Shark V1828GW Vacuum Cleaner Manual

The Shark V1828GW is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister for above-floor cleaning, a HEPA filter, multiple brush rolls for different surfaces, LED headlights, and a large-capacity dust cup. It includes various attachments for cleaning carpets, hard floors, upholstery, and crevices. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright vacuum body, Lift-Away canister, HEPA filter, motorized brush roll, LED headlights, dust cup, crevice tool, upholstery tool, dusting brush, and power cord.

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

1. Attach handle: Insert handle into upright body until it clicks into place.
2. Install brush roll: Ensure brush roll is properly seated and free of debris.
3. Attach hose: Connect hose to vacuum body and canister.
4. Insert HEPA filter: Place filter into designated slot in dust cup.
5. Attach tools: Store tools on onboard caddy or canister.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

1. Check brush roll: Ensure it rotates freely and is set for your floor type.
2. Adjust suction: Use suction control slider for delicate rugs or heavy carpets.
3. Test attachments: Try each tool to ensure proper connection.
4. Empty dust cup: Start with empty cup for optimal performance.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

• Model: Shark V1828GW.
• Type: Upright vacuum with Lift-Away canister.
• Filtration: HEPA filter system.
• Brush Roll: Motorized; on/off switch for carpets/hard floors.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, suction control slider, brush roll on/off button. Body: Dust cup release, hose release, cord wrap.

Settings: Carpet mode (brush roll on), Hard floor mode (brush roll off), Lift-Away mode (detach canister for above-floor cleaning). Suction control: Adjust for high/low power.

Using Attachments

Attach tools to hose or canister for specialized cleaning.

1. Detach hose: Press hose release button on canister.
2. Select tool: Insert crevice, upholstery, or dusting tool into hose end.
3. Clean: Use tool on surfaces like stairs, furniture, or blinds.
4. Return: Store tools on caddy when not in use.

Tip: Ensure hose is fully inserted into tool for secure connection.

Cleaning Modes

Three main modes: Upright, Lift-Away, and handheld.

1. Upright mode: For carpets and large floor areas; brush roll engaged.
2. Lift-Away mode: Detach canister to clean above floors, stairs, and under furniture.
3. Handheld mode: Use hose with attachments for spot cleaning.
4. Brush roll control: Turn off for hard floors to avoid scattering debris.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty after each use.
2. Clean filter: Rinse HEPA filter under cold water every month; air dry 24 hours.
3. Clear brush roll: Remove hair and debris from brush roll weekly.
4. Check hose: Remove clogs with long object if suction reduces.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Model V1828GW meets U.S. household vacuum standards.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com