Shark V1510 Vacuum Cleaner Manual

The Shark V1510 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brushroll, multiple height adjustments, a large-capacity dust cup, HEPA filtration, various attachments for above-floor cleaning, and a lightweight, maneuverable design. Below are key sections covering safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motorized brushroll, Height adjustment lever, Dust cup with quick-release, HEPA filter, Hose and wand, On-board tool storage, Power switch, Cord wrap.

Feature	Description
Motorized brushroll	Deep cleans carpets and agitates embedded dirt
Height adjustment lever	5 settings for different floor types (bare floor to plush carpet)
Dust cup with quick-release	Large capacity, easy-empty container
HEPA filter	Captures 99.9% of dust and allergens
Hose and wand	Extends for above-floor cleaning
On-board tool storage	Holds crevice tool and upholstery brush
Power switch	Turns vacuum on/off
Cord wrap	Integrated cord storage hooks
Headlight	Illuminates dark areas under furniture
Swivel steering	Maneuvers easily around obstacles

Assembly & Setup

Unpack all parts and inspect for damage. Assemble before first use.

Attach handle: Insert handle into body until it clicks securely into place.
Install wand: Insert wand into hose port on front of vacuum.
Attach hose: Connect hose to wand and secure to side clips.
Mount tools: Place crevice tool and upholstery brush in on-board storage clips.
Check filters: Ensure both pre-motor and HEPA filters are properly seated.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in power cord, select appropriate settings, and begin cleaning.

Adjust height: Use lever to set correct height for your floor type.
Turn on: Press power switch to activate suction and brushroll.
Vacuum floors: Push vacuum forward and back in overlapping strokes.
Use attachments: Detach wand and select tool for furniture, stairs, or edges.
Empty dust cup: Press release button and empty when full or after each use.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum large objects.

Specifications

Model: Shark V1510 Upright Vacuum.
Power: 120V, 60Hz, 10 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Filtration: HEPA filter with foam and felt pre-motor filter.
Brushroll: Motorized, anti-hair wrap technology.
Height Settings: 5 positions.
Attachments: Crevice tool, upholstery brush, dusting brush.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Power Switch: On/Off. Height Adjustment Lever: 5 settings (1 for bare floors, 5 for thick carpets). Brushroll On/Off: Switch to turn brushroll on for carpets or off for hard floors. Hose Release: Button to detach hose for above-floor cleaning. Dust Cup Release: Button to remove dust cup for emptying.

Tip: For best results on carpets, set height so vacuum glides smoothly with slight resistance.

Using Attachments

For above-floor cleaning: furniture, stairs, ceilings, vents.

Turn off vacuum and detach wand from body.
Select tool: Attach crevice tool for tight spaces; upholstery brush for fabrics.
Connect to hose: Insert tool into end of wand or hose.
Turn on vacuum and clean target area.
Return tools to storage clips after use.

Tip: Use dusting brush for delicate surfaces like blinds and lampshades.

Cleaning Modes

Adapts to different surfaces and cleaning needs.

Carpet mode: Brushroll on, height adjusted for carpet pile.
Hard floor mode: Brushroll off or on lowest setting to avoid scattering debris.
Above-floor mode: Use hose and attachments for furniture, stairs, drapes.
Edge cleaning: Use suction from side of vacuum head to clean along baseboards.
Spot cleaning: Use hose with appropriate tool for concentrated areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects that could damage brushroll or hose.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup after each use or when full.
Clean filters: Rinse pre-motor filter monthly; replace HEPA filter every 6-12 months.
Clear brushroll: Remove hair and threads regularly; lift cover to access.
Check for clogs: Inspect hose, wand, and air passages if suction decreases.
Store properly: Wrap cord, clean exterior with dry cloth.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinstalling.

Regulatory Information

UL Listed; complies with U.S. safety standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty. Refer to warranty card for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clog, dirty filters	Empty dust cup; check hose/wand for blockages; clean or replace filters.
Brushroll not spinning	Obstruction, belt issue, switch off	Clear hair/debris from brushroll; check belt for wear; ensure brushroll is turned on.
Vacuum won't turn on	Power source, cord, switch	Check outlet; inspect cord for damage; ensure power switch is engaged.
Leaving debris behind	Height setting, full dust cup	Adjust height lower; empty dust cup; slow cleaning strokes.
Overheating	Clogged filters, blockage	Unplug and let cool; clean filters; clear any obstructions in air path.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com