Shark V2950A Vacuum Cleaner Manual

The Shark V2950A is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister system, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with Lift-Away pod, Handle with controls, Motorized floor nozzle, Dust cup with HEPA filter, Hose, Wand, and Cleaning attachments.

Assembly & Setup

Unpack all parts from the box. Assemble on a flat, stable surface.

1. Attach the handle: Align the handle with the upright body and push down until it clicks into place.
2. Install the hose: Connect the hose end to the port on the front of the vacuum body.
3. Attach the wand: Insert the extension wand into the hose grip until it locks.
4. Attach floor nozzle: Slide the floor nozzle onto the bottom of the upright body until it clicks.
5. Install filters: Ensure the HEPA filter and pre-motor filter are correctly seated in the dust cup lid.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the power cord into a standard 120V outlet. Ensure all parts are securely connected.

1. Select cleaning mode: For floor cleaning, use in Upright mode. For above-floor cleaning, press the Lift-Away release button to detach the pod.
2. Adjust settings: Use the brushroll on/off switch for hard floors. Use suction control for delicate rugs.
3. Begin cleaning: Press the power switch to start. Move the vacuum slowly back and forth over the surface.
4. Empty dust cup: When full, unplug the vacuum, press the dust cup release, and empty contents into trash.

CAUTION! Do not vacuum large, hard objects or liquids. Keep hair, strings, and cords away from the brushroll.

Specifications

• Model: Shark V2950A.
• Type: Upright with Lift-Away canister.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Motorized, auto-adjusting for carpets/hard floors.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Attachments Included: Crevice tool, Upholstery tool, Dusting brush, Pet Multi-Tool.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 14 lbs.

Controls and Settings

Main controls located on the handle. Upright Body: Power switch, Brushroll on/off, Suction control slider, Lift-Away release button, Wand release button.

Indicator Lights: Filter check light alerts when filters need cleaning. Brushroll indicator shows when brushroll is engaged.

Settings: Power (On/Off), Brushroll (On for carpets/Off for hard floors), Suction (Max for deep clean/ Min for delicate rugs). Lift-Away Mode: Detach pod for portable cleaning. Handheld Mode: Use with attachments for detailed cleaning.

Using Attachments

For above-floor cleaning: Detach Lift-Away pod or use handheld mode.

1. Select attachment: Choose appropriate tool (crevice, upholstery, dusting brush).
2. Connect to hose or wand: Press the attachment onto the end of the hose or wand until it clicks.
3. Begin cleaning: Turn on power and guide the tool over the surface.
4. Switch attachments: To change, press the release button on the hose cuff and pull tool off.

Tip: Use the Pet Multi-Tool for removing pet hair from furniture and stairs.

Cleaning Modes

Three primary modes for versatile cleaning.

1. Upright Mode: For carpets and large floor areas. Keep pod attached to the floor nozzle.
2. Lift-Away Mode: Press release button to detach pod. Carry pod by handle; hose extends for cleaning stairs, under furniture, and ceilings.
3. Handheld Mode: Detach pod, remove wand, and connect attachment directly to hose for spot cleaning.

WARNING! Do not use the vacuum to pick up sharp objects, matches, or hot ashes. Do not use without filters installed.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty Dust Cup: Empty after each use or when full. Press release button, remove cup, and empty into trash.

Clean Filters: Rinse HEPA filter and pre-motor filter with cold water every month. Allow to dry completely for 24 hours before reinstalling.

Clear Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors to cut and remove strands.

Check for Blockages: If suction is weak, check hose, wand, and nozzle for clogs.

CAUTION! Always unplug vacuum before performing any maintenance. Do not use damaged filters.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum, wait 60 minutes, then plug back in.

Service: 1-800-798-7398; sharkclean.com