Washable foam and felt filters.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 6.2 kg.
Voltage: 220-240V, 50Hz.

Controls and Settings

Main controls located on handle and floorhead.

Handle: Suction control slider, power button (on detachable pod). Floorhead: Surface dial (Carpet/Hard Floor), brushroll on/off switch. Body: Dust cup release button, hose release lever.

Settings: Adjust suction power via slider; select floor type via dial; turn brushroll on/off for delicate rugs; use LED lights toggle on floorhead.

Using Attachments

For above-floor cleaning, detach pod or use hose directly.

Detach pod: Press release button on back of vacuum to remove pod.
Attach tool: Connect desired tool to hose end or pod nozzle.
Select suction: Adjust slider for appropriate power.
Clean: Use tool on upholstery, stairs, ceilings, or tight spaces.
Reattach: Click pod back into vacuum body after use.

Tip: Store tools in built-in caddy when not in use.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet mode: Set floorhead dial to Carpet; brushroll spins for deep cleaning.
Hard floor mode: Set dial to Hard Floor; soft roller engages for debris pickup.
Area rug mode: Turn off brushroll (switch on floorhead) for delicate rugs.
Above-floor mode: Use detachable pod with attachments.
Suction control: Adjust slider for more/less power as needed.

WARNING! Always turn off and unplug before changing modes or attachments.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when cup is full.
Clean filters: Remove foam and felt filters; rinse monthly; air dry 24 hours.
Check brushroll: Remove debris wrapped around brushroll; clear any blockages.
Inspect hose: Detach and check for clogs; clear if necessary.
Wipe exterior: Use dry cloth to clean vacuum body.

CAUTION! Do not operate without filters. Ensure all parts are dry before reassembly.

Care & Storage

Unplug before storage. Store in a dry, cool place.

Wrap cord around cord hooks; store attachments in caddy; ensure dust cup is empty and filters are dry.

CAUTION! Do not store near heat sources or in damp areas.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and floorhead for blockages.
Brushroll not spinning	Debris wrap/switch off	Clear hair and debris from brushroll; ensure brushroll switch is on.
Vacuum won't turn on	Power cord/outlet	Check plug is secure; try different outlet; check household fuse.
Overheating	Blockage/filters dirty	Turn off, unplug, clear blockages; clean filters; let cool 60 minutes.
Detachable pod not working	Connection/power	Ensure pod is fully clicked into body; check power button on pod.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 0800 862 0453; www.sharkclean.co.uk