Shark V1310RS Vacuum Cleaner Manual

The Shark V1310RS is a versatile upright vacuum cleaner featuring a powerful motor, advanced swivel steering for easy maneuverability, a Lift-Away canister for portable cleaning above the floor, a HEPA filter for allergen capture, multiple cleaning modes (carpet, hard floor, above floor), a motorized brushroll, and a variety of attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away canister, Motorized brushroll, HEPA filter system, Hose and wand assembly, On-board attachment holder.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

1. Attach the handle: Align the handle with the upright body until it clicks into place.
2. Install the wand: Insert the wand into the hose port on the front of the vacuum until secure.
3. Attach the hose: Connect the hose to the port on the back of the vacuum body.
4. Mount attachments: Place the crevice tool, dusting brush, and upholstery tool onto the on-board holders.
5. Plug into a standard 120V AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from the brushroll during assembly.

First-Time Use

Before first use, ensure the dust cup and filters are properly installed.

1. Check filters: Ensure the HEPA filter and pre-motor filter are correctly seated in their compartments.
2. Select cleaning mode: Set the floor selector switch to "CARPET" or "HARD FLOOR" as needed.
3. Adjust height (if applicable): Some models have a manual height adjustment for different carpet pile heights.
4. Power on: Press the power foot pedal or switch to begin vacuuming.
5. Test attachments: Briefly use each attachment to ensure proper connection and suction.

CAUTION! Do not vacuum large, hard, or wet objects. Ensure the brushroll is off when cleaning delicate area rugs.

Specifications

• Model: Shark V1310RS.
• Type: Upright with Lift-Away canister.
• Motor: Powerful suction motor with advanced cyclonic technology.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 dry quarts.
• Cleaning Path: 10 inches.
• Attachments Included: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 14 lbs.

Controls and Settings

Main controls are located on the handle and body of the vacuum.

Handle: Power switch, Brushroll on/off switch, Wand release button.

Body: Floor selector (Carpet/Hard Floor), Lift-Away release latch, Dust cup release button, Hose release button.

Operation: Use the power switch to turn the vacuum on/off. Select the appropriate floor setting. Use the brushroll switch to engage or disengage the brushroll. Press the Lift-Away release to detach the canister for portable cleaning.

Using Attachments

For detailed cleaning of upholstery, stairs, ceilings, and tight spaces.

1. Detach the wand: Press the wand release button and pull the wand out.
2. Choose an attachment: Select the crevice tool, dusting brush, or upholstery tool from the on-board holder.
3. Connect: Insert the attachment into the end of the wand or hose until it clicks.
4. Clean: Guide the attachment over the surface. The vacuum's suction will draw in debris.
5. Return: Detach and store the attachment back on the holder when finished.

Tip: For best results on upholstery, use the brush tool to gently agitate the fabric while vacuuming.

Cleaning Modes

The V1310RS offers three primary cleaning modes.

1. Upright Carpet Mode: Use for cleaning carpets and large area rugs. Ensure brushroll is ON.
2. Upright Hard Floor Mode: Use for wood, tile, laminate, and vinyl. Set floor selector to HARD FLOOR; brushroll can be ON or OFF.
3. Lift-Away Mode: Press the release latch to detach the canister. Use the hose and wand with attachments to clean stairs, furniture, blinds, and other above-floor areas.

WARNING! Do not use the brushroll on delicate, fringe, or tasseled rugs. Always turn the vacuum off before changing modes.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Emptying the Dust Cup: Press the release button, remove the dust cup, and empty contents into a trash bin. Do not overfill.

Cleaning the Filters:

1. Pre-Motor Foam Filter: Rinse with cold water every month. Let air dry for 24 hours completely before reinstalling.
2. HEPA Filter: Gently tap to remove loose dust every 3 months. Replace every 12-18 months under normal use.

Clearing Brushroll Clogs: Turn vacuum off and unplug. Use scissors to carefully cut and remove hair, strings, or fibers wrapped around the brushroll.

Checking for Blockages: If suction is weak, check the hose, wand, and air pathways for obstructions.

Care & Storage

Unplug the vacuum before cleaning or maintenance. Wipe the exterior with a dry or slightly damp cloth. Do not use abrasive cleaners.

Storage: Wrap the power cord around the cord hooks. Store the vacuum in a cool, dry place. Ensure all filters are completely dry before storing after cleaning.

CAUTION! Never immerse the vacuum, hose, or electrical parts in water. Do not store near heat sources.

Regulatory Information

This appliance complies with relevant FCC standards for home use. Copyright © SharkNinja Operating LLC. Shark and V1310RS are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact customer service at 1-800-798-7398.

Troubleshooting

Reset: Unplug the vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com