Shark V2950 Vacuum Cleaner Manual

The Shark V2950 is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering for maneuverability, and multiple cleaning modes for carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean brush roll, Anti-Allergen Complete Seal system, LED headlights, large dust cup, swivel steering, power switch, mode selector, attachment hose.

Assembly & Setup

Unpack and inspect contents. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Slide wand into handle until locked.
3. Attach hose: Connect hose to wand and body ports.
4. Install dust cup: Place dust cup into slot and press until locked.
5. Plug into AC power.

WARNING! Ensure all parts are securely connected. Do not force connections.

First-Time Use

Before cleaning, ensure assembly is complete and area is clear.

1. Select surface mode: Use mode selector for carpet or hard floor.
2. Turn on: Press power switch; LED lights will illuminate.
3. Begin cleaning: Push vacuum forward and back in overlapping strokes.
4. Empty dust cup: When full, press release button and empty into trash.

CAUTION! Keep vacuum away from water and wet surfaces.

Specifications

• Model: Shark V2950.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Dust Cup Capacity: 0.9 quarts.
• Cord Length: 25 feet.
• Cleaning Modes: Carpet, Hard Floor, Above Floor.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Power switch on body; mode selector on handle. Handle controls: Power button, mode button.

LED Indicators: Power on (blue), full dust cup (red).

Mode Selector: Carpet (for medium to high pile), Hard Floor (for wood, tile, laminate). Settings: Suction power (auto-adjusts based on surface), brush roll on/off (for delicate rugs). Maintenance: Dust cup release, filter access, brush roll cleaning.

Attachments & Accessories

Included: Crevice tool, dusting brush, upholstery tool, wand.

1. Turn off vacuum before attaching accessories.
2. Remove wand: Press wand release button.
3. Attach tool: Insert tool into wand or hose end.
4. Select above-floor mode for detailed cleaning.

Tip: Use crevice tool for tight spaces; dusting brush for shelves.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

1. Carpet mode: For rugs and carpets; brush roll agitates fibers.
2. Hard floor mode: For hard surfaces; brush roll retracts to prevent scattering.
3. Above-floor mode: Use attachments for furniture, stairs, ceilings.
4. Spot cleaning: Use hose with attachments for concentrated areas.

WARNING! Do not vacuum large objects, liquids, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean filters monthly: Rinse under water; air dry 24 hours.
3. Check brush roll monthly: Remove debris and hair.
4. Inspect hose for clogs; clear if necessary.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com