Shark V1510C Vacuum Cleaner Manual

The Shark V1510C is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brushroll, Lift-Away® technology for portable cleaning, HEPA filtration, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motorized brushroll, Dust cup with HEPA filter, Lift-Away pod, Hose, Wand, and various cleaning attachments.

Feature	Description
Lift-Away® Technology	Detachable pod for portable cleaning above floors
Multi-Surface Brushroll	Automatically adjusts between carpets and hard floors
HEPA Filtration System	Traps 99.9% of dust and allergens
Powerful Suction	Maintains consistent suction across all surfaces
Large Capacity Dust Cup	Easy-to-empty, bagless design
Attachments Included	Pet Multi-Tool, Crevice Tool, Dusting Brush, Upholstery Tool
Power Switch	Turns vacuum cleaner on/off
Brushroll On/Off	Disables brushroll for hard floor cleaning
Carpet Height Adjustment	Manual dial for different pile heights
Wand Release Button	Quickly detaches wand for above-floor cleaning

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

Attach the handle: Insert handle into the main body until it clicks into place.
Connect the hose: Attach hose to the designated port on the vacuum body.
Install the wand: Insert wand into the hose cuff until secure.
Attach cleaning tools: Store tools on the onboard caddy or attach to wand as needed.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll during installation.

First-Time Use

Before cleaning, perform a quick setup check.

Check brushroll: Ensure it spins freely and is clear of debris.
Empty dust cup: Ensure it is empty and filter is properly seated.
Select floor setting: Adjust carpet height dial to match your flooring.
Power on: Plug in, then press the power switch to begin cleaning.
Test attachments: Connect tools to wand for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep cord clear of brushroll.

Specifications

Model: Shark V1510C.
Type: Upright with Lift-Away®.
Filtration: HEPA filter, washable foam and felt filters.
Dust Cup Capacity: 1.2 dry quarts.
Cord Length: 25 feet.
Attachments: Pet Multi-Tool, Crevice Tool, Dusting Brush, Upholstery Tool.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the handle and body.

Handle Controls: Power switch, Brushroll on/off button, Wand release button.

Body Controls: Carpet height adjustment dial, Lift-Away release button, Dust cup release latch.

Settings: Carpet height (Low Pile, Medium Pile, High Pile, Bare Floor), Brushroll on/off for hard floors, Suction control via attachment selection.

Using Attachments

For above-floor cleaning, detach the Lift-Away pod.

Press the Lift-Away release button to detach the pod.
Attach desired tool directly to the hose or to the end of the wand.
Use Pet Multi-Tool for pet hair on furniture, Crevice Tool for tight spaces, Dusting Brush for shelves, Upholstery Tool for sofas and curtains.
Reattach pod by aligning and pressing until it clicks into place.

Tip: Ensure the vacuum is turned off when switching attachments.

Cleaning Modes

Two primary cleaning modes: Upright mode and Lift-Away mode.

Upright Mode: For floor cleaning. Use power switch and carpet height dial.
Lift-Away Mode: Press release button to detach pod for portable cleaning of stairs, furniture, and ceilings.
Above-Floor Cleaning: Connect wand and tools to the hose for detailed cleaning.
Brushroll Control: Turn brushroll off when cleaning hard floors or delicate rugs.

WARNING! Do not use the vacuum to pick up sharp objects, which could damage the brushroll or hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use. Wash foam and felt filters every 3 months. Replace HEPA filter every 12-18 months. Check brushroll for tangled hair and debris monthly; cut and remove with scissors. Inspect hose and wand for clogs periodically.

CAUTION! Unplug vacuum before performing any maintenance. Allow all filters to dry completely before reinstalling.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; inspect hose and wand for blockages.
Brushroll not spinning	Tangled debris, belt issue	Turn off and unplug; remove debris from brushroll; inspect belt for wear.
Vacuum won't turn on	Power cord, outlet, or switch	Check power cord connection; test outlet; ensure power switch is engaged.
Lift-Away pod not detaching	Release button obstructed	Ensure no debris is blocking the release mechanism; press firmly.
Unusual noise	Foreign object in brushroll or hose	Turn off immediately; inspect brushroll chamber and hose for obstructions.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com