Shark V1950 N Vacuum Cleaner Manual

The Shark V1950 N is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes (carpet, hard floor, above-floor), a motorized brushroll, swivel steering for maneuverability, a large-capacity dust cup, washable filters, and various attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, Motorized brushroll, Dust cup with release, Hose and wand, Attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
Powerful Suction	High-performance motor for deep cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
Motorized Brushroll	Agitates carpets to remove embedded dirt
Swivel Steering	Provides easy maneuverability around furniture
Large Dust Cup	0.9-gallon capacity for less frequent emptying
Washable Filters	Reusable foam and felt filters
Cleaning Modes	Carpet, Hard Floor, Above-Floor settings
Attachments	Included tools for versatile cleaning
Power Cord	25-foot length for extended reach
On-Board Storage	Convenient holder for attachments

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach handle: Align handle with main body and secure with provided screws.
Install wand: Insert wand into hose connector until it clicks.
Attach hose: Connect hose to vacuum inlet and wand.
Install filters: Place foam and felt filters into their compartments.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Check filters: Ensure foam and felt filters are properly seated.
Select surface setting: Use dial to choose Carpet or Hard Floor mode.
Adjust suction: Use power switch for low/high suction as needed.
Test attachments: Connect desired tool to wand for above-floor cleaning.
Empty dust cup: Press release button to remove and empty cup after use.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum liquids.

Specifications

Model: Shark V1950 N.
Type: Upright vacuum cleaner.
Suction Power: Adjustable via power switch.
Filtration: HEPA filtration system with washable filters.
Dust Cup Capacity: 0.9 gallons.
Cord Length: 25 feet.
Attachments Included:Crevice tool, dusting brush, upholstery tool.
Weight: 15.4 lbs.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle. Power Switch: Turns vacuum on/off and selects suction level. Surface Dial: Adjusts brushroll height for carpet or hard floors. Hose Release: Button to detach hose for above-floor cleaning. Dust Cup Release: Lever to remove dust cup for emptying.

Settings: Carpet Mode (brushroll engaged), Hard Floor Mode (brushroll off), Above-Floor (using attachments). Suction: Low for delicate rugs, High for deep cleaning.

Using Attachments

Attach tools to wand for specialized cleaning.

Detach hose: Press hose release button on vacuum body.
Connect tool: Insert desired attachment into wand end.
Select suction: Use power switch for appropriate suction level.
Clean: Use tool on upholstery, stairs, crevices, or dust surfaces.
Store: Return attachments to on-board storage after use.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet Mode: Set dial to carpet icon; brushroll agitates fibers.
Hard Floor Mode: Set dial to hard floor icon; brushroll disengages.
Above-Floor Mode: Detach hose and use attachments for furniture, drapes, etc.
Suction Control: Adjust power switch for low (delicate) or high (power) suction.

WARNING! Do not use carpet mode on hard floors as it may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release lever; empty after each use.
Clean filters: Rinse foam and felt filters monthly; air dry completely.
Clear brushroll: Remove debris from brushroll regularly.
Check hose/wand: Remove clogs if suction decreases.
Inspect power cord: Ensure cord is undamaged.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filters	Empty dust cup; clean filters; check hose for clogs.
Brushroll not spinning	Debris entanglement	Unplug vacuum; clear brushroll of hair and debris.
Vacuum won't turn on	Power source/switch	Check outlet; ensure power switch is on; inspect cord.
Overheating	Clogged filters/full dust cup	Clean filters; empty dust cup; let vacuum cool for 30 minutes.
Unusual noise	Foreign object in brushroll/hose	Unplug; inspect brushroll and hose; remove obstruction.

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com