Shark V2700Z Vacuum Cleaner Manual

The Shark V2700Z is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering for maneuverability, multiple floor settings, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning & Maintenance 8. Storage & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, Dust cup with release, Floor nozzle with brushroll, Hose and wand, Attachments (crevice tool, dusting brush, upholstery tool).

FeatureDescription
DuoClean TechnologyDual brushrolls for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Large Capacity Dust CupEasy-empty, bagless design
Swivel SteeringEnhanced maneuverability around furniture
Floor Selector SwitchAdjusts suction for carpets or hard floors
Power ButtonTurns vacuum on/off
Brushroll On/OffDisengages brushroll for delicate rugs
Wand Release ButtonReleases wand for above-floor cleaning
Hose Access PortFor connecting attachments

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

  1. Attach handle: Align handle with main body until it clicks into place.
  2. Insert wand: Slide wand into the hose port until secure.
  3. Attach floor nozzle: Connect nozzle to the bottom of the vacuum body.
  4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; follow operational steps.

  1. Select floor setting: Use switch for carpets or hard floors.
  2. Power on: Press POWER button on handle.
  3. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
  4. Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Controls and Settings

All controls located on handle. Power Button: Turns motor on/off. Floor Selector: Toggle between Carpet and Hard Floor. Brushroll Switch: Turns brushroll on/off for area rugs. Wand Release: Press to detach wand for above-floor cleaning.

LED Indicators: Lights indicate power status and brushroll engagement.

Suction Settings: Use floor selector for optimal cleaning. Brushroll Control: Disengage for delicate surfaces. Handle Controls: Ergonomic design for easy access.

Using Attachments

For above-floor cleaning: Detach wand, connect desired attachment.

  1. Turn off vacuum and unplug before changing attachments.
  2. Press wand release button to remove wand.
  3. Connect attachment (crevice tool, dusting brush, etc.) to wand end.
  4. Plug in vacuum and power on to use.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release, empty contents into trash.
  2. Clean filters: Remove and rinse foam/felt filters monthly; air dry completely.
  3. Clear brushroll: Remove debris wrapped around brushroll with scissors.
  4. Check hose/wand: Remove clogs with long object.
  5. Inspect cord: Check for damage before each use.

WARNING! Always unplug vacuum before maintenance. Do not use water on electrical parts.

Storage & Care

Store in cool, dry place. Wrap cord around cord hooks. Empty dust cup before storage.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC; trademarks owned by SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck plug connection; try different outlet; ensure power button pressed.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose/wand for clogs; clean filters.
Brushroll not spinningDebris/switchClear brushroll of debris; ensure brushroll switch is ON.
Vacuum overheatingClog/filtersUnplug, let cool; check for clogs; clean filters.
Unusual noiseForeign objectTurn off, unplug; inspect brushroll and hose for obstructions.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com

Shark V2700Z Vacuum Cleaner Manual © - All Rights Reserved 2025